The scan only sees NFC data. It cannot sense whether a label's display
listens for infrared or radio, so the messages now say what was found
instead of naming a vendor or a transport as fact.
- "VUSION tag / SES-imagotag uses radio, not IR" becomes "Likely radio
tag / Link: nfc.imagotag.com / TagTinker is IR-only".
- Match an http:// or https:// link whose host is nfc.imagotag.com
(case-insensitive), as prefix code 0x03/0x04 or inline after 0x00,
instead of the substring "imagotag" anywhere in the URL. A "://"
inside a path, query or fragment is not taken as the scheme.
- "Not a Pricer tag" becomes "Unrecognized tag / No ID TagTinker can
decode"; "Unsupported chip" becomes "Unreadable chip / Chip answered
but no data was read".
- Move the decision into tagtinker_nfc_classify() so it can be tested
off-device.
- De-duplicate on UID and result together. The firmware reports a read
that stops partway as a success with fewer pages, so a UID-only check
could keep a tag stuck on "Unrecognized tag" after a partial first
read.
- Announce an unreadable chip once until the field is empty. Those reads
carry no UID, so UID de-duplication never applied and the message
repeated on every poll.
- Bring the prompt back from the scene tick instead of a popup callback.
A popup with a callback consumes every short press, so Back only
dismissed the message and a second Back was needed to leave.
- Stop the scanner on the Back event rather than waiting for on_exit, so
the poll loop is already winding down when the scene is popped and the
join there is as short as possible. On device, leaving from a message
takes exactly one Back.
- Move custom event ids to 200+. NfcScanEventSuccess was 100, the same
id as the target menu's "+ Type Barcode" item.
- Stop the scan LED when "Target list full" ends scanning.
- README: add "Which tags work", with vendor-documented radio examples
and a table of what each scan message means.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
cloud_client.h hard-coded the worker URL, and wrangler.toml pointed users
at a "WiFi Setup -> Server URL" field that has never existed, so anyone
self-hosting cloud-plugins/ had to edit a header. cloud_client_set_url()
exists but has no callers, and the UART protocol has no frame for it.
Add CONFIG_TT_CLOUD_URL (Kconfig.projbuild, menu "TagTinker") defaulting
to the current URL, and take TT_CLOUD_DEFAULT_URL from it. Setting it in
sdkconfig.defaults or through menuconfig is now enough; rebuild and
reflash still apply, and there is no hidden run-time channel.
Also says so in wrangler.toml and the README WiFi Plugins bullet.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- README: the IR engine allocates heap for payloads, so drop
"zero-allocation"; the drop folder takes the 1-bit and two-plane BMPs
the image preparer exports, not any BMP, and type 1626 targets cap
files at 24 KB; NFC scan only fills the barcode when the tag's NFC
data decodes; there is no test-pattern feature; the FAQ now says this
app needs a Flipper even though the protocol does not.
- CONTRIBUTING: the Android companion app was removed in d608afb.
- wrangler.toml pointed users at a "WiFi Setup -> Server URL" field that
never existed. Say how the URL is actually set today.
- cloud_client.h described a runtime override through
cloud_client_set_url(), which nothing calls.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- .github/workflows/build.yml: build the Flipper FAP (ufbt, release + dev
SDK channels), the Cloudflare Worker (tsc + wrangler dry-run bundle) and
the ESP32-S2 firmware (ESP-IDF v5.2.8) on every push to main and every
pull request; syntax-check the inline scripts of the web image-prep page;
run `ufbt lint` as a non-blocking advisory job. No path filters, because
the shared UART protocol header is compiled into both the FAP and the
ESP firmware.
- Makefile: one entry point for developers (setup, build-all, build-fap,
build-worker, build-esp, launch, flash-esp, serve-web, lint, clean).
Works with the stock GNU Make 3.81 on macOS. Auto-detects the ESP-IDF
Python virtualenv when export.sh would otherwise look for one matching
a newer system python3.
- esp32-wifi-fw/sdkconfig.defaults: pin CONFIG_IDF_TARGET="esp32s2" so
clean builds (CI, fresh clones) no longer fall back to plain esp32.
- cloud-plugins/package.json: add the `build` script (wrangler dry-run
bundle) that the Makefile and CI rely on.
- README/CONTRIBUTING: document the make targets and CI; add a build badge.
- .gitignore: ignore .venv/ and the .clang-format generated by ufbt lint.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- Flipper FAP: WiFi Setup, Plugins picker, plugin-run scene wired into
Targeted Payloads -> <tag> -> WiFi Plugins
- Framed UART link to the dev board with bulk-read RX path and 16 KB
stream buffer to keep up with full plugin bursts
- ESP firmware: 900 KB UART<->HTTPS bridge, USB-Serial-JTAG console,
cert-bundle TLS, 16 KB worker stack to host mbedTLS handshake
- Cloudflare Worker: Crypto, Weather, Identicon plugins out of the
box; new plugins are a single TypeScript file, no Flipper reflash
- Shared protocol header + 1bpp BMP writer that matches web-image-prep
palette/stride conventions
- Add web-image-prep/: self-contained HTML5 image preparer with
perceptual Oklab 3-colour quantisation, Floyd-Steinberg/Atkinson/
Bayer dither, all supported tag profiles, BMPs that match the FAP
reader exactly. Auto-deployed to GitHub Pages.
- Add 'Set Image' under Targeted Payloads. Lists every BMP in
apps_data/tagtinker/dropped/, scrolls long names, marks foreign-
resolution files with a '~' prefix.
- Stream-time nearest-neighbour rescaling so any BMP can target any
tag at any page; image options screen is now Page-only.
- Remove Phone Sync menu and the Android companion app: replaced by
the browser preparer + drop folder.
- Static, IR-friendly transmit screen ('Tinkering Tag', point hint,
3-dot loader, 'Flipped ;)').
I12BP8