Tom HarknessandClaude Sonnet 5 2b5e3e51eb Add PM5 CEP transport for Flipper Zero (WITH_CEP) ...

Wire up the previously-dead Flipper Zero handshake/SPI code from
at32_unit_test.c into a real WITH_CEP platform extra, independent of
BWM (new g_reply_via_cep flag, not reusing BWM's g_reply_via_fpc, so
both transports can run concurrently).

Fixes a real reconnect bug found during hardware bring-up: the
handshake listener was gated on a CC-controller attach edge that
didn't reliably fire on every FAP relaunch, requiring a physical
cable replug to reconnect. Now watches for a fresh incoming byte any
time the link reports attached, with a bounded receive timeout so a
stray byte can never hang the main loop.

RF/FPGA-dependent functionality (hf/lf reads) is out of scope here -
tracked separately. Closes #3667.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

2026-09-26 09:45:51 -04:00

..

Development

Allow skipping setcap, to ease dockerized release tests

2026-09-17 16:59:19 +02:00

em4x70

Major update to EM4x70 support:

2025-03-16 01:05:55 -07:00

Installation_Instructions

move files a bit.

2026-08-31 23:40:24 -04:00

PM5_Start_Here

Add PM5 CEP transport for Flipper Zero (WITH_CEP)

2026-09-26 09:45:51 -04:00

Use_of_Proxmark

Fix pm5 recovery image

2026-08-19 19:28:17 +02:00