leds.brightness (PWM-capable boards) was RAM-only since it was added: it
always reset to ZEPHCORE_LED_DEFAULT_BRIGHTNESS_PCT (10%) on every boot,
regardless of what a user had last set it to.
New field led_brightness on NodePrefs, following the exact same
append-only pattern as leds_radio_mode/leds_hb_mode added just before it:
offset 311 in RepeaterDataStore.cpp (repeater/room-server/observer,
shared file), offset 174 in ZephyrDataStore.cpp (companion). Both are
backward compatible by construction: a prefs file written before this
field existed simply leaves it at the initNodePrefs() default (10%),
which is exactly the behaviour every already-deployed node has today --
no special-casing needed to keep "10% on a new/not-yet-upgraded node" as
the effective default.
CommonCLI.cpp's "set leds.brightness" handler now writes the prefs field
and calls savePrefs(), same as the leds.radio/leds.hb handlers right
above it; "get leds.brightness" now reads from prefs instead of the RAM
getter directly, for the same reason those two already do (always in
sync, prefs is the source of truth). The four boot call sites
(main_companion.cpp, main_repeater.cpp, main_room_server.cpp,
main_observer.cpp) each gained a zephcore_led_set_brightness_pct() call
seeding the RAM cache from the persisted value, mirroring the existing
leds_radio_mode/leds_hb_mode lines right next to them.
Verified building for heltec_t096/nrf52840 (companion) and rak3401_1watt
(repeater), the two roles/datastores touched by this change.
- gps: servers honour gps_enabled at boot (was lost on reboot; zc.gps_set
upgrades older prefs to on once); sleep lock only while acquiring;
gps off works on boards without a power line (UART sleep); UI toggles
and fixes handled on the main thread; configure only after a good init;
observer parks its GPS; one interval clamp (clampGpsInterval); one
nav-mode knob (room servers on Air530Z now stationary); GNSS UARTE from DT
- gps: split into ZephyrGPSManager / gps_power / gps_module_cfg
(+gps_internal.h); dead driver branches, gps_get_diag, sats_* removed
- clock: ZephyrRTCClock writes the hardware RTC itself (clkreboot now
resets it); MESH_EVENT_RTC_SAVE gone
- power: one power-off path (zephcore_power_off, ZephyrBoard::powerOff),
poweroff/shutdown CLI, get pwrmgt.*, crash record kept across reboot,
battery reading cached 10 s, fuel gauge on the current API
- telemetry: upstream SensorManager + CayenneLPP (rounded to nearest),
one builder for all roles; per-sensor channels, MCU temp always,
guest gating and inverse mask on servers; sensor list/get/set work;
BME280/BMP280 also probed at 0x77
- CLI: gps in upstream's form, get gps detail, gps sync
ZephCore T096