Add a board-aware battery SOC system replacing the two independent
linear approximations that existed in the UI helpers.
New helpers/battery_curve.{h,c}: a 21-point (5% step) OCV lookup table
with integer linear interpolation. The default generic LiPo curve is a
weak symbol — any board can override it by dropping a battery_curve.c
into its board directory. CMakeLists.txt selects the board-specific file
when present, falling back to the generic.
Board.h gains getBattPercent() (default 0); ZephyrBoard implements it
via battery_curve_lookup().
Board-specific curves added for boards with measured cell data:
t1000_e, rak_wismesh_tag, thinknode_m6, sensecap_solar, wio_tracker_l1.
ADC multiplier corrections applied across all nRF52840 boards:
- Boards using a correctly-derived 3600×ratio formula get +0.5% to
compensate for nRF SAADC gain error (7200→7236, 6300→6332, etc.)
- rak_wismesh_tag, rak3401_1watt, gat562_30s had multipliers copied
from Arduino's 3.0V AREF formula; corrected to 3600×1.73×1.005=6259
- xiao_nrf52840 (10911) left unchanged — empirically calibrated value
above the theoretical, assumed already correct for that hardware
get adc.multiplier now reports current mV reading and the board's
curve 100% target, making field calibration self-guiding.
Channel replies from the Unread screen passed index -1, which
sendComposedMessage can't route, so they silently failed to send. Look
up the real channel slot by name and bail if it can't be resolved.
553b71c made production the default but broke configure+link:
- ZEPHCORE_COMPANION_USB sat inside the role choice (recursive dep)
- CONFIG_RESET_ON_FATAL_ERROR was an undefined, unimplemented symbol
- USB companion sources still gated on CONFIG_LOG, not ZEPHCORE_USB_STACK
Move the USB toggle out of the choice, add a real
ZEPHCORE_RESET_ON_FATAL_ERROR Kconfig + k_sys_fatal_error_handler that
cold-reboots, and match the CMake USB guard to ZEPHCORE_USB_STACK.
liquidraver