dandri/ZephCore
1
0
Fork 0
mirror of https://github.com/liquidraver/ZephCore.git synced 2026-10-16 06:50:05 +00:00
Code Issues Packages Projects Releases Wiki Activity

server roles, event loops, companion transports, storage and prefs.json

Browse Source 
Server roles (slice 7)
- CommonCLI split into upstream's shape; region CLI moved into CommonCLI;
  ClientACL, RegionMap, TransportKeyStore and both server meshes in
  upstream shape over an Arduino compat shim (helpers/compat: Arduino.h,
  Stream/Print, Serial, SHA256, FILESYSTEM/File over Zephyr fs)
- room server processAck port; `get acl` prints as upstream
- room: default name Room-XXXX, display/input rotation, live radio UI refresh

Event loops (slice 7b)
- repeater and room server share server_main_common with a ServerRole
  descriptor; shared event bits in src/mesh_events.h
- room server deadline-driven (idle wakes 2.2/s -> 0.08/s); companion
  loop() runs on housekeeping (closes the lazy contact-flush gap)
- `get loop.wakes` in debug builds (CONFIG_ZEPHCORE_LOOP_WAKE_STATS)

Companion transports and WiFi (slice 8)
- upstream MultiSerialInterface: BLE, USB/UART and TCP are each a
  BaseSerialInterface, every connected transport gets every frame;
  CompanionSerial holds a lossless reply; shared frame_txq for BLE/TCP
- SerialCompanionTransport and LinuxTCPTransport replaced by
  TcpCompanionTransport; ZephyrBLE split (gatt layout, DFU)
- WiFi companion (upstream wifi.ssid/pwd/enabled CLI, TCP port 5000) on
  boards declaring `capabilities: wifi` in zephcore.yml: the PSRAM
  ESP32-S3 boards, plus Heltec V3 (140 contacts), Wireless Tracker (130)
  and both C6 boards (280); ESP32-S3 without PSRAM gets bounded WiFi
  buffers and a measured 72 KB heap; PSRAM boards' internal heap 72 KB
- TCP queues: own depth (ZEPHCORE_TCP_QUEUE_SIZE=8), RX waits instead
  of dropping
- RAM: companion ClientACL dropped; main/BT-TX/TCP stacks sized from
  measured peaks (-7 KB nRF companions, -9 KB ESP32 companions)
- ESP32 WiFi stopped working under ~200 frames/s unicast. Fixed by:
  patches/zephyr/0017 never block the WiFi task in the RX callback;
  patches/zephyr/0018 lock shared_multi_heap (heap corruption with the
  WiFi heap in PSRAM); patches/modules/hal_espressif/0001 backport of
  hal_espressif af97fb02df (PSRAM realloc)

Storage and prefs (slice 9)
- prefs are now prefs.json through upstream's ConfigSerializer (ported
  verbatim), with upstream's key names for shared fields and ZephCore's
  own under "zc"; on first boot the binary new_prefs / repeater prefs is
  migrated and kept, so a downgrade still boots with the old settings
- helpers/PrefsCodec: both legacy binary layouts (companion 272 B,
  server 311 B) as Zephyr-free codecs; sanitizeNodePrefs is the only
  validator
- fix: server prefs could be replaced by a truncated file when a write
  failed; identity, prefs and channel writes go through one checked
  atomic replace (ZephyrFsUtil)
- fix: a corrupt cad_auto byte turned adaptive CAD off instead of the
  default on
- fix: a deliberate 300 s GPS duty on a repeater was rewritten to 48 h
  on every boot (that migration now runs on legacy files only)
- one identity loader for all roles (IdentityFile); an unusable key
  file is always parked as .bad before regenerating
- server store no longer stamps repeater defaults on room server and
  observer; companion first-boot volume policy moved into the store
  (adoptVolume)
- ZephyrDataStore 1435 -> ~850 lines
This commit is contained in:
liquidraver
2026-09-25 08:34:21 +02:00
parent b361c33901
commit 38f815a0a1
114 changed files with 11280 additions and 10308 deletions
Download Patch File Download Diff File Expand all files Collapse all files
zephcore/src/main_room_server.cpp
+16 -717
View File
@@ -1,735 +1,34 @@
/*
* SPDX-License-Identifier: MIT
* ZephCore - Room Server (USB CLI, Event-Driven)
* ZephCore - Room Server
*
* This is the main entry point for the room server (shared BBS) role.
* Room servers use USB serial CLI for configuration (no BLE).
* The room server (shared BBS) role's entry point: its mesh object, and the
* ServerRole that hands it to the shared server code (server_main_common.cpp).
