mirror of
https://github.com/liquidraver/ZephCore.git
synced 2026-10-15 12:19:55 +00:00
ZephCore T096
0a15194eaa
heltec_wifi_lora32_v43_procpu.dts already declared a pwm-leds node for its single onboard LED (pwm_led_white, LEDC0/GPIO35, generic pwm-led0 alias) -- it just never had the two project-specific aliases (heartbeat-pwm-led / lora-tx-pwm-led) that helpers/ui/ui_common.c and adapters/board/ZephyrBoard.cpp actually look for. T096 and Wireless Tracker V2 have had this wired for a while; V4.3 was simply never included in that earlier rollout, not blocked by anything in its hardware -- the PWM path was sitting there unused this whole time, confirmed by grepping for any other consumer of pwm-led0/pwm_led_white before touching it (none). Aliased both roles to the same node, same as T096/WT2: this board has only one physical LED, shared between heartbeat and LoRa TX activity. ZEPHCORE_LED_PIN_SHARED and the RX-pulse/pin-hold arbitration (extended to PWM boards earlier today, commit a57d4c7) apply automatically since both aliases point at the same node. Gives V4.3 the full leds.radio/leds.hb/leds.brightness set for the first time: leds.radio previously had no effect at all on this board (no activity LED aliased whatsoever), leds.brightness was accepted but inert (no PWM-capable LED reachable). Verified building for heltec_wifi_lora32_v43/esp32s3 with boards/common/esp32s3_pwm_led.conf (same flag already used for WT2).