- compile Semtech lr11xx_driver v2.7.0 from modules/lib/lora-basics-modem
(driver layer only) instead of the vendored fork; HAL moves next to the
driver (+abort_blocking_cmd); driver no longer builds app-tree sources
- split lr11xx_dio1_work_handler into per-IRQ helpers (CCN 46 -> 12)
- zc_lora_timing.h: preamble grace, payload deadline, 24-bit saturation,
shared with sx126x (patch 0003) and host-tested; sx126x CAD_RX Rx bound
now saturates instead of wrapping (SF12/BW7.81)
- semtech,lr1110 binding includes upstream lr11xx-base; boards use
upstream property names (irq-gpios, tcxo-voltage, rfsw-*)
- drop dead lr11xx_get_random/get_chip_temp_c; correct the IRQ-clear
invariant wording; comment diet (image-identical)
- boards/**/zephcore.yml: one manifest per board/preset (release roles,
variants, catalog metadata, capabilities); scripts/board_manifest.py
validates and serves them to build.sh, gen_provider_catalog.py and
docs/supported_boards.md
- cmake/zephcore_board.cmake: board dir -> platform, shared by app and
sysbuild; removes the board-name regex lists and 7 separate globs
- conf chain: exact-name role/debug classification checked against
Kconfig, idempotent across non-pristine reconfigures, version string
single-sourced (BT DIS rev generated), day-granular build epoch
- Doom easter egg: Kconfig default for the wio_tracker_l1 companion
instead of a build.sh-only flag
- catalog: maker for the LR2021 EVK (KeyError before); CI installs PyYAML
- user -DEXTRA_DTC_OVERLAY_FILE overlays now take precedence over derived overlays
Verified: identical .config, DTS and source lists for 97 board/role
configs; identical images for 4 reference builds; identical build.sh
command/artifact set and catalog content.
Add a board-aware battery SOC system replacing the two independent
linear approximations that existed in the UI helpers.
New helpers/battery_curve.{h,c}: a 21-point (5% step) OCV lookup table
with integer linear interpolation. The default generic LiPo curve is a
weak symbol — any board can override it by dropping a battery_curve.c
into its board directory. CMakeLists.txt selects the board-specific file
when present, falling back to the generic.
Board.h gains getBattPercent() (default 0); ZephyrBoard implements it
via battery_curve_lookup().
Board-specific curves added for boards with measured cell data:
t1000_e, rak_wismesh_tag, thinknode_m6, sensecap_solar, wio_tracker_l1.
ADC multiplier corrections applied across all nRF52840 boards:
- Boards using a correctly-derived 3600×ratio formula get +0.5% to
compensate for nRF SAADC gain error (7200→7236, 6300→6332, etc.)
- rak_wismesh_tag, rak3401_1watt, gat562_30s had multipliers copied
from Arduino's 3.0V AREF formula; corrected to 3600×1.73×1.005=6259
- xiao_nrf52840 (10911) left unchanged — empirically calibrated value
above the theoretical, assumed already correct for that hardware
get adc.multiplier now reports current mV reading and the board's
curve 100% target, making field calibration self-guiding.
liquidraver