*/
#include <stdio.h>
#include <string.h>
#include <zephyr/kernel.h>
#include <zephyr/sys/util.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(zephcore_room_main, CONFIG_ZEPHCORE_MAIN_LOG_LEVEL);
#include <zephyr/device.h>
#include <zephyr/devicetree.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/uart.h>
#include <zephyr/sys/ring_buffer.h>
#include <zephyr/drivers/hwinfo.h>
#include <zephyr/sys/reboot.h>
#include "oled_power.h"
#include "boot_prefs.h"
/* BLE controller assert handler — BT is compiled even for repeater (via zephcore_common.conf) */
#if IS_ENABLED(CONFIG_BT_CTLR_ASSERT_HANDLER)
extern "C" void bt_ctlr_assert_handle(char *file, uint32_t line)
{
LOG_ERR("!!! BLE CONTROLLER ASSERT: %s:%u !!!", file ? file : "?", line);
k_sleep(K_MSEC(100));
sys_reboot(SYS_REBOOT_COLD);
}
#endif
/* USB CDC ACM init + 1200-baud DFU + DTR callbacks (shared with companion).
*
* Gate on the CDC-ACM class driver, NOT on DT_HAS_COMPAT_STATUS_OKAY alone: a
* board overlay may expose a cdc_acm_uart DT node unconditionally (the shared
* esp32s3_usb_otg.dtsi does), so the node can be present while the class driver
* — and therefore zephcore_usbd_* and the device object — is not compiled
* (e.g. an ESP32-S3 build without esp32s3_usb.conf). This mirrors the CMake
* condition that compiles ZephyrUSBCDC.cpp. */
#define ZEPHCORE_USB_STACK \
(IS_ENABLED(CONFIG_USB_CDC_ACM) || IS_ENABLED(CONFIG_USBD_CDC_ACM_CLASS))
#if ZEPHCORE_USB_STACK && !IS_ENABLED(CONFIG_CDC_ACM_SERIAL_INITIALIZE_AT_BOOT)
#include <ZephyrUSBCDC.h>
#endif
#include <app/RepeaterDataStore.h>
#include "../adapters/datastore/ZephyrFsFormat.h"
#include "server_main_common.h"
#include <app/RoomServerMesh.h>
#include <adapters/clock/ZephyrRTCClock.h>
#include <adapters/clock/ZephyrRTCDiscover.h>
#include <ZephyrSensorManager.h>
/* UI subsystem (display, buttons, buzzer) */
#include "ui_task.h"
/* Radio + mesh includes (shared header selects LR1110 or SX126x) */
#include <src/RadioIncludes.h>
#if IS_ENABLED(CONFIG_ZEPHCORE_WIFI_OTA)
#include "wifi_ota.h"
#endif
/* LED configuration */
#if DT_NODE_HAS_PROP(DT_ALIAS(led0), gpios)
#define LED0_NODE DT_ALIAS(led0)
static const struct gpio_dt_spec led0 = GPIO_DT_SPEC_GET(LED0_NODE, gpios);
#endif
#if DT_NODE_HAS_PROP(DT_ALIAS(led1), gpios)
#define LED1_NODE DT_ALIAS(led1)
static const struct gpio_dt_spec led1 = GPIO_DT_SPEC_GET(LED1_NODE, gpios);
#endif
/* USB CLI configuration */
#define USB_RING_BUF_SIZE 512
#define CLI_LINE_BUF_SIZE 256
/*
* Event-driven mesh loop - replaces 50ms polling with true event signaling.
* Events are signaled from ISR/callbacks, mesh loop wakes immediately.
