# RAK6421 WisBlock Pi HAT + RAK13300/RAK13302 (SX1262), IO Slot 1.
#
# Named after the HAT, not a Pi model — the wiring is identical on every Pi
# that exposes the 40-pin header on gpiochip0 (Raspberry Pi 2 / 3 / 4 / Zero 2).
# Raspberry Pi 5 moved the header to gpiochip4 — use rak6421_pi5.conf for it
# (or pass --lora-gpio-chip=/dev/gpiochip4 at runtime).
#
# IO Slot 1 wiring (BCM GPIO numbers on gpiochip0):
#   SPI:        /dev/spidev0.0 (CE0 = GPIO 8, hardware CS)
#   DIO1/IRQ:   GPIO 22 (IO6)
#   RESET:      GPIO 16 (IO4)
#   BUSY:       GPIO 24 (IO5)
#   DIO2 = RF switch, DIO3 = 1.8V TCXO, Enable_Pins 12+13 held high (GPIO hogs).

CONFIG_ZEPHCORE_BOARD_NAME="RAK6421"

# Drive the RAK6421 Enable_Pins (GPIO 12/13) high at boot via the GPIO hogs
# declared in rak6421.overlay.
CONFIG_GPIO_HOGS=y