[Connection]
# Connection type: serial, ble, or tcp
# serial: Connect via USB serial port
# ble: Connect via Bluetooth Low Energy
# tcp: Connect via TCP/IP
connection_type = serial

# Serial port (for serial connection)
# Common ports: /dev/ttyUSB0, /dev/tty.usbserial-*, COM3 (Windows)
serial_port = /dev/ttyUSB0

# BLE device name (for BLE connection)
# Leave commented out for auto-detection, or specify exact device name
#ble_device_name = MeshCore

# TCP hostname or IP address (for TCP connection)
#hostname = 192.168.1.60
# TCP port (for TCP connection)
#tcp_port = 5000

# Connection timeout in seconds
timeout = 30

[Bot]
# Bot name for identification and logging
bot_name = MeshCoreBot

# RF Data Correlation Settings
# Time window for correlating RF data with messages (seconds)
rf_data_timeout = 15.0

# Time to wait for RF data correlation (seconds)
message_correlation_timeout = 10.0

# Enable enhanced correlation strategies
enable_enhanced_correlation = true

# Bot node ID (leave empty for auto-assignment)
node_id = 

# Enable/disable bot responses
# true: Bot will respond to keywords and commands
# false: Bot will only listen and log messages
enabled = true

# Passive mode (only listen, don't respond)
# true: Bot will not send any messages
# false: Bot will respond normally
passive_mode = false

# Rate limiting in seconds between messages
# Prevents spam by limiting how often the bot can send messages
rate_limit_seconds = 10

# Bot transmission rate limit in seconds between bot messages
# Prevents bot from overwhelming the mesh network
bot_tx_rate_limit_seconds = 1.0

# Transmission delay in milliseconds before sending messages
# Helps prevent message collisions on the mesh network
# Recommended: 100-500ms for busy networks, 0 for quiet networks
tx_delay_ms = 250

# DM retry settings for improved reliability (meshcore-2.1.6+)
# Maximum number of retry attempts for failed DM sends
dm_max_retries = 3

# Maximum flood attempts (when path reset is needed)
dm_max_flood_attempts = 2

# Number of attempts before switching to flood mode
dm_flood_after = 2

# Timezone for bot operations
# Use standard timezone names (e.g., "America/New_York", "Europe/London", "UTC")
# Leave empty to use system timezone
timezone = 

# Bot location for geographic proximity calculations and astronomical data
# Default latitude for bot location (decimal degrees)
# Example: 40.7128 for New York City, 48.50 for Victoria BC
bot_latitude = 40.7128

# Default longitude for bot location (decimal degrees)
# Example: -74.0060 for New York City, -123.00 for Victoria BC
bot_longitude = -74.0060

[Admin_ACL]
# Admin Access Control List (ACL) for restricted commands
# Only users with public keys listed here can execute admin commands
# Format: comma-separated list of public keys (without spaces)
# Example: 3e14a5fa9c52e7b6b8e14f987cd12ab1e3dc9fb64a2bbf0e19dca85e9f43a120, another key here
admin_pubkeys = 

# Commands that require admin access (comma-separated)
# These commands will only work for users in the admin_pubkeys list
admin_commands = repeater,webviewer

[Companion_Purge]
# Enable companion contact purging
# true: Purge inactive companions when contact list is full
# false: Never purge companions (default: false for safety)
companion_purge_enabled = false

# Days since last DM to consider companion inactive
# Companions who haven't DM'd the bot in this many days may be purged
companion_dm_threshold_days = 30

# Days since last advert to consider companion inactive
# Companions who haven't adverted in this many days may be purged
companion_advert_threshold_days = 30

# Minimum days since last activity (DM or advert) before purge
# Companions must be inactive for at least this many days
companion_min_inactive_days = 30

[Jokes]
# Enable or disable the joke command
# true: Joke command is available
# false: Joke command is disabled
joke_enabled = true

# Enable seasonal joke defaults
# When enabled, October defaults to spooky jokes, December defaults to Christmas jokes
# true: Seasonal defaults are applied
# false: No seasonal defaults (always random)
seasonal_jokes = true

