Files
MeshCore/variants/t1000-e/T1000eBoard.cpp
T

92 lines
2.4 KiB
C++

#include <Arduino.h>
#include <Wire.h>
#include "T1000eBoard.h"
#ifdef PIN_BUZZER_EN
#include <NonBlockingRtttl.h>
#endif
void T1000eBoard::begin() {
NRF52BoardDCDC::begin();
btn_prev_state = HIGH;
#ifdef BUTTON_PIN
pinMode(BATTERY_PIN, INPUT);
pinMode(BUTTON_PIN, INPUT);
pinMode(LED_PIN, OUTPUT);
#endif
#if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
#endif
Wire.begin();
delay(10); // give sx1262 some time to power up
}
void T1000eBoard::attachDynamicPrefs(KeyValueStore* prefs) {
_prefs = prefs;
#ifdef PIN_BUZZER_EN
char val[8];
val[0] = 0;
_prefs->getByKey("buzzer", val, sizeof(val) - 1);
_buzzer_muted = strcmp(val, "0") == 0;
#endif
}
#ifdef PIN_BUZZER_EN
static void playTune(const char* tune) {
if (rtttl::isPlaying()) rtttl::stop();
rtttl::begin(PIN_BUZZER, tune);
}
#endif
void T1000eBoard::setBuzzerEnabled(bool enable) {
#ifdef PIN_BUZZER_EN
_buzzer_muted = !enable;
digitalWrite(PIN_BUZZER_EN, enable ? HIGH : LOW);
#endif
}
void T1000eBoard::loop() {
NRF52BoardDCDC::loop();
#ifdef PIN_BUZZER_EN
if (!rtttl::done()) rtttl::play();
if (_buzzer_mute_pending && rtttl::done()) { // mute once the confirmation beep has finished
_buzzer_mute_pending = false;
setBuzzerEnabled(false);
}
if (_buzzer_muted) digitalWrite(PIN_BUZZER_EN, LOW); // keep it off even if the UI re-enables it
#endif
}
bool T1000eBoard::handleCommand(const char* command, uint32_t sender_timestamp, char* reply) {
#ifdef PIN_BUZZER_EN
if (strcmp(command, "get buzzer") == 0) {
sprintf(reply, "> %s", (_buzzer_muted || _buzzer_mute_pending) ? "off" : "on");
return true;
}
if (memcmp(command, "set buzzer ", 11) == 0) {
if (strcmp(&command[11], "on") == 0) {
_buzzer_mute_pending = false;
setBuzzerEnabled(true);
if (_prefs) _prefs->setByKey("buzzer", "1");
playTune("MsgRcv3:d=4,o=6,b=200:32e,32g,32b,16c7"); // same tune as a new message
strcpy(reply, "OK - buzzer on");
} else if (strcmp(&command[11], "off") == 0) {
setBuzzerEnabled(true);
_buzzer_mute_pending = true;
if (_prefs) _prefs->setByKey("buzzer", "0");
playTune("ack:d=32,o=8,b=120:c"); // same beep as an ack, before going quiet
strcpy(reply, "OK - buzzer off");
} else {
strcpy(reply, "Error: state must be on or off");
}
return true;
}
#endif
return false; // not handled
}