*/
#define MESH_EVENT_LORA_RX BIT(0) /* LoRa packet received */
#define MESH_EVENT_LORA_TX_DONE BIT(1) /* LoRa TX complete */
#define MESH_EVENT_CLI_RX BIT(2) /* CLI command received */
#define MESH_EVENT_HOUSEKEEPING BIT(3) /* Periodic housekeeping (noise floor, etc.) */
#define MESH_EVENT_GPS_ACTION BIT(4) /* GPS state change (must run on main thread!) */
#define MESH_EVENT_TX_DRAIN BIT(5) /* Outbound packet delay expired, run checkSend */
#define MESH_EVENT_PUSH_TICK BIT(6) /* Room server: drive the post-sync push engine */
#define MESH_EVENT_RTC_SAVE BIT(7) /* Hardware-RTC write requested off-main */
#define MESH_EVENT_INIT_ADVERT BIT(8) /* Deferred boot advert — send on main thread */
#define MESH_EVENT_ALL (MESH_EVENT_LORA_RX | MESH_EVENT_LORA_TX_DONE | MESH_EVENT_CLI_RX | MESH_EVENT_HOUSEKEEPING | MESH_EVENT_GPS_ACTION | MESH_EVENT_TX_DRAIN | MESH_EVENT_PUSH_TICK | MESH_EVENT_RTC_SAVE | MESH_EVENT_INIT_ADVERT)
/* Housekeeping interval - infrequent to preserve power savings */
#define HOUSEKEEPING_INTERVAL_MS CONFIG_ZEPHCORE_HOUSEKEEPING_INTERVAL_MS
/* Event object for mesh loop */
static struct k_event mesh_events;
/* Pending epoch for a deferred zephcore_rtc_save() — gps_fix_callback runs on
* the GNSS modem_chat worker thread, where the RTC's blocking I2C transactions
* would stall NMEA ingest. Stash the latest epoch and let the main thread
* perform the write; concurrent posts coalesce into one save. */
static atomic_t pending_rtc_epoch = ATOMIC_INIT(0);
static void request_rtc_save(uint32_t epoch)
{
atomic_set(&pending_rtc_epoch, (atomic_val_t)epoch);
k_event_post(&mesh_events, MESH_EVENT_RTC_SAVE);
}
/* USB CDC state */
static const struct device *usb_dev;
static uint8_t usb_ring_buf_data[USB_RING_BUF_SIZE];
static struct ring_buf usb_ring_buf;
static char cli_line_buf[CLI_LINE_BUF_SIZE];
static char cli_reply_buf[256];
static uint16_t cli_line_idx;
/* Last byte seen by cli_rx_work_fn, for collapsing CRLF/LFCR pairs. Persists
* across work-item invocations, so a pair split across two USB packets still
* compares correctly. */
static uint8_t cli_prev_byte;
/* Completed CLI lines are handed to the MAIN thread for execution. Byte
* assembly + echo (cli_rx_work_fn) runs on sysworkq and touches no mesh
* state, but handleCommand() mutates the lock-free packet pool / dispatcher
* that loop() also touches — running it on sysworkq races the main loop.
* So we queue the finished line and let the event loop run handleCommand(). */
struct cli_cmd_line { char buf[CLI_LINE_BUF_SIZE]; };
K_MSGQ_DEFINE(cli_cmd_queue, sizeof(struct cli_cmd_line), 4, 4);
/* Work items for event-driven processing */
static void cli_rx_work_fn(struct k_work *work);
static void housekeeping_timer_fn(struct k_timer *timer);
static void tx_drain_work_fn(struct k_work *work);
static void initial_advert_work_fn(struct k_work *work);
K_WORK_DEFINE(cli_rx_work, cli_rx_work_fn);
K_WORK_DELAYABLE_DEFINE(tx_drain_work, tx_drain_work_fn);
K_WORK_DELAYABLE_DEFINE(initial_advert_work, initial_advert_work_fn);
/* Housekeeping timer for periodic tasks (noise floor calibration, etc.) */
K_TIMER_DEFINE(housekeeping_timer, housekeeping_timer_fn, NULL);
/* Room server push timer — wakes loop() at PUSH_TICK_INTERVAL_MS so the
* post-sync push engine advances at its intended ~1.2 s cadence instead of
* the 5 s housekeeping tick. Keeps post delivery snappy and TX smooth under
* load (without running radio maintenance that often). */
#define PUSH_TICK_INTERVAL_MS 500
static void push_timer_fn(struct k_timer *timer)
{
ARG_UNUSED(timer);
k_event_post(&mesh_events, MESH_EVENT_PUSH_TICK);
}
K_TIMER_DEFINE(push_timer, push_timer_fn, NULL);
/* Forward declarations */
#ifdef ZEPHCORE_LORA
static RoomServerMesh *room_mesh_ptr;
#endif
/* Print string to USB serial */
static void cli_print(const char *str)
{
if (!usb_dev) return;
while (*str) {
uart_poll_out(usb_dev, *str++);
}
}
/* USB CDC UART interrupt callback */
static void cli_uart_isr(const struct device *dev, void *user_data)
{
ARG_UNUSED(user_data);
for (;;) {
uart_irq_update(dev);
if (uart_irq_is_pending(dev) <= 0) {
break;
}
if (uart_irq_rx_ready(dev)) {
uint8_t buf[64];
int recv_len = uart_fifo_read(dev, buf, sizeof(buf));
if (recv_len > 0) {
ring_buf_put(&usb_ring_buf, buf, recv_len);
k_work_submit(&cli_rx_work);
}
}
}
}
/* CLI RX work - processes line-based CLI commands
* Matches Arduino behavior: echo each char, then " -> reply" on enter
*/
static void cli_rx_work_fn(struct k_work *work)
{
ARG_UNUSED(work);
uint8_t byte;
while (ring_buf_get(&usb_ring_buf, &byte, 1) == 1) {
const uint8_t prev = cli_prev_byte;
cli_prev_byte = byte;
/* Process command on \r OR \n. Accepting both is what makes a piped
* `echo "cmd" > /dev/ttyACM0` (LF only) work. The cost is that a CRLF
* terminal sends two terminator bytes per Enter, so collapse the pair
* here: skip a terminator that directly follows a *different* one.
