# Repeater-specific config
#
# Build with: -DEXTRA_CONF_FILE="boards/common/repeater.conf"
#
# Repeaters use USB serial CLI for configuration — no BLE, no bonding, no NUS.
# This overrides the BLE settings in zephcore_common.conf.

# ========== Role Selection ==========
CONFIG_ZEPHCORE_ROLE_REPEATER=y

# ========== Disable BLE entirely ==========
# Repeaters have zero BLE functionality — all config via USB serial CLI.
# Saves ~100KB flash and ~30KB RAM on nRF52.
CONFIG_BT=n

# ========== Entropy (required when BT is disabled) ==========
# BT normally pulls in the entropy subsystem. Without BT, we need it explicitly
# for Ed25519 key generation, LoRa random delays, etc.
CONFIG_ENTROPY_GENERATOR=y

# ========== Optional ESP32 repeater uplink ==========
# Observer-style WiFi+MQTT reporting from repeater role.
# Runtime-configured and reboot-applied.
CONFIG_ZEPHCORE_REPEATER_UPLINK=n

# GNSS dynamic model: stationary on fixed roles, from CONFIG_ZEPHCORE_GPS_NAV_MODE
# (which the air530z driver's own knob follows; see zephcore/Kconfig).