mirror of
https://github.com/Kpa-clawbot/meshcore-analyzer.git
synced 2026-09-25 20:03:36 +00:00
efitenandClaude Opus 5
25f8426d32
Closes #2037. Step 1 (#2045) wired in the nine suites that already passed. This is steps 2 and 3: the four that ran and failed, and the five that could not run at all. After this, the count of suites in `tests/e2e` invoked by nothing goes from 18 to 0. ## Step 2 — the four that ran and failed Triaged against a fixture server in CI with full output kept, not the four-line tail the first probe saved. | suite | verdict | |---|---| | `test-packets-scope-column.js` | passes on master today. It failed on 2026-09-18, so something between the two fixed it. Wired in unchanged rather than investigated. | | `test-node-reach-e2e.js` | test wrong. It waited for the reach map whenever any *link* had GPS; `public/node-reach.js` builds the map only when the *node* has coordinates. Guaranteed 10s timeout on a node with positioned neighbours and no position of its own. | | `test-channel-modal-e2e.js` | both failures test-side. The Add button's visible label was shortened to "+ Add" with the accessible name moved to `aria-label` (`public/channels.js:746`); and `.ch-section-mychannels` is conditional on the visitor having added a channel, which has not happened at that point in the suite. | | `test-touch-targets.js` | three test-side, two a product finding. | The three test-side touch-target failures were the harness measuring controls that are not shown: `.compare-btn` (the CTA was removed in #1646, and `style.css` says so), `.ch-back-btn` (`display:none` outside the mobile channels layout), and `.filter-toggle-btn` (`display:none` on mobile since #1461; the control shown is the navbar mirror, which `mobile-page-actions.js:70` builds as a `.nav-btn`, so it was already measured). All three are dropped from the table with the reason recorded in the file. The remaining two are **not** a test problem: `.nav-btn` and `.ch-icon-btn` are each declared twice in `public/style.css`, 48px in the touch-target block and 44px in their own component rule, and the later one wins. Rather than lower the blanket or hide the failures, the suite now has `DEFAULT_MIN = 48` plus a `MIN_OVERRIDES` table holding those two at their effective 44, so a third selector dropping to 44 still fails the build. The contradiction is **#2052**, with both ways out costed; the override entries should go when it is settled. ## Step 3 — the five that could not run None is deleted. I checked each selector and seam against the product before deciding, and every one still targets a surface that exists and that nothing else covers. Four were written against `@playwright/test`, a runner the project neither installs nor uses anywhere else. Adopting a second runner for twelve tests costs more than porting them, and the precedent is already set: `test-path-inspector-coverage-e2e.js` exists, as its own header says, because `test-path-inspector-e2e.js` could not run. So they are ported to the plain-node Chromium pattern the other 109 suites use. - **`test-issue-1522-trace-url-sync-e2e.js`** — the trace hash in the URL, both directions. `test-e2e-playwright.js` covers that the page loads and searches; it never looks at the URL, which is the whole of #1522. - **`test-marker-outline-weight.js`** — the canvas pulse ring never thins below 2px. There is no CSS rule to read and axe cannot see inside a canvas, so sampling the seam is the only way. Added a guard that the ring was actually visible, so the weight check cannot pass vacuously on a pulse that never rendered. - **`test-pr-1490-live-map-gpu-animations-e2e.js`** — the queue drains, the engine sleeps again, the fading trails stay under the cap of 5, and the canvas sits on `animationsPane` rather than under the markers. - **`test-path-inspector-e2e.js`** — reduced to what nothing else covers: the map side pane, the `/#/traces/<hash>` redirect, the tools landing. Its standalone-page test duplicated the wired coverage suite and is dropped. Its "switching candidate clears prior polyline" case ended after the click with a comment and no assertion, which is the same green-but-empty problem this issue is about; it now compares path counts, and skips loudly when the fixture yields too few candidates. The fifth, **`test-table-sort.js`**, needed `jsdom`, which was declared nowhere. It is a unit test of `public/table-sort.js` filed under `tests/e2e`, so: `jsdom` is a devDependency (lockfile updated, `npm ci` stays consistent), the file moved to `tests/unit/`, and the `domIntegration` group in `scripts/non-unit-tests.json` is gone with its only member. It runs 22 tests. 20 passed immediately; 2 had rotted, because #1648 M2 replaced the up/down glyphs with Phosphor sprites and the direction moved out of `textContent` into the `<use href>`. Those two now read the sprite ref and the `aria-sort` value, so they also guard the accessible announcement. ## Verification `tests/unit/test-table-sort.js` 22/22 and `test-test-inventory.js` pass locally; the E2E suites need a fixture server, which I cannot build here (no cgo toolchain since #1992), so CI is their first run as committed. The triage above was measured in CI, not assumed. ## Not done The per-assertion skips named in the second comment on #2037 are untouched: the two flaky packet-detail cases, the fixture-data ones, and the two `clientRxCoverage` suites that skip wholesale while reporting success. Those need a fixture deployment with coverage enabled, which is its own change. I have not opened it. Option 2 from the issue, making `test-test-inventory.js` require a `deploy.yml` line for every `tests/e2e` file, is also not here. It is the right guard and it is now enforceable, since the list is finally at zero, but it belongs in its own change where a red build means what it says. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>