* "\r\r" and "\n\n" (two genuine blank lines) still dispatch twice.
* Blank lines ARE dispatched -- `region load` commits on one, and
* handleCommand() no-ops a blank line otherwise. The previous
* de-duplicator keyed on an empty line buffer instead: it ate every
* blank line (stranding `region load` until a reboot) and still let
* the CRLF tail fall through and emit a stray newline of its own. */
if (byte == '\r' || byte == '\n') {
if ((prev == '\r' || prev == '\n') && byte != prev) {
continue; /* tail of a CRLF/LFCR pair */
}
cli_line_buf[cli_line_idx] = '\0';
/* Debug: log received command */
if (cli_line_idx > 0) {
LOG_INF("CLI cmd len=%d: %.40s%s", cli_line_idx,
cli_line_buf, cli_line_idx > 40 ? "..." : "");
}
/* Hand the command to the main thread (see cli_cmd_queue).
* The reply + trailing newline are emitted there, exactly
* matching the previous inline output order. */
struct cli_cmd_line c;
strncpy(c.buf, cli_line_buf, sizeof(c.buf) - 1);
c.buf[sizeof(c.buf) - 1] = '\0';
if (k_msgq_put(&cli_cmd_queue, &c, K_NO_WAIT) == 0) {
k_event_post(&mesh_events, MESH_EVENT_CLI_RX);
} else {
cli_print("\r\n -> busy\r\n");
}
cli_line_idx = 0;
} else if (byte == 0x7F || byte == 0x08) {
/* Backspace - echo backspace sequence */
if (cli_line_idx > 0) {
cli_line_idx--;
if (usb_dev) {
uart_poll_out(usb_dev, '\b');
uart_poll_out(usb_dev, ' ');
uart_poll_out(usb_dev, '\b');
}
}
} else if (cli_line_idx < sizeof(cli_line_buf) - 1) {
/* Echo character back (like Arduino) */
if (usb_dev) {
uart_poll_out(usb_dev, byte);
}
cli_line_buf[cli_line_idx++] = (char)byte;
}
}
}
#ifdef ZEPHCORE_LORA
/* Run queued CLI commands on the MAIN thread (see cli_cmd_queue). Output
* order matches the old inline path exactly: "\r\n -> reply" when there is
* a reply, then a trailing "\r\n". */
static void process_cli_commands(void)
{
struct cli_cmd_line c;
while (room_mesh_ptr && k_msgq_get(&cli_cmd_queue, &c, K_NO_WAIT) == 0) {
cli_reply_buf[0] = '\0';
room_mesh_ptr->handleCommand(0, c.buf, cli_reply_buf);
if (cli_reply_buf[0] != '\0') {
cli_print("\r\n -> ");
cli_print(cli_reply_buf);
}
cli_print("\r\n");
}
}
#endif
/* Housekeeping timer callback - signals event to wake mesh loop periodically */
static void housekeeping_timer_fn(struct k_timer *timer)
{
ARG_UNUSED(timer);
k_event_post(&mesh_events, MESH_EVENT_HOUSEKEEPING);
}
#ifdef ZEPHCORE_LORA
/* LoRa RX callback - called from ISR context when packet received */
static void lora_rx_callback(void *user_data)
{
ARG_UNUSED(user_data);
k_event_post(&mesh_events, MESH_EVENT_LORA_RX);
}
/* LoRa TX complete callback */
static void lora_tx_done_callback(void *user_data)
{
ARG_UNUSED(user_data);
k_event_post(&mesh_events, MESH_EVENT_LORA_TX_DONE);
}
/* TX drain — Dispatcher queued a packet with a delay.
* Schedule a precise wake so checkSend runs when the delay expires. */
static void tx_drain_work_fn(struct k_work *work)
{
ARG_UNUSED(work);
k_event_post(&mesh_events, MESH_EVENT_TX_DRAIN);
}
/* Deferred initial advertisement — gives GPS time to get a fix at boot.
