dandri/ZephCore
1
0 Fork 0
mirror of https://github.com/liquidraver/ZephCore.git synced 2026-10-23 12:12:46 +00:00
Code Issues Packages Projects Releases Wiki Activity

x1 debug

Browse Source
This commit is contained in:
liquidraver committed 2026-08-10 19:15:26 +02:00
1 parent 329d0058fb
commit 3494411f83
25 files changed
+659 -63
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

zephcore/helpers/CommonCLI.cpp
+39
View File
@@ -134,6 +134,7 @@ void CommonCLI::loadPrefs(const char* path) {
ok = ok && prefs_read(&file, &_prefs->cad_offset, sizeof(_prefs->cad_offset)); // 298
ok = ok && prefs_read(&file, &_prefs->probe_interval, sizeof(_prefs->probe_interval)); // 299
ok = ok && prefs_read(&file, &_prefs->cad_busycap, sizeof(_prefs->cad_busycap)); // 300
ok = ok && prefs_read(&file, _prefs->extra_sf, sizeof(_prefs->extra_sf)); // 301-303
if (!ok) {
LOG_WRN("Prefs file %s truncated, some fields use defaults", path);
@@ -265,6 +266,7 @@ void CommonCLI::savePrefs(const char* path) {
fs_write(&file, &_prefs->cad_offset, sizeof(_prefs->cad_offset));
fs_write(&file, &_prefs->probe_interval, sizeof(_prefs->probe_interval));
fs_write(&file, &_prefs->cad_busycap, sizeof(_prefs->cad_busycap));
fs_write(&file, _prefs->extra_sf, sizeof(_prefs->extra_sf));
fs_close(&file);
LOG_INF("Saved prefs to %s", path);
@@ -606,6 +608,17 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
if (_callbacks->formatCadStatus(reply + n, (int)cap - n) == 0) {
strcpy(reply, "not available");
}
} else if (memcmp(config, "extra.sf", 8) == 0) {
char* dp = reply;
dp += sprintf(dp, "> ");
int shown = 0;
for (int i = 0; i < EXTRA_SF_MAX && _prefs->extra_sf[i] != 0; i++) {
dp += sprintf(dp, "%s%u", shown++ ? "," : "",
(unsigned)_prefs->extra_sf[i]);
}
if (shown == 0) {
strcpy(reply, "> none");
}
} else if (memcmp(config, "meshtimesync", 12) == 0) {
MeshTimeSync* ts = _callbacks->getMeshTimeSync();
if (ts == nullptr) {
@@ -761,6 +774,32 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
} else if (memcmp(config, "cad.reset", 9) == 0) {
_callbacks->resetCadStats();
strcpy(reply, "OK - CAD probe stats cleared");
} else if (memcmp(config, "extra.sf ", 9) == 0) {
/* LR2021 side detectors: up to 3 extra SFs received alongside
* `sf`. "0" / "off" clears the set. The chip-side constraints
* (each > sf, distinct, spread <= 4, BW>=500 caps the count) are
* enforced in the driver, so an accepted set is a valid one. */
char tmp[32];
const char* parts[EXTRA_SF_MAX + 1];
uint8_t sfs[EXTRA_SF_MAX] = {0};
StrHelper::strncpy(tmp, &config[9], sizeof(tmp));
int num = mesh::Utils::parseTextParts(tmp, parts, EXTRA_SF_MAX + 1, ' ');
if (num == 1 && (strcmp(parts[0], "0") == 0 || strcmp(parts[0], "off") == 0)) {
num = 0;
}
if (num > EXTRA_SF_MAX) {
sprintf(reply, "Error: at most %d extra SFs", EXTRA_SF_MAX);
} else {
for (int i = 0; i < num; i++) sfs[i] = (uint8_t)atoi(parts[i]);
if (_callbacks->configSideDetectors(sfs, (uint8_t)num)) {
memset(_prefs->extra_sf, 0, sizeof(_prefs->extra_sf));
for (int i = 0; i < num; i++) _prefs->extra_sf[i] = sfs[i];
savePrefs();
strcpy(reply, num ? "OK - extra SFs set" : "OK - extra SFs cleared");
} else {
strcpy(reply, "Error: unsupported or invalid extra SF config");
}
}
} else if (memcmp(config, "multi.acks ", 11) == 0) {
int val = atoi(&config[11]);
if (val == 0 || val == 1) {