Files
MeshCore/docs
Olexandr Tyshchenko da1828fd9d Companion: set/get adc.multiplier CLI command, persisted in prefs
Repeaters, room servers and sensors already let the battery ADC multiplier be tuned with 'set adc.multiplier' (CommonCLI). The companion firmware had no equivalent, so a board whose divider differs from the build default (common on DIY ProMicro / Faketec boards) always reported a wrong battery voltage.

Adds the same command to the companion CLI. The value is stored in the companion prefs (comp.adc_mult, 0 = board default) and applied at startup via MainBoard::setAdcMultiplier().
2026-11-08 18:07:58 +02:00
..
2026-03-31 00:51:15 +13:00
2026-02-04 00:59:13 +13:00
2026-02-04 00:59:13 +13:00
2026-02-12 17:12:23 +13:00
2026-09-13 11:40:25 +10:00
2026-07-06 02:04:56 +12:00