* Runs on sysworkq (the 10 s delay timer), so it must NOT send the advert
* here: sendSelfAdvertisement() mutates the packet pool / dispatcher shared
* with loop(). Post an event and let the main thread send it. */
static void initial_advert_work_fn(struct k_work *work)
{
ARG_UNUSED(work);
k_event_post(&mesh_events, MESH_EVENT_INIT_ADVERT);
}
static void tx_queued_callback(uint32_t delay_ms, void *user_data)
{
ARG_UNUSED(user_data);
k_work_reschedule(&tx_drain_work, K_MSEC(delay_ms));
}
#endif
/* Global instances */
static mesh::ZephyrRTCClock rtc_clock;
/* GPS event callback - called when GPS work handlers need the main thread
* to process a state transition (wake from standby, fix done, timeout).
* Runs from system work queue context — just posts an event, no blocking. */
static void gps_event_callback(void)
{
k_event_post(&mesh_events, MESH_EVENT_GPS_ACTION);
}
static RepeaterDataStore data_store;
/* GPS fix callback - syncs RTC from GPS time.
* Repeaters do NOT update prefs lat/lon from GPS — prefs coordinates are the
* user's manually-set position used for adverts. Precise GPS position is
* served only via telemetry requests (gps_get_last_known_position). */
static void gps_fix_callback(double lat, double lon, int64_t utc_time)
{
if (utc_time > 0) {
LOG_INF("GPS fix: RTC sync time=%lld", utc_time);
rtc_clock.setCurrentTime((uint32_t)utc_time);
/* Defer the hardware-RTC write to the main thread — blocking I2C
* here would stall NMEA ingest (gps_fix_callback runs in the
* GNSS modem_chat worker context). */
request_rtc_save((uint32_t)utc_time);
}
int lat_deg = (int)lat;
int lon_deg = (int)lon;
int lat_frac = (int)((lat - lat_deg) * 1000000);
int lon_frac = (int)((lon - lon_deg) * 1000000);
if (lat_frac < 0) lat_frac = -lat_frac;
if (lon_frac < 0) lon_frac = -lon_frac;
LOG_INF("GPS fix: lat=%d.%06d lon=%d.%06d (telemetry only)",
lat_deg, lat_frac, lon_deg, lon_frac);
}
#ifdef ZEPHCORE_LORA
static mesh::ZephyrBoard zephyr_board;
static uint16_t get_battery_mv(void)
{
return zephyr_board.getBattMilliVolts();
}
/* Radio is constructed with no prefs pointer; main() binds it to
* room_mesh._prefs via setPrefs() before room_mesh.begin(). */
static const struct device *const lora_dev = DEVICE_DT_GET(DT_ALIAS(lora0));
static mesh::LoRaRadio lora_radio(lora_dev, zephyr_board);
static mesh::ZephyrMillisecondClock ms_clock;
static mesh::ZephyrRNG zephyr_rng;
static SimpleMeshTables mesh_tables;
/* RoomServerMesh requires: board, radio, ms_clock, rng, rtc, tables */
static RoomServerMesh room_mesh(zephyr_board, lora_radio, ms_clock, zephyr_rng, rtc_clock, mesh_tables);
#endif
/* Strong override of the weak stub in ui_mesh_actions_stubs.c: keep the prefs
* copy in step when the LEDs page toggles, so "get leds" reports what the node
* is actually doing. RAM only — there is no deferred-save path off the UI
* thread, so a UI toggle lasts until reboot; "set leds" is what persists. */
extern "C" void mesh_set_leds_disabled(bool disabled)
{
if (room_mesh_ptr) {
room_mesh_ptr->getNodePrefs()->leds_disabled = disabled ? 1 : 0;
}
}
/* Repeater event loop */
static void room_event_loop(void)
{
LOG_INF("starting event-driven loop");
/* Print startup banner (no prompt - Arduino style) */
cli_print("\r\n=== ZephCore Room Server ===\r\n");
/* Start housekeeping timer for periodic maintenance tasks */
k_timer_start(&housekeeping_timer, K_MSEC(HOUSEKEEPING_INTERVAL_MS),
K_MSEC(HOUSEKEEPING_INTERVAL_MS));
/* Start the room-server push timer (drives post sync between clients). */
k_timer_start(&push_timer, K_MSEC(PUSH_TICK_INTERVAL_MS),
K_MSEC(PUSH_TICK_INTERVAL_MS));
for (;;) {
/* Wait for any mesh event - blocks until signaled */
uint32_t events = k_event_wait(&mesh_events, MESH_EVENT_ALL, false, K_FOREVER);
k_event_clear(&mesh_events, events);
/* GPS state transitions must run on main thread (GNSS driver
* modem_chat blocks on system work queue semaphore). */
if (events & MESH_EVENT_GPS_ACTION) {
gps_process_event();
}
static const ServerRole room_role = {
.name = "Room Server",
.name_prefix = "Room",
#ifdef ZEPHCORE_LORA
/* Run queued CLI commands here (main thread) BEFORE loop() drains
