mirror of
https://github.com/liquidraver/ZephCore.git
synced 2026-10-15 11:50:03 +00:00
ZephCore T096
2eb8a8e5b7
Single LED (P0.28) doubles as heartbeat, message flash, shutdown flash and LoRa TX indicator, all sharing the same physical pin. Adds one PWM channel on that pin (heartbeat-pwm-led/lora-tx-pwm-led aliases) and a single 0-100 brightness knob (get/set led) covering every one of those events at once, deliberately RAM-only: resets to a 10% default on every reboot regardless of CLI changes made in a previous session. The existing persisted on/off gate (set leds on|off) is untouched. Boards without heartbeat-pwm-led/lora-tx-pwm-led aliases keep their current plain-GPIO behavior unchanged.
95 lines
2.5 KiB
C
95 lines
2.5 KiB
C
/*
|
|
* ZephCore - LED master gate
|
|
* Copyright (c) 2025 ZephCore
|
|
* SPDX-License-Identifier: MIT
|
|
*/
|
|
|
|
#include "led_gate.h"
|
|
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/sys/atomic.h>
|
|
|
|
/* Atomic because the readers are not all on one thread: the heartbeat work
|
|
* handler runs on the system work queue, while the TX LED is driven from the
|
|
* dispatcher's transmit path. Writers are the main thread (boot / CLI) and the
|
|
* UI task. */
|
|
static atomic_t s_leds_disabled;
|
|
|
|
/*
|
|
* Weak: overridden by helpers/ui/ui_common.c in builds that have a UI, so a
|
|
* change made from the CLI also extinguishes a lit heartbeat LED immediately
|
|
* and syncs the UI's LED page. No-op in headless builds, where ui_common.c
|
|
* isn't compiled at all — which is exactly why the gate lives here and not
|
|
* there.
|
|
*/
|
|
__weak void zephcore_leds_ui_sync(bool disabled) { ARG_UNUSED(disabled); }
|
|
|
|
bool zephcore_leds_disabled(void)
|
|
{
|
|
return atomic_get(&s_leds_disabled) != 0;
|
|
}
|
|
|
|
void zephcore_leds_set_disabled(bool disabled)
|
|
{
|
|
atomic_set(&s_leds_disabled, disabled ? 1 : 0);
|
|
zephcore_leds_ui_sync(disabled);
|
|
}
|
|
|
|
/*
|
|
* Both modes default to 0, which every LEDS_* enum defines as the behaviour the
|
|
* firmware had before these settings existed. That matters beyond tidiness: a
|
|
* role whose boot path forgets to apply the pref, or a build with no CLI at
|
|
* all, still lands on the historical behaviour rather than something new.
|
|
*/
|
|
static atomic_t s_radio_mode; /* LEDS_RADIO_TX */
|
|
static atomic_t s_hb_mode; /* LEDS_HB_ALL */
|
|
static atomic_t s_radio_holds_pin;
|
|
|
|
uint8_t zephcore_leds_radio_mode(void)
|
|
{
|
|
return (uint8_t)atomic_get(&s_radio_mode);
|
|
}
|
|
|
|
void zephcore_leds_set_radio_mode(uint8_t mode)
|
|
{
|
|
atomic_set(&s_radio_mode, mode);
|
|
}
|
|
|
|
uint8_t zephcore_leds_hb_mode(void)
|
|
{
|
|
return (uint8_t)atomic_get(&s_hb_mode);
|
|
}
|
|
|
|
void zephcore_leds_set_hb_mode(uint8_t mode)
|
|
{
|
|
atomic_set(&s_hb_mode, mode);
|
|
}
|
|
|
|
bool zephcore_led_radio_holds_pin(void)
|
|
{
|
|
return atomic_get(&s_radio_holds_pin) != 0;
|
|
}
|
|
|
|
void zephcore_led_radio_hold_pin(bool held)
|
|
{
|
|
atomic_set(&s_radio_holds_pin, held ? 1 : 0);
|
|
}
|
|
|
|
/* Same cross-thread readers/writers as the gate above (heartbeat work queue,
|
|
* TX path, CLI) — atomic for the same reason. RAM-only on purpose: no
|
|
* savePrefs() call anywhere near this, see led_gate.h. */
|
|
static atomic_t s_led_brightness_pct = ATOMIC_INIT(ZEPHCORE_LED_DEFAULT_BRIGHTNESS_PCT);
|
|
|
|
uint8_t zephcore_led_brightness_pct(void)
|
|
{
|
|
return (uint8_t)atomic_get(&s_led_brightness_pct);
|
|
}
|
|
|
|
void zephcore_led_set_brightness_pct(uint8_t pct)
|
|
{
|
|
if (pct > 100) {
|
|
pct = 100;
|
|
}
|
|
atomic_set(&s_led_brightness_pct, pct);
|
|
}
|