From 196c0e392ea87c8a8badf1ea4c8eb3853bff1ce0 Mon Sep 17 00:00:00 2001 From: Innocent Bystander Date: Thu, 1 Oct 2026 00:22:05 -0400 Subject: [PATCH] Documentation updated from feedback --- doc/md/PM5_Start_Here/Getting_Started_With_PM5.md | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md b/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md index 3dcc7e403..8b99af022 100644 --- a/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md +++ b/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md @@ -61,6 +61,11 @@ For more options, look [here](#Build-Extras) * If you see 2 lights (B & D) go on and then OFF, you're in *DFU mode*. Unplug, and try the previous step again. * Run `./pm3-flash-bootrom` * If you see "🚨 The elf file is not applicable to the currently connected device.", you probably forgot to add `PLATFORM=PM5` in your `Makefile.platform` + * `./pm3-flash-bootrom` uses the repo version. + * `pm3-flash-bootrom` uses the system installed version. + * Using the wrong version can throw unexpected errors for the Proxmark5 like these: + * `[=] Permitted flash range: 0x08000000-0x08100000` + * `[!!] The elf file is not applicable to the currently connected device.` * If the above hangs or thows and error, try this: [DFU Install](#DFU-Install) * Unplug. @@ -202,3 +207,4 @@ Do not use them unless you fully understand what you're doing. - [PM5 Button Controller](./PM5_Controllers/PM5_Button_Controller_RM.md) - [PM5 RGB Controller](./PM5_Controllers/PM5_RGB_Controller_RM.md) - [PM5 BWM Install](https://github.com/RfidResearchGroup/Proxmark5_BWM_esp32/blob/master/INSTALL.md) +- [PM5 <--> Flipper Usage](./PM5-FLIPPER-USAGE.md)