* any outbound packets they enqueued — keeps all mesh-state
* mutation on the main thread (see cli_cmd_queue). */
if (events & MESH_EVENT_CLI_RX) {
process_cli_commands();
}
/* Deferred boot advert — sent on the main thread (see
* initial_advert_work_fn); loop() below drains the queued packet. */
if (room_mesh_ptr && (events & MESH_EVENT_INIT_ADVERT)) {
LOG_INF("Sending deferred initial advertisement");
room_mesh_ptr->sendSelfAdvertisement(500, false);
}
/* Packet processing — only on radio/CLI/TX events */
if (room_mesh_ptr &&
(events & (MESH_EVENT_LORA_RX | MESH_EVENT_LORA_TX_DONE |
MESH_EVENT_CLI_RX | MESH_EVENT_TX_DRAIN |
MESH_EVENT_PUSH_TICK))) {
room_mesh_ptr->loop();
}
.mesh = &room_mesh,
.callbacks = &room_mesh,
.prefs = room_mesh.getNodePrefs(),
.begin = [](RepeaterDataStore *store) { room_mesh.begin(store); },
.loop = [] { room_mesh.loop(); },
.handle_command = [](char *command, char *reply) { room_mesh.handleCommand(0, command, reply); },
.note_gps_time_sync = [] { room_mesh.noteGPSTimeSync(); },
#endif
/* Periodic housekeeping — maintenance + display refresh */
if (events & MESH_EVENT_HOUSEKEEPING) {
#ifdef ZEPHCORE_LORA
/* Radio maintenance: noise floor calibration, adaptive-CAD
* probe, RX watchdog. Separated from loop() so these
* never run on packet-driven events. */
if (room_mesh_ptr) {
room_mesh_ptr->maintenanceLoop();
/* Also drive loop() so time-based actions (advert
* timers, tempradio set/revert, contacts flush,
* uplink status) still fire when no LoRa/CLI
* traffic wakes the event loop. */
room_mesh_ptr->loop();
}
#endif
ui_set_clock(rtc_clock.getCurrentTime());
#ifdef ZEPHCORE_LORA
/* Refresh radio params (noise floor changes from calibration) */
if (room_mesh_ptr) {
NodePrefs *p = room_mesh_ptr->getNodePrefs();
ui_set_radio_params(
(uint32_t)(p->freq * 1000000.0f + 0.5f),
p->sf,
(uint16_t)(p->bw * 10.0f + 0.5f),
p->cr,
p->tx_power_dbm,
lora_radio.getNoiseFloor());
}
/* Battery is now refreshed lazily from ui_pages_render() with
* a 30 s freshness guard — no periodic ADC fire here. */
#endif
}
/* Off-main RTC write request (gps_fix_callback runs in modem_chat
* context — see request_rtc_save()). Perform the blocking I2C
* write here on the main thread instead. */
if (events & MESH_EVENT_RTC_SAVE) {
zephcore_rtc_save((uint32_t)atomic_get(&pending_rtc_epoch));
#ifdef ZEPHCORE_LORA
/* GPS just set the clock — arm the mesh time-sync drift envelope. */
if (room_mesh_ptr) {
room_mesh_ptr->noteGPSTimeSync();
}
#endif
}
}
}
};
int main(void)
{
#ifdef ZEPHCORE_LORA
/* Clear any stale bootloader magic from previous sessions.
* Prevents nRF52 boards from re-entering bootloader after reboot. */
zephyr_board.clearBootloaderMagic();
#endif
/* USB CDC init up front so the host can enumerate, then wait for the
* host to open the port (DTR asserted) — event-driven via the usbd
* message callback. Unplugged → 2 s timeout, no banner; attached →
* banner reaches the user the moment the port opens. */
#if ZEPHCORE_USB_STACK && DT_HAS_COMPAT_STATUS_OKAY(zephyr_cdc_acm_uart) && \
!IS_ENABLED(CONFIG_CDC_ACM_SERIAL_INITIALIZE_AT_BOOT) && \
(IS_ENABLED(CONFIG_USB_CDC_ACM) || IS_ENABLED(CONFIG_USBD_CDC_ACM_CLASS))
zephcore_usbd_init();
zephcore_usbd_wait_dtr(2000);
#endif
LOG_INF("=== ZephCore Room Server starting ===");
#if IS_ENABLED(CONFIG_ZEPHCORE_WIFI_OTA)
/* Confirm MCUboot image early — if we just booted after OTA,
* this marks the image as good so MCUboot keeps it. */
wifi_ota_confirm_image();
#endif
/* Configure LEDs */
#if DT_NODE_HAS_PROP(DT_ALIAS(led0), gpios)
if (gpio_is_ready_dt(&led0)) {
gpio_pin_configure_dt(&led0, GPIO_OUTPUT_INACTIVE);
}
#endif
#if DT_NODE_HAS_PROP(DT_ALIAS(led1), gpios)
if (gpio_is_ready_dt(&led1)) {
gpio_pin_configure_dt(&led1, GPIO_OUTPUT_INACTIVE);
}
#endif
/* First boot on a volume that is not this role's - a fresh chip, a
* companion, or a node that was running Arduino MeshCore, whose nRF52
* filesystems overlap our lfs_partition
* (devdocs/HANDOVER_lfs_arduino_overlap.md). Erase everything so we
* start from a known state: Zephyr's automount only
* auto-formats the LittleFS volume when it fails to mount, and never
* touches storage_partition (BLE bonds NVS) or QSPI.
