mirror of
https://github.com/MeshTender/MeshTender.git
synced 2026-09-09 13:15:33 +00:00
25 lines
2.2 KiB
SQL
25 lines
2.2 KiB
SQL
-- +goose Up
|
|
-- These commands are gated to the local serial console in the firmware
|
|
-- (CommonCLI.cpp / simple_repeater MyMesh.cpp guard them with
|
|
-- `sender_timestamp == 0`), so they never run over the mesh — which is the only
|
|
-- way MeshTender sends commands. Remove them so they don't appear in the
|
|
-- catalog, console, or permission tiers.
|
|
-- stats-packets / stats-radio / stats-core, erase, set freq, set prv.key (serial only)
|
|
-- get acl (repeater, serial only)
|
|
-- NOTE: get freq, set radio, set public.key and set role are NOT serial-gated,
|
|
-- so they stay (retuning over the air uses `set radio <f,bw,sf,cr>`).
|
|
DELETE FROM command_catalog WHERE key IN (
|
|
'stats-packets', 'stats-radio', 'stats-core', 'erase', 'set.freq', 'set.prv_key', 'get.acl'
|
|
);
|
|
|
|
-- +goose Down
|
|
-- Restore the rows to their post-0017 state (arity/description + reclassified flags).
|
|
INSERT INTO command_catalog (key, template, category, args, arity, description, risky, in_share_default, in_org_member_default, in_org_admin_default) VALUES
|
|
('stats-packets', 'stats-packets', 'diag', '', 0, 'Shows packet counters (serial only)', FALSE, TRUE, TRUE, TRUE),
|
|
('stats-radio', 'stats-radio', 'diag', '', 0, 'Shows radio stats: noise floor, RSSI, SNR, airtime (serial only)', FALSE, TRUE, TRUE, TRUE),
|
|
('stats-core', 'stats-core', 'diag', '', 0, 'Shows core stats: battery, uptime, queues (serial only)', FALSE, TRUE, TRUE, TRUE),
|
|
('erase', 'erase', 'danger', 'wipes the node', 0, 'Factory-resets and wipes the node (serial only)', TRUE, FALSE, FALSE, FALSE),
|
|
('set.freq', 'set freq <MHz>', 'radio', '', 1, 'Sets the frequency (MHz); requires reboot', FALSE, TRUE, FALSE, TRUE),
|
|
('set.prv_key', 'set prv.key <hex>','danger', 'changes identity', 1, 'Sets the private key (changes identity); requires reboot', TRUE, FALSE, FALSE, FALSE),
|
|
('get.acl', 'get acl', 'diag', 'serial only', 0, 'Lists the access-control list', FALSE, TRUE, FALSE, TRUE);
|