- gps: servers honour gps_enabled at boot (was lost on reboot; zc.gps_set
upgrades older prefs to on once); sleep lock only while acquiring;
gps off works on boards without a power line (UART sleep); UI toggles
and fixes handled on the main thread; configure only after a good init;
observer parks its GPS; one interval clamp (clampGpsInterval); one
nav-mode knob (room servers on Air530Z now stationary); GNSS UARTE from DT
- gps: split into ZephyrGPSManager / gps_power / gps_module_cfg
(+gps_internal.h); dead driver branches, gps_get_diag, sats_* removed
- clock: ZephyrRTCClock writes the hardware RTC itself (clkreboot now
resets it); MESH_EVENT_RTC_SAVE gone
- power: one power-off path (zephcore_power_off, ZephyrBoard::powerOff),
poweroff/shutdown CLI, get pwrmgt.*, crash record kept across reboot,
battery reading cached 10 s, fuel gauge on the current API
- telemetry: upstream SensorManager + CayenneLPP (rounded to nearest),
one builder for all roles; per-sensor channels, MCU temp always,
guest gating and inverse mask on servers; sensor list/get/set work;
BME280/BMP280 also probed at 0x77
- CLI: gps in upstream's form, get gps detail, gps sync
Server roles (slice 7)
- CommonCLI split into upstream's shape; region CLI moved into CommonCLI;
ClientACL, RegionMap, TransportKeyStore and both server meshes in
upstream shape over an Arduino compat shim (helpers/compat: Arduino.h,
Stream/Print, Serial, SHA256, FILESYSTEM/File over Zephyr fs)
- room server processAck port; `get acl` prints as upstream
- room: default name Room-XXXX, display/input rotation, live radio UI refresh
Event loops (slice 7b)
- repeater and room server share server_main_common with a ServerRole
descriptor; shared event bits in src/mesh_events.h
- room server deadline-driven (idle wakes 2.2/s -> 0.08/s); companion
loop() runs on housekeeping (closes the lazy contact-flush gap)
- `get loop.wakes` in debug builds (CONFIG_ZEPHCORE_LOOP_WAKE_STATS)
Companion transports and WiFi (slice 8)
- upstream MultiSerialInterface: BLE, USB/UART and TCP are each a
BaseSerialInterface, every connected transport gets every frame;
CompanionSerial holds a lossless reply; shared frame_txq for BLE/TCP
- SerialCompanionTransport and LinuxTCPTransport replaced by
TcpCompanionTransport; ZephyrBLE split (gatt layout, DFU)
- WiFi companion (upstream wifi.ssid/pwd/enabled CLI, TCP port 5000) on
boards declaring `capabilities: wifi` in zephcore.yml: the PSRAM
ESP32-S3 boards, plus Heltec V3 (140 contacts), Wireless Tracker (130)
and both C6 boards (280); ESP32-S3 without PSRAM gets bounded WiFi
buffers and a measured 72 KB heap; PSRAM boards' internal heap 72 KB
- TCP queues: own depth (ZEPHCORE_TCP_QUEUE_SIZE=8), RX waits instead
of dropping
- RAM: companion ClientACL dropped; main/BT-TX/TCP stacks sized from
measured peaks (-7 KB nRF companions, -9 KB ESP32 companions)
- ESP32 WiFi stopped working under ~200 frames/s unicast. Fixed by:
patches/zephyr/0017 never block the WiFi task in the RX callback;
patches/zephyr/0018 lock shared_multi_heap (heap corruption with the
WiFi heap in PSRAM); patches/modules/hal_espressif/0001 backport of
hal_espressif af97fb02df (PSRAM realloc)
Storage and prefs (slice 9)
- prefs are now prefs.json through upstream's ConfigSerializer (ported
verbatim), with upstream's key names for shared fields and ZephCore's
own under "zc"; on first boot the binary new_prefs / repeater prefs is
migrated and kept, so a downgrade still boots with the old settings
- helpers/PrefsCodec: both legacy binary layouts (companion 272 B,
server 311 B) as Zephyr-free codecs; sanitizeNodePrefs is the only
validator
- fix: server prefs could be replaced by a truncated file when a write
failed; identity, prefs and channel writes go through one checked
atomic replace (ZephyrFsUtil)
- fix: a corrupt cad_auto byte turned adaptive CAD off instead of the
default on
- fix: a deliberate 300 s GPS duty on a repeater was rewritten to 48 h
on every boot (that migration now runs on legacy files only)
- one identity loader for all roles (IdentityFile); an unusable key
file is always parked as .bad before regenerating
- server store no longer stamps repeater defaults on room server and
observer; companion first-boot volume policy moved into the store
(adoptVolume)
- ZephyrDataStore 1435 -> ~850 lines
A room server is an endpoint, not a repeater. Strip the repeater
machinery the role inherited from the RepeaterMesh clone:
- allowPacketForward() returns false unconditionally — never relays
transit traffic. (Upstream's simple_room_server gates this on
disable_fwd; hard-off here since the role should never repeat.)
- neighbour tracking: NeighbourInfo/neighbours[], putNeighbour,
onAdvertRecv, removeNeighbor; formatNeighborsReply -> "not supported"
- node discovery: onControlDataRecv, sendNodeDiscoverReq, the
discover.neighbors CLI, discover rate-limiter + pending state
- loop detection: isLooped + max_loop_* tables + loop_detect pref
- dead code: RepeaterStats struct, GET_NEIGHBOURS handler, simple_sort
-344 lines net. Builds clean (FLASH 30.7% / RAM 32.2%); login, post,
push/sync, read-only guest and admin remote-management all
hardware-verified on the GAT562 kit.
The room server's onAnonDataRecv handles login inline (the room login
protocol carries a sync_since cursor the repeater's doesn't), so the
cloned repeater helpers handleLoginReq + handleAnonRegionsReq /
handleAnonOwnerReq / handleAnonClockReq — and the anon_limiter they used
— were dead after the port. Remove them (~160 lines). No behavior change.
The inherited neighbor-tracking / node-discovery machinery is also unused
on a room server; left in place for now (can be trimmed in a follow-up).
Add the MeshCore Room Server role to ZephCore — a store-and-forward
shared message room. Clients log in with an admin or guest password
and post messages; the server pushes each new post to all other
logged-in clients (round-robin, per-client sync cursor, ACK + retry,
3-strike eviction).
Ported from upstream MeshCore's simple_room_server, structured as a
near-clone of RepeaterMesh so it reuses the proven ACL, region
filtering, CLI, adverts and telemetry; the post buffer + push engine
are the only net-new pieces:
- RoomServerMesh: PostInfo ring (MAX_UNSYNCED_POSTS=32), addPost,
pushPostToClient, getUnsyncedCount, processAck, onAckRecv, the
loop() push driver; room login (onAnonDataRecv parses the
sync_since cursor); posts/admin-CLI/keep-alive (onPeerDataRecv);
ADV_TYPE_ROOM advert; ServerStats wire layout; disable_fwd=1.
- main_room_server.cpp: event-loop entry (USB serial CLI, no BLE).
- Kconfig: ZEPHCORE_ROLE_ROOM_SERVER + ZEPHCORE_MAX_UNSYNCED_POSTS.
- CMakeLists role gating; boards/common/room_server.conf.
Post frame, SHA-256 ACK and login-reply layouts match upstream for
MeshCore app compatibility. Builds for gat562_30s
(FLASH 30.95% / RAM 32.46%). Not yet hardware-tested.
liquidraver