MeshCore

mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-08-15 15:49:46 +00:00

Files

T

Adam Gessaman c58c9b2f31 fix(station-g3): apply FEM PA level at TX start

PA PL1 re-targets the PA's DC-DC supply rail rather than selecting a
logic-level gain, and the serial CLI is serviced on every main-loop pass
regardless of whether a transmit is in flight. A `set radio.fem.txgain`
write could therefore move the rail mid-transmit, while the SX1262 was
still driving the PA at full input power.

Record the requested level in setPAGainEnable() and drive the pin from
setTxModeEnable(), which runs from onBeforeTransmit() ahead of
startTransmit(). The level only matters while transmitting, so deferring
costs nothing.

Document that the pref is saved immediately but applied at the next
transmit, so `get radio.fem.txgain` can lead the hardware until then.

2026-08-08 14:53:57 -07:00

_assets

update docs logo

2026-03-31 00:51:15 +13:00

_stylesheets

refactor documentation

2026-02-04 00:59:13 +13:00

cli_commands.md

fix(station-g3): apply FEM PA level at TX start

2026-08-08 14:53:57 -07:00

companion_protocol.md

Merge pull request #2636 from sefinek/fix/cmd-device-query-typo