- src/Mesh.cpp Reverted #ifdef ZEPHCORE_COMPANION block → back to vanilla self_id.copyHashTo
- helpers/ContactInfo.h Removed OUT_PATH_SENT
- helpers/ui-joystick/joystick_defs.h Added OUT_PATH_SENT here (with comment clarifying it's UI-only)
- helpers/ui-joystick/joystick_ui_task.h Removed dead _next_batt_refresh field
- helpers/ui-joystick/joystick_ui_task.cpp Removed _next_batt_refresh(0) from ctor init list
- helpers/ui-joystick/joystick_screens.h MsgEntry::origin[80]→[32]; MAX_UNREAD_MSGS 32→16
- Kconfig DOOM help text now lists both UI activation paths
- ARCHITECTURE.md Same correction in §8.5
Stop doing UI work nobody asked for. The 5 s housekeeping tick was
reading env sensors (I2C, 10-50 ms), the battery ADC (regulator
toggle + 8 samples, every 60 s), and re-rendering the display
unconditionally — all while the display might be off and nothing
on-air had requested any of it.
Now:
- render_sensors() reads env sensors only when the user is on
that page (event-driven, never fires during idle)
- battery refresh is lazy on ui_pages_render() with a 30 s
freshness guard; explicit ui_set_battery() calls also count
- the unconditional OLED rerender from housekeeping is gone;
real state changes (messages, BLE, button press) still fire
schedule_render() directly
Telemetry / stats paths read fresh ADC + sensors on demand and
were never using the UI cache, so over-the-air consumers are
unaffected.
Both mesh::Packet::writePath and ::copyPath did a raw memcpy of the
decoded hash_count*hash_size bytes from src to dest with no bound on
src. Two call sites used phone-supplied or LoRa-anon-supplied buffers
where the path_len byte was attacker-controlled:
- CompanionMesh CMD_SEND_CHANNEL_DATA accepted len>=4 and called
writePath with no src bound; a paired phone could leak up to ~65
bytes of syswq stack into the outgoing LoRa channel-data frame.
- RepeaterMesh handleAnonRegionsReq / handleAnonOwnerReq /
handleAnonClockReq read reply_path_len from an unauthenticated
LoRa anon-request payload and called copyPath without any src
bound. Any LoRa neighbor could leak repeater stack into the
reply path.
Hardened the API: both functions now require an explicit src_len
and reject (return 0) when the decoded byte count exceeds it.
Updated all 14 call sites across Packet/Mesh/Dispatcher/BaseChatMesh/
CompanionMesh/RepeaterMesh. Trusted callers (internal MAX_PATH_SIZE
buffers) pass MAX_PATH_SIZE; untrusted callers pass real remaining
length. Added len-5 plumbing through the anon-handler signatures.
CMD_SEND_CHANNEL_DATA also gained a local len>=5 + path_bytes
sanity check for early rejection.
Add .gitattributes rules so .c/.h/.cpp/.hpp are always stored as LF
(prevents EOL drift from editors with autocrlf-true defaults), and
renormalize the 30 source files that had drifted to CRLF in the index.
Pure mechanical change — `git diff --ignore-cr-at-eol` is empty.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
stolen from Zephyr main:
1. Issue StopTimerOnPreamble=1 before SetRxDutyCycle so the chip's
timer is not reset on every preamble detect (per §13.1 of the
datasheet). Without this, duty cycle effectively never sleeps in
noisy RF and current draw spikes.
2. On IRQ_RX_TX_TIMEOUT during duty-cycle RX, re-arm via
sx126x_restart_rx() instead of falling through to set_sleep().
The old path silently killed duty cycle after the first preamble
false-positive.
3. On recv_duty_cycle(NULL) cancel, wake the radio before issuing
SetStandby — BUSY stays asserted during the sleep phase and the
standby command was being dropped.
Also adds a dc_timeout_restarts atomic counter incremented on the Fix 2
path, exposed end-to-end: sx126x_ext.h accessors → LoRaRadioBase vtable
→ SX126xRadio override → CommonCLICallbacks → RepeaterMesh. Query via
`get dc.restarts` on the repeater CLI; cleared by `clear stats`. High
values indicate a noisy environment or a too-loose preamble threshold.
(+increase ESP BT stack because future zephyr pin advance will trip that mine)
- buzzer was bugged when message received
- green led: hearthbeat, blue led: message received indicator (when not connected to app)
- if only one led blinks: hearthbeat 20msec, message received 200msec
- RegionMap::findMatch(): fix 1-byte stack overflow in tmp[] with bounded memcpy
- Packet::readFrom(): add bounds checks before reading transport codes
- Mesh::sendFlood(): release packet on TRACE type and invalid hash_size early returns
- CompanionMesh: add cleanupSignState() called from BLE disconnect to free sign buffer
- ZephyrCompanionUSB: add 2s timeout for partial V3 frames to prevent parser stall
- ui_mesh_actions: replace volatile bool with Zephyr atomic_t for cross-thread state
- CommonCLI: wrap ~40 fs_read() calls in prefs_read() helper with truncation warning
liquidraver