Was setting the state to ACTIVE prematurely to enable the subscription
inter-lock in one shot signalling mode. But, that is incorrectly
changing state.
Use a callback to indicate subscriber ready and let the participant
ACTIVE happen when the connection actually establishes.
* Add support for WHIP ICE Trickle/Restart.
Tested a bit using the WHIP client at https://github.com/Eyevinn/whip,
but needs a lot more testing. ICERestart is not tested yet.
* comment
* clean up
* Unlabeled (pass through) data channels.
Support data channels than can pass through raw data without any LK
protocol marshaling/unmarshaling.
* statischeck
* test
* error -> warn
* reset data message callback
* Revert "Audio uses signal SignalCid and SdpCid. (#3564)"
This reverts commit cdfbb106d1.
* Revert "Keep simulcast information tied to receiver. (#3563)"
This reverts commit ed5e2f16b2.
* Revert "chore(logs): log VLS type for VP9/AV1 (#3561)"
This reverts commit ad010cfc43.
* Revert "fix(video): determine svc/simulcast from SDP for advanced codecs (#3549)"
This reverts commit 15f565510c.
* chore(deps): update protocol
* Keep simulcast information tied to receiver.
`simulcast` flag in `TrackInfo` is at track lavel. With codec simulcast,
the primary codec (in most cases) is SVC and the backup codec is
simulcast. Back up codec publish changing the track info setting to true
meant that the primary receiver was treated as simulcast if a subscriber
for primary codec joined after the backup codec was published.
Keep track of simulcast flag in receiver.
Also, TrackInfo Cids are from signal. So, keep track of SDP cids
separately. The `simulcastTrackIds` map uses SDP cid. Clean up by all
the SDP cids of a track
* clean up
* clean up
* clean up
* clean up
* test
* Store SdpCid and IsSimulcast in Trackinfo
* clean up
* mock
* fix(video): determine svc/simulcast from SDP for advanced codecs
* fix(explicit-svc): cleanup
* fix(explicit-svc): remove from list on close/remove
* fix(explicit-svc): reorder VLS selection, cleanup
* fix(explicit-svc): todo comments for temporal layer selector
* fix(explicit-svc): remove from simulcastTrackIds even if client does not support unpublish
* Normalize mime type and add utilities.
An attempt to normalize mime type and avoid string compares remembering
to do case insensitive search.
Not the best solution. Open to ideas. But, define our own mime types
(just in case Pion changes things and Pion also does not have red mime
type defined which should be easy to add though) and tried to use it everywhere.
But, as we get a bunch of callbacks and info from Pion, needed conversion in
more places than I anticipated. And also makes it necessary to carry
that cognitive load of what comes from Pion and needing to process it
properly.
* more locations
* test
* Paul feedback
* MimeType type
* more consolidation
* Remove unused
* test
* test
* mime type as int
* use string method
* Pass error details and timeouts. (#3402)
* go mod tidy (#3408)
* Rename CHANGELOG to CHANGELOG.md (#3391)
Enables markdown features in this otherwise already markdown'ish formatted document
* Update config.go to properly process bool env vars (#3382)
Fixes issue https://github.com/livekit/livekit/issues/3381
* fix(deps): update go deps (#3341)
Generated by renovateBot
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Use a Twirp server hook to send API call details to telemetry. (#3401)
* Use a Twirp server hook to send API call details to telemetry.
* mage generate and clean up
* Add project_id
* deps
* - Redact requests
- Do not store responses
- Extract top level fields room_name, room_id, participant_identity,
participant_id, track_id as appropriate
- Store status as int
* deps
* Update pkg/sfu/mime/mimetype.go
* Fix prefer codec test
* handle down track mime changes
---------
Co-authored-by: Denys Smirnov <dennwc@pm.me>
Co-authored-by: Philzen <Philzen@users.noreply.github.com>
Co-authored-by: Pablo Fuente Pérez <pablofuenteperez@gmail.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Paul Wells <paulwe@gmail.com>
Co-authored-by: cnderrauber <zengjie9004@gmail.com>
* Use nonce in data messages to de-dupe SendData API.