# Enable or disable the dad joke command
# true: Dad joke command is available
# false: Dad joke command is disabled
dadjoke_enabled = true

# Handle long jokes (over 130 characters)
# false: Fetch new jokes until we get a short one
# true: Split long jokes into multiple messages
long_jokes = false

# Send startup advert when bot finishes initializing
# false: No startup advert (default)
# zero-hop: Send local broadcast advert
# flood: Send network-wide flood advert
startup_advert = false

# Auto-manage contact list when new contacts are discovered
# device: Device handles auto-addition using standard auto-discovery mode, bot manages contact list capacity (purge old contacts when near limits)
# bot: Bot automatically adds new companion contacts to device, bot manages contact list capacity (purge old contacts when near limits)
# false: Manual mode - no automatic actions, use !repeater commands to manage contacts (default)
auto_manage_contacts = false

# Interval-based advertising settings
# Send periodic flood adverts at specified intervals
# 0: Disabled (default)
# >0: Send flood advert every N hours
advert_interval_hours = 0

[Keywords]
# Keyword-response pairs (keyword = response format)
# Available fields: {sender}, {connection_info}, {snr}, {timestamp}, {path}
# {sender}: Name/ID of message sender
# {connection_info}: "Direct connection (0 hops)" or "Routed through X hops"
# {snr}: Signal-to-noise ratio in dB
# {timestamp}: Message timestamp in HH:MM:SS format
# {path}: Message routing path (e.g., "01,5f (2 hops)")
# {rssi}: Received Signal Strength Indicator in dBm
test = "ack {sender}{phrase_part} | {connection_info} | Received at: {timestamp}"
ping = "Pong!"
pong = "Ping!"
help = "Bot Help: test (or t), ping, help, hello, cmd, advert, @string, wx, aqi, sun, moon, solar, hfcond, satpass, prefix, path, sports, dice, roll, stats | Use 'help <command>' for details"
cmd = "Available commands: test (or t), ping, help, hello, cmd, advert, @string, wx, aqi, sun, moon, solar, hfcond, satpass, prefix, path, sports, dice, roll, stats"

[Channels]
# Channels to monitor (comma-separated)
# Bot will only respond to messages on these channels
# Use exact channel names as configured on your MeshCore node
monitor_channels = general,test,emergency

# Enable DM responses
# true: Bot will respond to direct messages
# false: Bot will ignore direct messages
respond_to_dms = true

[Banned_Users]
# List of banned user IDs (comma-separated)
# Bot will ignore messages from these users
banned_users = 

[Scheduled_Messages]
# Scheduled message format: HHMM = channel:message
# Time format: HHMM (24-hour, no colon)
# Bot will send these messages at the specified times daily
# Example: 0800 = general:Good morning! Weather update coming soon.
0800 = general:Good morning! Bot is online and ready.
1200 = general:Midday status check - all systems operational.
1800 = general:Evening update - bot status: Good

[Logging]
# Log level: DEBUG, INFO, WARNING, ERROR, CRITICAL
# DEBUG: Most verbose, shows all details
# INFO: Standard logging level
# WARNING: Only warnings and errors
# ERROR: Only errors
# CRITICAL: Only critical errors
log_level = INFO

# Log file path (leave empty for console only)
# Bot will write logs to this file in addition to console
log_file = meshcore_bot.log

# Enable colored console output
# true: Use colors in console output
# false: Plain text output
colored_output = true

# MeshCore library log level (separate from bot log level)
# Controls debug output from the meshcore library itself
# Options: DEBUG, INFO, WARNING, ERROR, CRITICAL
meshcore_log_level = INFO

[Custom_Syntax]
# Custom syntax patterns for special message formats
# Format: pattern = "response_format"
# Available fields: {sender}, {phrase}, {connection_info}, {snr}, {timestamp}, {path}
# {phrase}: The text after the trigger (for custom syntax patterns)
# 
# Note: The "t" command is now handled by the test command as an alias
# "t phrase" works the same as "test phrase" - both use the test response format
# Example: "t hello world" -> "ack {sender}: hello world | {connection_info}"


