Single LED (P0.28) doubles as heartbeat, message flash, shutdown flash
and LoRa TX indicator, all sharing the same physical pin. Adds one PWM
channel on that pin (heartbeat-pwm-led/lora-tx-pwm-led aliases) and a
single 0-100 brightness knob (get/set led) covering every one of those
events at once, deliberately RAM-only: resets to a 10% default on every
reboot regardless of CLI changes made in a previous session. The
existing persisted on/off gate (set leds on|off) is untouched.
Boards without heartbeat-pwm-led/lora-tx-pwm-led aliases keep their
current plain-GPIO behavior unchanged.
- admin screen: telemetry via upstream LPPDataHelpers (ported; fixed its
1-byte humidity size), every field, per-channel, signed current
(helpers/ui/telemetry_text)
- battery %: both UIs show ZephyrBoard::getBattPercent() (discharge
curve / fuel gauge) instead of a linear 3.0-4.2 V estimate
- app/PowerPolicy: low-battery auto-shutdown + v-contact alert +
autoshutdown CLI on every companion (headless too); under 2000 mV
counts as no battery; default 3200 mV, stored 3300 migrated once
- one time_sync.c for both UIs; ui_push_radio_state() for all roles
- repeater admin screen in its own file; handleInput split per mode
- dead UI code removed; companion help fits one reply frame
- gps: servers honour gps_enabled at boot (was lost on reboot; zc.gps_set
upgrades older prefs to on once); sleep lock only while acquiring;
gps off works on boards without a power line (UART sleep); UI toggles
and fixes handled on the main thread; configure only after a good init;
observer parks its GPS; one interval clamp (clampGpsInterval); one
nav-mode knob (room servers on Air530Z now stationary); GNSS UARTE from DT
- gps: split into ZephyrGPSManager / gps_power / gps_module_cfg
(+gps_internal.h); dead driver branches, gps_get_diag, sats_* removed
- clock: ZephyrRTCClock writes the hardware RTC itself (clkreboot now
resets it); MESH_EVENT_RTC_SAVE gone
- power: one power-off path (zephcore_power_off, ZephyrBoard::powerOff),
poweroff/shutdown CLI, get pwrmgt.*, crash record kept across reboot,
battery reading cached 10 s, fuel gauge on the current API
- telemetry: upstream SensorManager + CayenneLPP (rounded to nearest),
one builder for all roles; per-sensor channels, MCU temp always,
guest gating and inverse mask on servers; sensor list/get/set work;
BME280/BMP280 also probed at 0x77
- CLI: gps in upstream's form, get gps detail, gps sync
Move the 128×13 zephcore_logo bitmap from ui-button/ui_pages.c into
the shared ui_common.c (linkage extern), with the dimensions and
declaration in display.h. Both UI splash renders now share the same
data — no duplicated array.
Joystick SplashScreen::render() now draws the wordmark at the top,
"MeshCore on Zephyr" beneath it, and the build date below — matching
the button-UI layout. Replaces the earlier text-only "MeshCore /
<version> / <date>" placeholder.
- Lock overlay: show battery % + unread count between title and unlock
sequence; ui_invalidate_battery_cache() on screen wake forces a fresh
ADC sample so the user sees current data immediately
- UnreadScreen::addPreview gains initially_read; received msgs pass
_ble_connected (don't count unread when phone is syncing); sent msgs
pass true (you sent it, you know it)
- CompanionMesh::queueLocalSent{Contact,Channel}Message + PUSH_CODE_MSG_WAITING
on wio-originated sends so a connected phone app sees them via the
normal offline-queue flow (path_len = OUT_PATH_SENT marker)
- OUT_PATH_SENT moved back from joystick_defs.h to ContactInfo.h
(now a wire-format value, not UI-only)
ZephCore T096