mirror of
https://github.com/liquidraver/ZephCore.git
synced 2026-10-15 16:49:54 +00:00
liquidraver
38f815a0a1
Server roles (slice 7) - CommonCLI split into upstream's shape; region CLI moved into CommonCLI; ClientACL, RegionMap, TransportKeyStore and both server meshes in upstream shape over an Arduino compat shim (helpers/compat: Arduino.h, Stream/Print, Serial, SHA256, FILESYSTEM/File over Zephyr fs) - room server processAck port; `get acl` prints as upstream - room: default name Room-XXXX, display/input rotation, live radio UI refresh Event loops (slice 7b) - repeater and room server share server_main_common with a ServerRole descriptor; shared event bits in src/mesh_events.h - room server deadline-driven (idle wakes 2.2/s -> 0.08/s); companion loop() runs on housekeeping (closes the lazy contact-flush gap) - `get loop.wakes` in debug builds (CONFIG_ZEPHCORE_LOOP_WAKE_STATS) Companion transports and WiFi (slice 8) - upstream MultiSerialInterface: BLE, USB/UART and TCP are each a BaseSerialInterface, every connected transport gets every frame; CompanionSerial holds a lossless reply; shared frame_txq for BLE/TCP - SerialCompanionTransport and LinuxTCPTransport replaced by TcpCompanionTransport; ZephyrBLE split (gatt layout, DFU) - WiFi companion (upstream wifi.ssid/pwd/enabled CLI, TCP port 5000) on boards declaring `capabilities: wifi` in zephcore.yml: the PSRAM ESP32-S3 boards, plus Heltec V3 (140 contacts), Wireless Tracker (130) and both C6 boards (280); ESP32-S3 without PSRAM gets bounded WiFi buffers and a measured 72 KB heap; PSRAM boards' internal heap 72 KB - TCP queues: own depth (ZEPHCORE_TCP_QUEUE_SIZE=8), RX waits instead of dropping - RAM: companion ClientACL dropped; main/BT-TX/TCP stacks sized from measured peaks (-7 KB nRF companions, -9 KB ESP32 companions) - ESP32 WiFi stopped working under ~200 frames/s unicast. Fixed by: patches/zephyr/0017 never block the WiFi task in the RX callback; patches/zephyr/0018 lock shared_multi_heap (heap corruption with the WiFi heap in PSRAM); patches/modules/hal_espressif/0001 backport of hal_espressif af97fb02df (PSRAM realloc) Storage and prefs (slice 9) - prefs are now prefs.json through upstream's ConfigSerializer (ported verbatim), with upstream's key names for shared fields and ZephCore's own under "zc"; on first boot the binary new_prefs / repeater prefs is migrated and kept, so a downgrade still boots with the old settings - helpers/PrefsCodec: both legacy binary layouts (companion 272 B, server 311 B) as Zephyr-free codecs; sanitizeNodePrefs is the only validator - fix: server prefs could be replaced by a truncated file when a write failed; identity, prefs and channel writes go through one checked atomic replace (ZephyrFsUtil) - fix: a corrupt cad_auto byte turned adaptive CAD off instead of the default on - fix: a deliberate 300 s GPS duty on a repeater was rewritten to 48 h on every boot (that migration now runs on legacy files only) - one identity loader for all roles (IdentityFile); an unusable key file is always parked as .bad before regenerating - server store no longer stamps repeater defaults on room server and observer; companion first-boot volume policy moved into the store (adoptVolume) - ZephyrDataStore 1435 -> ~850 lines
65 lines
2.2 KiB
C++
65 lines
2.2 KiB
C++
/*
|
|
* SPDX-License-Identifier: MIT
|
|
* RepeaterDataStore - Filesystem storage for repeater
|
|
*
|
|
* Uses /lfs/repeater/ prefix to keep data separate from companion, so the
|
|
* two prefs layouts (311 B here, 272 B there, different field order; see
|
|
* helpers/PrefsCodec.h) can never be read through each other.
|
|
*
|
|
* The roles are NOT interchangeable: booting a repeater onto a companion
|
|
* volume formats it, and vice versa. They are different kinds of node, and
|
|
* they share one 128 KB LittleFS volume - a companion's contacts and blob
|
|
* cache would crowd out repeater writes (-ENOSPC), not corrupt them. Save
|
|
* your identity before switching roles.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <cstdint>
|
|
#include <stddef.h>
|
|
#include <mesh/Identity.h>
|
|
#include <helpers/NodePrefs.h>
|
|
#include <helpers/ClientACL.h>
|
|
#include <helpers/RegionMap.h>
|
|
|
|
class RepeaterDataStore {
|
|
public:
|
|
RepeaterDataStore();
|
|
|
|
/* Initialize filesystem and repeater directory */
|
|
bool begin();
|
|
|
|
/* Identity management */
|
|
bool loadIdentity(mesh::LocalIdentity& id);
|
|
bool saveIdentity(const mesh::LocalIdentity& id);
|
|
|
|
/* Prefs management */
|
|
bool loadPrefs(NodePrefs& prefs);
|
|
bool savePrefs(const NodePrefs& prefs);
|
|
|
|
/* The /lfs/repeater directory as a FILESYSTEM, for the storage code ported
|
|
* from upstream (ClientACL, RegionMap), which names files from its root. */
|
|
FILESYSTEM* getFS() { return &_fs; }
|
|
|
|
/* Factory reset - erase all repeater data */
|
|
bool formatFileSystem();
|
|
|
|
/* True if this LittleFS volume already holds THIS role's data. False
|
|
* means the volume belongs to something else - a fresh chip, a companion,
|
|
* or a node that was running Arduino MeshCore, whose nRF52 filesystems
|
|
* overlap our lfs_partition (devdocs/HANDOVER_lfs_arduino_overlap.md).
|
|
* Callers format on false; see the note on BASE_PATH below. */
|
|
bool hasRoleData() const;
|
|
|
|
/* Get base path for repeater storage */
|
|
const char* getBasePath() const;
|
|
|
|
private:
|
|
bool _initialized;
|
|
/* Legacy binary prefs (PrefsCodec): read once to migrate, then kept for
|
|
* firmware from before prefs.json. */
|
|
bool loadLegacyPrefs(const char* path, NodePrefs& prefs);
|
|
static constexpr const char* BASE_PATH = "/lfs/repeater";
|
|
ZephyrFS _fs{BASE_PATH};
|
|
};
|