With API retries, it is possible that some data messages are sent
multiple times. Check the nonce (if present) to de-dupe data messages
before forwarding it to the clients.
* add nonce to UserPacket
* defer unlock
* 128-bit UUID as nonce
* - UUID nonce
- make a UserPacketDeduper module for easier re-use.
* deps
* feedback
* Set down track connected flag in one-shot-signalling mode.
Also, added maintaing ICE candidates for info purposes.
And doing analytics events (have to maintain the subscription inside
subscriptionmanager to get list of subscribed tracks, so added enough
bits from the async path into sync path to get the analytics bits also)
* comment typo
* method to check if a track name is subscribed
* WIP
* comment
* Verify method on LocalParticipant
* cleanup
* clean up
* pass in one-shot-mode to StartSession
* null message source and sink
* feedback and also remove check in ParticipantImpl for one-shot-mode-filtering as a null sink can be used for that
* Initial plumbing for metrics.
This implements
- metrics received from participant.
- callback to room.
- room distributes it to all other participants (excluding the sending
participant).
- other participants forward to client.
- counting metrics bytes in data channel stats
TODO:
- recording/processing/batching
- should recording/processing/batching happen on publisher side or
subscriber side?
- should metrics be echoed back to publisher?
- grants to publish/subscribe metrics.
* mage generate
* clear OnMetrics on close
* - CanSubscribeMetrics permission.
- Echo back to sender.
* update deps
* No destination identities for metrics
* WIP
* use normalized timestamp for server injected timestamps
* compile
* debug log metrics batch
* correct comment
* add baseTime to wire
* protocol dep
* Scope metrics forwarding to only participants that a participant is
subscribed to.
Also remove the participant_metrics.go file as it was not doing anything
useful.
* update comment
* utils.ErrorIsOneOf
* couple of more utils.CloneProto
To increase visibility of ICE reconnect, logging reconnected at Infow
level. Otherwise, it is hard to see if an ICE restart finished
successfully.
Also, cleaning up ICEConnectionDetails a bit. Just separate out
read-only fields into its own struct and use it for read-only export.
* speed up track publication
Add metrics for track publication and subscription
Return EnabledCodecs in JoinResponse so client can
choose codec without server side codec fallback
Cache remote webrtc track without AddTrackRequest to
let client send publisher offer before AddTrackRequest response
* go mod
* clean code
Enabled by default.
Also, tweak the long term propagation delay a bit. The first propagation
delay itself was too high and the long term initialized with a high
value. Prevent that and also ensure large negtaives do not have an
effect by using a lower bound of 0. Lower bound of 0 is okay as the main
purpose is to track sustained high positive values.
* Send error response when update metadata fails.
Keeping it simple for the first implementation.
- Send error response only if request_id != 0
- Two kinds of errors notified
o does not have permissions - NOT_ALLOWED
o attributes exceeds size limits - INVALID_ARGUMENT
* Check size limits on metadata and name set from client.
Added a name length limit also.
* check name length in service update participant path also
* limit check in limit config
* update protocol
* longer keys
Keeping it simple for the first implementation.
- Send error response only if request_id != 0
- Two kinds of errors notified
o does not have permissions - NOT_ALLOWED
o attributes exceeds size limits - INVALID_ARGUMENT
* Support for participant attributes
* move metadata setters to LocalParticipant
* address feedback
* forward error
* update go mod
* update attributes first
That is the main change. Changed variable name to `isExpectedToResume`
everywhere to be consistent.
Planning to use the callback value in relays to determine if the down
track should be closed or switched to a different up track.
* Handle UpdateLocalAudioTrack and UpdateLocalVideoTrack.
- Update the TrackInfo
- NOTE: populating Stereo and DisableDtx fields although there are
features now.
- The audio features in UpdateLocalAudioTrack is applied as is,
i. e. the update has the latest set of features.
- Emits a track update which will broadcast a participant update.
TODO:
-----
- Telemetry event with track update?
* update deps