[External_Data]
# Weather API key (future feature)
weather_api_key = 

# Weather update interval in seconds (future feature)
weather_update_interval = 3600

# Tide API key (future feature)
tide_api_key = 

# Tide update interval in seconds (future feature)
tide_update_interval = 1800

# N2YO API key for satellite pass information
# Get free key at: https://www.n2yo.com/login/
n2yo_api_key = 

# AirNow API key for AQI data
# Get free key at: https://docs.airnowapi.org/
airnow_api_key = 

# Repeater prefix API URL for prefix command
# Leave empty to disable prefix command functionality
# Example: https://map.w0z.is/api/stats/repeater-prefixes?region=seattle
# Note: w0z.is is regionally available - configure your own regional API
repeater_prefix_api_url = 

# Repeater prefix cache duration in hours
# How long to cache prefix data before refreshing from API
# Recommended: 1-6 hours (data doesn't change frequently)
repeater_prefix_cache_hours = 1

[Prefix_Command]
# Enable or disable repeater geolocation in prefix command
# true: Show city names with repeaters when location data is available
# false: Show only repeater names without location information
show_repeater_locations = true

# Use reverse geocoding for coordinates without city names
# true: Automatically look up city names from GPS coordinates
# false: Only show coordinates if no city name is available
use_reverse_geocoding = true

# Hide prefix source information
# true: Hide "Source: domain.com" line from prefix command output
# false: Show source information (default)
hide_source = false

# Prefix heard time window (days)
# Number of days to look back when showing prefix results (default command behavior)
# Only repeaters heard within this window will be shown by default
# Use "prefix XX all" to show all repeaters regardless of time
prefix_heard_days = 7

# Prefix free time window (days)
# Number of days to look back when determining which prefixes are "free"
# Only repeaters heard within this window will be considered as using a prefix
# Repeaters not heard in this window will be excluded from used prefixes list
prefix_free_days = 30

# Maximum range for prefix filtering (kilometers)
# Repeaters beyond this distance from bot location will be excluded from prefix lookups
# This prevents prefix collisions from far-away repeaters from affecting local prefix availability
# Set to 0 to disable range limiting
max_prefix_range = 200

[Weather]
# Default state for city name disambiguation
# When users type "wx seattle", it will search for "seattle, WA, USA"
# Use 2-letter state abbreviation (e.g., WA, CA, NY, TX)
default_state = WA

[Solar_Config]
# URL timeout for external API calls (seconds)
url_timeout = 10

# Use Zulu/UTC time for astronomical data
# true: Use 24-hour UTC format
# false: Use 12-hour local format
use_zulu_time = false

[Channels_List]
# Common hashtag channels for the region
# Format: channel_name = description
# These channels will be listed when users use the 'channels' command
# The bot will automatically add the '#' prefix when displaying channels

# General channels (no category prefix)
general = General discussion and chat
weather = Weather updates and conditions
emergency = Emergency communications and alerts

# Sub-command channels (format: subcommand.channel_name = description)
# Example: channels sports -> sports.sounders = Seattle Sounders FC

# Sports-focused channels
sports.sounders = Seattle Sounders FC
sports.kraken = Seattle Kraken
sports.mariners = Seattle Mariners
sports.seahawks = Seattle Seahawks
sports.reign = OL Reign
sports.storm = Seattle Storm
sports.huskies = Washington Huskies

# Local area channels
local.capitolhill = Capitol Hill neighborhood
local.ballard = Ballard neighborhood
local.fremont = Fremont neighborhood
local.queenanne = Queen Anne neighborhood

# Technology channels
tech.mesh = Mesh networking and technical discussions
tech.hamradio = Amateur radio and ham radio topics
tech.programming = Programming and development
tech.iot = Internet of Things projects

# Emergency-focused channels
emergency.emergency = Emergency communications and alerts
emergency.weather = Weather updates and conditions
emergency.traffic = Traffic updates and road conditions
emergency.hamradio = Amateur radio emergency net