*
* Self-limiting, so it needs no "done" marker: the identity is generated
* and saved a few lines below, and loadPrefs() persists defaults on the
* same boot, so the next boot sees this role's data and skips this. */
if (!data_store.hasRoleData()) {
LOG_WRN("Volume holds no data for this role - formatting before first boot");
if (!zephcore_fs_format_all(nullptr)) {
LOG_ERR("First-boot format failed - /lfs is not mounted");
}
}
/* Initialize repeater data store */
if (!data_store.begin()) {
LOG_ERR("RepeaterDataStore init failed");
}
/* Initialize sensor manager */
sensor_manager_init();
/* Restore wall-clock time from a battery-backed hardware RTC if present
* (shown tagged "L" until the next GPS/CLI sync; no-op if no RTC). */
{
uint32_t rtc_epoch;
if (zephcore_rtc_restore(&rtc_epoch)) {
rtc_clock.setCurrentTime(rtc_epoch);
}
}
/* GPS callbacks only. Duty interval and repeater mode are applied by
* apply_boot_prefs() after loadPrefs() below. */
if (gps_is_available()) {
gps_set_fix_callback(gps_fix_callback);
gps_set_event_callback(gps_event_callback);
}
/* Initialize UI (display + buttons). Shows splash screen, then auto-
* transitions to STATUS page. Display sleeps after auto-off timeout;
* user button is the only wake source for repeater. */
ui_init();
#if !IS_ENABLED(CONFIG_ZEPHCORE_UI_DISPLAY)
oled_sleep();
#endif
/* Log environment sensor availability */
if (env_sensors_available()) {
LOG_INF("Environment sensors available");
}
#ifdef ZEPHCORE_LORA
room_mesh_ptr = &room_mesh;
/* Initialize mesh event object BEFORE begin() — radio callbacks post events */
k_event_init(&mesh_events);
/* Set LoRa callbacks for event-driven packet processing */
lora_radio.setRxCallback(lora_rx_callback, nullptr);
lora_radio.setTxDoneCallback(lora_tx_done_callback, nullptr);
room_mesh.setTxQueuedCallback(tx_queued_callback, nullptr);
/* Load or generate identity BEFORE begin(). First-boot keygen runs
* the layered entropy mixer + Ed25519 derive + reserved-prefix
* guard inside ZephyrRNG::generateFirstBootIdentity. */
mesh::LocalIdentity self_identity;
if (!data_store.loadIdentity(self_identity)) {
LOG_INF("No identity found, generating new keypair...");
mesh::ZephyrRNG::generateFirstBootIdentity(self_identity);
data_store.saveIdentity(self_identity);
LOG_INF("New identity saved");
}
room_mesh.self_id = self_identity;
/* Log repeater ID (first 8 bytes of public key) */
LOG_INF("Room ID: %02x%02x%02x%02x%02x%02x%02x%02x...",
self_identity.pub_key[0], self_identity.pub_key[1],
self_identity.pub_key[2], self_identity.pub_key[3],
self_identity.pub_key[4], self_identity.pub_key[5],
self_identity.pub_key[6], self_identity.pub_key[7]);
/* Load persisted prefs and bind the radio to _prefs BEFORE begin() — the
* radio reads freq/bw/sf/cr through this pointer during Mesh::begin() →
* Dispatcher::begin() → Radio::begin(). Without this, the radio would
* configure on NodePrefs defaults (869.618 MHz) regardless of saved
* settings: CLI readback looked correct but the hardware stayed on EU.
