ZephCore

mirror of https://github.com/liquidraver/ZephCore.git synced 2026-09-11 09:26:12 +00:00

Files

T

rlwilliamson-dev 58dbba7f3b room-server: drive push engine on a timer + cut delivery latency

Two hardware-found fixes after on-air testing on the GAT562 kit:

- Add a 500ms push timer in main_room_server.cpp so the post-sync
  engine advances at its intended cadence. ZephCore is event-driven
  (no Arduino superloop), so without this the engine only ran on the
  5s housekeeping tick — posts dripped out every ~5s and transmits
  bunched up, causing timeouts/resends.

- Lower the post-sync hold from upstream's conservative defaults
  (POST_SYNC_DELAY 6s -> 2s, PUSH_NOTIFY 2000ms -> 1000ms). These are
  server-side timing only (no wire-format change), and take measured
  delivery from ~6-7s down to ~2s.

Verified on hardware (910.525/62.5/SF7/CR8, two clients): normal-pace
messages deliver in ~2s with clean ACKs. Rapid-fire bursts can still
drop out-of-order messages via the per-client timestamp replay check
(unchanged from upstream) — left as-is to stay upstream-compatible.

2026-06-02 14:12:08 -05:00

CompanionMesh.cpp

refactor(crypto): replace orlp/ed25519 with Monocypher 4.0.2

2026-05-31 22:07:43 +02:00

CompanionMesh.h

simplify app layer: dedup response/telemetry/JSON builders

2026-05-29 12:54:52 +02:00

main_observer.cpp

joystick UI:

2026-05-22 11:38:51 +02:00

observer_creds.cpp

patch file CLRF fixup and repeater-observer hybrid first implementation