[Sports]
# Enable or disable the sports command
# true: Sports command is available
# false: Sports command is disabled
sports_enabled = true

# Default teams to show when 'sports' command is used without arguments
# Comma-separated list of team names (use lowercase)
teams = seahawks,mariners,sounders,kraken

# Channels where sports command is allowed (leave empty for all channels)
# Comma-separated list of channel names
channels = general,#bot,#sounders,#seahawks

# Channel overrides for sports command
# Format: channel_name = default_team
# Allows sports command to work in specific channels with default team shortcuts
# Example: #sounders = sounders (sports in #sounders becomes "sports sounders")
channel_override = #sounders=sounders,#seahawks=seahawks,#kraken=kraken,#mariners=mariners

# ESPN API timeout in seconds
api_timeout = 10

[Stats]
# Enable or disable the stats command
# true: Stats command is available
# false: Stats command is disabled
stats_enabled = true

# Data retention settings
# Number of days to keep stats data (older data will be automatically cleaned up)
# Recommended: 7-30 days to balance storage usage with historical data
data_retention_days = 7

# Enable automatic cleanup of old stats data
# true: Automatically clean up old data based on data_retention_days
# false: Manual cleanup only
auto_cleanup = true

# Stats collection settings
# Track all incoming messages (not just commands)
# true: Record all messages for comprehensive stats
# false: Only record command executions
track_all_messages = true

# Track command execution details
# true: Record detailed command execution info
# false: Basic command tracking only
track_command_details = true

# Privacy settings
# Anonymize user data in stats
# true: Replace user IDs with anonymous identifiers
# false: Keep actual user IDs in stats
anonymize_users = false

[Path_Command]
# Geographic proximity calculation method
# simple: Use proximity to bot location (default)
# path: Use proximity to previous/next nodes in the path for more realistic routing
proximity_method = simple

# Enable path proximity fallback
# When path proximity can't be calculated (missing location data), fall back to simple proximity
# true: Fall back to bot location proximity when path data unavailable
# false: Show collision warning when path proximity unavailable
path_proximity_fallback = true

# Maximum range for geographic proximity guessing (kilometers)
# Repeaters beyond this distance will have reduced confidence or be rejected
# Set to 0 to disable range limiting
max_proximity_range = 200

# Maximum age for repeater data in path matching (days)
# Only include repeaters that have been heard within this many days
# Helps filter out stale or inactive repeaters from path decoding
# Set to 0 to disable age filtering
max_repeater_age_days = 14

# Recency vs Proximity weighting (0.0 to 1.0)
# Controls how much recency (when last heard) vs proximity (distance) matters
# 0.0 = 100% proximity (only distance matters)
# 1.0 = 100% recency (only when last heard matters)
# 0.4 = 40% recency, 60% proximity (default - balanced for path routing)
# Lower values favor closer repeaters, higher values favor recently heard repeaters
recency_weight = 0.4

# Confidence indicator symbols for path command
# High confidence (>= 0.9): Shows when path decoding is very reliable
high_confidence_symbol = 🎯

# Medium confidence (>= 0.8): Shows when path decoding is reasonably reliable
medium_confidence_symbol = 📍

# Low confidence (< 0.8): Shows when path decoding has uncertainty
low_confidence_symbol = ❓

[Hacker]
# Enable or disable the hacker command
# true: Hacker command is available (responds to Linux commands with supervillain mainframe errors)
# false: Hacker command is disabled
hacker_enabled = false

[Web_Viewer]
# Enable or disable the web data viewer
# true: web viewer is available for viewing bot data
# false: web viewer is disabled
enabled = true

# Web viewer host address
# 127.0.0.1: Only accessible from localhost
# 0.0.0.0: Accessible from any network interface
host = 127.0.0.1

# Web viewer port
# Default: 8080 (viewer uses port 8080)
port = 8080

# Enable debug mode for the web viewer
# true: Enable Flask debug mode (auto-reload on changes)
# false: Production mode
debug = false

# Auto-start web viewer with bot
# true: Start web viewer automatically when bot starts
# false: Start web viewer manually
auto_start = false