* Every role binds this way; begin() refuses to start without it. */
data_store.loadPrefs(*room_mesh.getNodePrefs());
lora_radio.setPrefs(room_mesh.getNodePrefs());
/* LED gate and GPS duty from prefs. After loadPrefs() and ui_init(),
* before begin() -- see boot_prefs.h. */
apply_boot_prefs(room_mesh.getNodePrefs(), true);
/* Start mesh with data store - loads ACL, regions */
room_mesh.begin(&data_store);
/* Generate default node name from hardware device ID if not set */
NodePrefs* prefs = room_mesh.getNodePrefs();
if (strlen(prefs->node_name) == 0 || strcmp(prefs->node_name, "Room") == 0) {
uint8_t dev_id[8];
ssize_t id_len = hwinfo_get_device_id(dev_id, sizeof(dev_id));
if (id_len >= 4) {
snprintf(prefs->node_name, sizeof(prefs->node_name),
"Room-%02X%02X%02X%02X", dev_id[0], dev_id[1], dev_id[2], dev_id[3]);
}
}
/* Apply RX boost and duty cycle from prefs */
lora_radio.setRxBoost(prefs->rx_boost != 0);
lora_radio.setFemRxEnable(prefs->fem_rxgain != 0);
lora_radio.enableRxDutyCycle(prefs->rx_duty_cycle != 0);
lora_radio.setCadParams(prefs->cad_auto != 0, prefs->cad_offset,
prefs->probe_interval, prefs->cad_busycap,
prefs->cad_base);
/* Write back the (offset, base) actually in force. setCadParams() may
* have re-anchored the offset across a base-table change, and the pair
* has to be persisted for the NEXT upgrade to have an anchor of its own.
* Guarded so a node whose base has not moved never writes flash at boot. */
if (prefs->cad_base != lora_radio.cadBasePeak() ||
prefs->cad_offset != lora_radio.getCadOffset()) {
prefs->cad_offset = lora_radio.getCadOffset();
prefs->cad_base = lora_radio.cadBasePeak();
room_mesh.savePrefs();
}
/* LR2021 side detectors (multi-SF RX) from prefs. extra_sf is a
* zero-terminated list; a rejected set (SF/BW changed since it was
* saved) just leaves the feature off, and non-LR2021 radios report it
* unsupported. */
{
uint8_t n = 0;
while (n < EXTRA_SF_MAX && prefs->extra_sf[n] != 0) n++;
if (n > 0 && !lora_radio.configSideDetectors(prefs->extra_sf, n)) {
LOG_WRN("extra.sf %u SFs rejected for current SF/BW — side detectors off", n);
}
}
/* Feed initial UI state from loaded prefs */
ui_set_node_name(prefs->node_name);
ui_set_radio_params(
(uint32_t)(prefs->freq * 1000000.0f + 0.5f), /* MHz → Hz */
prefs->sf,
(uint16_t)(prefs->bw * 10.0f + 0.5f), /* kHz → 0.1 kHz */
prefs->cr,
prefs->tx_power_dbm,
lora_radio.getNoiseFloor());
ui_set_battery_provider(get_battery_mv);
ui_set_battery(zephyr_board.getBattMilliVolts(), 0);
ui_set_gps_available(gps_is_available());
/* Defer initial advertisement by 10s — gives GPS time for a quick fix.
* Advert payload (including coords) is built when the work fires. */
LOG_INF("Initial advertisement scheduled in 10s");
k_work_schedule(&initial_advert_work, K_SECONDS(10));
#endif
/* USB CDC was initialized earlier (right after clearBootloaderMagic).
* Just acquire the device handle for the CLI's UART IRQ binding below. */
#if ZEPHCORE_USB_STACK && DT_HAS_COMPAT_STATUS_OKAY(zephyr_cdc_acm_uart)
usb_dev = DEVICE_DT_GET_ONE(zephyr_cdc_acm_uart);
#else
/* No CDC ACM class driver (e.g. ESP32 usb_serial, or an ESP32-S3 build
* without esp32s3_usb.conf where the cdc_acm DT node exists but the class
* isn't compiled) — use the chosen console UART. */
usb_dev = DEVICE_DT_GET(DT_CHOSEN(zephyr_console));
#endif
if (device_is_ready(usb_dev)) {
LOG_INF("USB CDC device ready: %s", usb_dev->name);
ring_buf_init(&usb_ring_buf, sizeof(usb_ring_buf_data), usb_ring_buf_data);
/* Set up UART interrupt callback */
uart_irq_callback_set(usb_dev, cli_uart_isr);
uart_irq_rx_enable(usb_dev);
} else {
LOG_ERR("USB CDC device not ready");
usb_dev = NULL;
}
/*
* Event-driven architecture: main thread runs repeater event loop.
* No BLE - all configuration via USB serial CLI.
*/
#ifdef ZEPHCORE_LORA
room_event_loop(); /* Never returns */
#else
for (;;) {
k_sleep(K_FOREVER);
}
#endif
return 0;
return server_main(room_role);
}