[Connection]
# Connection type: serial or ble
# serial: Connect via USB serial port
# ble: Connect via Bluetooth Low Energy
connection_type = serial

# Serial port (for serial connection)
# Common ports: /dev/ttyUSB0, /dev/tty.usbserial-*, COM3 (Windows)
serial_port = /dev/ttyUSB0

# BLE device name (for BLE connection)
# Leave commented out for auto-detection, or specify exact device name
#ble_device_name = MeshCore

# Connection timeout in seconds
timeout = 30

[Bot]
# Bot name for identification and logging
bot_name = MeshCoreBot

# RF Data Correlation Settings
# Time window for correlating RF data with messages (seconds)
rf_data_timeout = 15.0

# Time to wait for RF data correlation (seconds)
message_correlation_timeout = 10.0

# Enable enhanced correlation strategies
enable_enhanced_correlation = true

# Bot node ID (leave empty for auto-assignment)
node_id = 

# Enable/disable bot responses
# true: Bot will respond to keywords and commands
# false: Bot will only listen and log messages
enabled = true

# Passive mode (only listen, don't respond)
# true: Bot will not send any messages
# false: Bot will respond normally
passive_mode = false

# Rate limiting in seconds between messages
# Prevents spam by limiting how often the bot can send messages
rate_limit_seconds = 10

# Bot transmission rate limit in seconds between bot messages
# Prevents bot from overwhelming the mesh network
bot_tx_rate_limit_seconds = 1.0

# Send startup advert when bot finishes initializing
# false: No startup advert (default)
# zero-hop: Send local broadcast advert
# flood: Send network-wide flood advert
startup_advert = false

# Auto-manage contact list when new contacts are discovered
# device: Device handles auto-addition using standard auto-discovery mode, bot manages contact list capacity (purge old contacts when near limits)
# bot: Bot automatically adds new companion contacts to device, bot manages contact list capacity (purge old contacts when near limits)
# false: Manual mode - no automatic actions, use !repeater commands to manage contacts (default)
auto_manage_contacts = false

[Keywords]
# Keyword-response pairs (keyword = response format)
# Available fields: {sender}, {connection_info}, {snr}, {timestamp}, {path}
# {sender}: Name/ID of message sender
# {connection_info}: "Direct connection (0 hops)" or "Routed through X hops"
# {snr}: Signal-to-noise ratio in dB
# {timestamp}: Message timestamp in HH:MM:SS format
# {path}: Message routing path (e.g., "01,5f (2 hops)")
# {rssi}: Received Signal Strength Indicator in dBm
test = "Message received from {sender} | {connection_info} | Received at: {timestamp}"
ping = "Pong!"
pong = "Ping!"
help = "Bot Help: test, ping, help, hello, cmd, advert, t phrase, @string, wx, aqi, sun, moon, solar, hfcond, satpass | Use 'help <command>' for details"
cmd = "Available commands: test, ping, help, hello, cmd, advert, t phrase, @string, wx, aqi, sun, moon, solar, hfcond, satpass"

[Channels]
# Channels to monitor (comma-separated)
# Bot will only respond to messages on these channels
# Use exact channel names as configured on your MeshCore node
monitor_channels = general,test,emergency

# Enable DM responses
# true: Bot will respond to direct messages
# false: Bot will ignore direct messages
respond_to_dms = true

[Banned_Users]
# List of banned user IDs (comma-separated)
# Bot will ignore messages from these users
banned_users = 

[Scheduled_Messages]
# Scheduled message format: HHMM = channel:message
# Time format: HHMM (24-hour, no colon)
# Bot will send these messages at the specified times daily
# Example: 0800 = general:Good morning! Weather update coming soon.
0800 = general:Good morning! Bot is online and ready.
1200 = general:Midday status check - all systems operational.
1800 = general:Evening update - bot status: Good

[Logging]
# Log level: DEBUG, INFO, WARNING, ERROR, CRITICAL
# DEBUG: Most verbose, shows all details
# INFO: Standard logging level
# WARNING: Only warnings and errors
# ERROR: Only errors
# CRITICAL: Only critical errors
log_level = INFO

# Log file path (leave empty for console only)
# Bot will write logs to this file in addition to console
log_file = meshcore_bot.log

# Enable colored console output
# true: Use colors in console output
# false: Plain text output
colored_output = true

# MeshCore library log level (separate from bot log level)
# Controls debug output from the meshcore library itself
# Options: DEBUG, INFO, WARNING, ERROR, CRITICAL
meshcore_log_level = INFO

[Custom_Syntax]
# Custom syntax patterns for special message formats
# Format: pattern = "response_format"
# Available fields: {sender}, {phrase}, {connection_info}, {snr}, {timestamp}, {path}
# {phrase}: The text after the trigger (for t_phrase syntax)
# 
# Special syntax: Messages starting with "t " or "T " followed by a phrase
# Example: "t hello world" -> "ack {sender}: hello world | {connection_info}"
t_phrase = "ack {sender}: {phrase} | {connection_info}"

# Special syntax: Messages starting with "@" followed by a phrase (DM only)
# Example: "@hello world" -> "ack {sender}: hello world | {connection_info}"
@_phrase = "ack {sender}: {phrase} | {connection_info}"

[External_Data]
# Weather API key (future feature)
weather_api_key = 

# Weather update interval in seconds (future feature)
weather_update_interval = 3600

# Tide API key (future feature)
tide_api_key = 

# Tide update interval in seconds (future feature)
tide_update_interval = 1800

# N2YO API key for satellite pass information
# Get free key at: https://www.n2yo.com/login/
n2yo_api_key = 

# AirNow API key for AQI data
# Get free key at: https://docs.airnowapi.org/
airnow_api_key = 

[Weather]
# Default state for city name disambiguation
# When users type "wx seattle", it will search for "seattle, WA, USA"
# Use 2-letter state abbreviation (e.g., WA, CA, NY, TX)
default_state = WA

[Solar_Config]
# Default latitude for astronomical calculations (decimal degrees)
# Example: 40.7128 for New York City
default_latitude = 40.7128

# Default longitude for astronomical calculations (decimal degrees)
# Example: -74.0060 for New York City
default_longitude = -74.0060

# URL timeout for external API calls (seconds)
url_timeout = 10

# Use Zulu/UTC time for astronomical data
# true: Use 24-hour UTC format
# false: Use 12-hour local format
use_zulu_time = false