- admin screen: telemetry via upstream LPPDataHelpers (ported; fixed its
1-byte humidity size), every field, per-channel, signed current
(helpers/ui/telemetry_text)
- battery %: both UIs show ZephyrBoard::getBattPercent() (discharge
curve / fuel gauge) instead of a linear 3.0-4.2 V estimate
- app/PowerPolicy: low-battery auto-shutdown + v-contact alert +
autoshutdown CLI on every companion (headless too); under 2000 mV
counts as no battery; default 3200 mV, stored 3300 migrated once
- one time_sync.c for both UIs; ui_push_radio_state() for all roles
- repeater admin screen in its own file; handleInput split per mode
- dead UI code removed; companion help fits one reply frame
- gps: servers honour gps_enabled at boot (was lost on reboot; zc.gps_set
upgrades older prefs to on once); sleep lock only while acquiring;
gps off works on boards without a power line (UART sleep); UI toggles
and fixes handled on the main thread; configure only after a good init;
observer parks its GPS; one interval clamp (clampGpsInterval); one
nav-mode knob (room servers on Air530Z now stationary); GNSS UARTE from DT
- gps: split into ZephyrGPSManager / gps_power / gps_module_cfg
(+gps_internal.h); dead driver branches, gps_get_diag, sats_* removed
- clock: ZephyrRTCClock writes the hardware RTC itself (clkreboot now
resets it); MESH_EVENT_RTC_SAVE gone
- power: one power-off path (zephcore_power_off, ZephyrBoard::powerOff),
poweroff/shutdown CLI, get pwrmgt.*, crash record kept across reboot,
battery reading cached 10 s, fuel gauge on the current API
- telemetry: upstream SensorManager + CayenneLPP (rounded to nearest),
one builder for all roles; per-sensor channels, MCU temp always,
guest gating and inverse mask on servers; sensor list/get/set work;
BME280/BMP280 also probed at 0x77
- CLI: gps in upstream's form, get gps detail, gps sync
- Lock overlay: show battery % + unread count between title and unlock
sequence; ui_invalidate_battery_cache() on screen wake forces a fresh
ADC sample so the user sees current data immediately
- UnreadScreen::addPreview gains initially_read; received msgs pass
_ble_connected (don't count unread when phone is syncing); sent msgs
pass true (you sent it, you know it)
- CompanionMesh::queueLocalSent{Contact,Channel}Message + PUSH_CODE_MSG_WAITING
on wio-originated sends so a connected phone app sees them via the
normal offline-queue flow (path_len = OUT_PATH_SENT marker)
- OUT_PATH_SENT moved back from joystick_defs.h to ContactInfo.h
(now a wire-format value, not UI-only)
Stop doing UI work nobody asked for. The 5 s housekeeping tick was
reading env sensors (I2C, 10-50 ms), the battery ADC (regulator
toggle + 8 samples, every 60 s), and re-rendering the display
unconditionally — all while the display might be off and nothing
on-air had requested any of it.
Now:
- render_sensors() reads env sensors only when the user is on
that page (event-driven, never fires during idle)
- battery refresh is lazy on ui_pages_render() with a 30 s
freshness guard; explicit ui_set_battery() calls also count
- the unconditional OLED rerender from housekeeping is gone;
real state changes (messages, BLE, button press) still fire
schedule_render() directly
Telemetry / stats paths read fresh ADC + sensors on demand and
were never using the UI cache, so over-the-air consumers are
unaffected.
liquidraver