dandri/proxmark3
1
0
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2026-10-06 07:47:32 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
ee2d55fafb868e115f8a4f64e20a68ee467964fe
proxmark3/client/CMakeLists.txt
T
iceman1001andClaude Opus 5 (1M context) ee2d55fafb hf mfdes: put a DESFire card image in emulator memory 
Adds the on-device card image a DESFire simulation will read, the client
side that packs a dump into it, and eload / esave / eview.

The layout is in include/desfire_em.h. Tables grow up from the header,
file data grows down from the end, and an allocation only has to leave
the two frontiers apart -- so a three-file card spends a few hundred
bytes rather than a worst case, and the space between them is what the
card has left. The PICC is application 000000 and uses the same struct
as any other application, so key settings and keys are always stated
against an AID. Delete sets a tombstone rather than compacting, which is
not a shortcut: a real card does not reclaim on delete either, measured
as 2080 bytes free with zero applications before an experiment and 2560
after FormatPICC.

Two size limits, and a reader only ever sees the first. cardsize is what
the emulated card claims to hold, so GetFreeMem answers from that and
CreateFile will refuse with OUT_OF_EEPROM when it runs out. Without it a
card impersonating a 2K part would report 7434 bytes free, which no 2K
part does. The image size is what emulator memory physically holds, is
the harder limit, and is never visible.

cardsize is anchored to the free memory the real card reported when the
dump was taken -- observed free plus what we reserve for the same content
-- so the emulation answers what its original answered. That is also a
check on the reservation rule rather than only a convenience: for the
bench card it computed 576 bytes spent, and 1984 + 576 is 2560, exactly
what that card reports when formatted.

Reservation follows what CommitTransaction covers. Backup data, value and
record files each get a shadow region because writes to them are staged
until commit; a standard data file writes through and does not. Sizes
round to a 32 byte granule, which is the granule a real card allocates in.
It deliberately does not reproduce NXP's allocator -- that is
undocumented and does not fit a simple model, a declared 1024 byte record
file costs 1088 on silicon -- so what matters is that the figure is
self-consistent and shrinks as the reader writes.

No new device command. Emulator memory is one shared region, so
CMD_HF_MIFARE_EML_MEMSET and BIG_BUF_EML already reach it, and both
inherit the bounds checking those paths gained earlier.

Verified with the client only, no simulation yet: packing a dump taken
from a DESFire EV2 and walking it back reproduces every field including
file contents byte for byte, the same round trip through the device via
eload and esave is identical, and an image too large is refused by name
rather than truncated -- 'Out of emulator memory laying out AID 112233
file 00: needs 4066 more bytes'.

Co-Authored-By: Claude Opus 5 (1M context)
2026-09-14 19:48:45 +02:00

1010 lines
42 KiB
CMake
Raw Blame History

#-----------------------------------------------------------------------------
# Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# See LICENSE.txt for the text of the license.
#-----------------------------------------------------------------------------
# Usage:
# mkdir build
# cd build
# cmake .. (see below for options)
# make (VERBOSE=1 if needed)
#
# MINGW:
# On ProxSpace 3.4:
# cmake -G"MSYS Makefiles" ..
# On Proxspace 3.3 or less, you need to install cmake:
# pacman -S mingw-w64-ucrt-x86_64-cmake
# /ucrt64/bin/cmake -G"MSYS Makefiles" ..
#
# Android cross-compilation: (ANDROID_ABI=arm64-v8a for a 64b version)
# cmake \
# -DCMAKE_TOOLCHAIN_FILE=<path-to-your-android-ndk>/build/cmake/android.toolchain.cmake \
# -DANDROID_ABI=armeabi-v7a \
# -DANDROID_NATIVE_API_LEVEL=android-19 \
# -DSKIPBT=1 -DSKIPPYTHON=1 -DSKIPPTHREAD=1 ..
message(STATUS "CMake ${CMAKE_VERSION}")
cmake_minimum_required(VERSION 3.10)
project(proxmark3)
SET (PM3_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/..)
if(CMAKE_VERSION VERSION_LESS "3.7.0")
set(CMAKE_INCLUDE_CURRENT_DIR ON)
endif()
find_package(PkgConfig)
# Allow specifying a Python version via cmake option
set(PYTHON3_PKGCONFIG "python3" CACHE STRING "Python3 package config version suffix")
if (NOT SKIPQT EQUAL 1)
set(Qt5_FOUND FALSE)
set(Qt6_FOUND FALSE)
if (NOT SKIPQT6 EQUAL 1)
if(APPLE AND EXISTS /usr/local/opt/qt6)
# Homebrew installs Qt6 in /usr/local/opt/qt6 on Intel Macs.
# Ensure that it can be found by CMake since it is not in the
# default /usr/local prefix.
list(APPEND QT_FIND_PACKAGE_OPTIONS PATHS /usr/local/opt/qt6)
endif(APPLE AND EXISTS /usr/local/opt/qt6)
if(APPLE AND EXISTS /opt/homebrew/opt/qt6)
# Homebrew on Apple Silicon installs Qt6 in
# /opt/homebrew/opt/qt6. Ensure that it can be found by CMake
# since it is not in the default /opt/homebrew prefix.
list(APPEND QT_FIND_PACKAGE_OPTIONS PATHS /opt/homebrew/opt/qt6)
endif(APPLE AND EXISTS /opt/homebrew/opt/qt6)
if(APPLE AND EXISTS /opt/homebrew/opt/qt@6)
# Homebrew may also install Qt6 under the versioned name qt@6
# on Apple Silicon.
list(APPEND QT_FIND_PACKAGE_OPTIONS PATHS /opt/homebrew/opt/qt@6)
endif(APPLE AND EXISTS /opt/homebrew/opt/qt@6)
find_package(Qt6 QUIET COMPONENTS Core Widgets Gui ${QT_FIND_PACKAGE_OPTIONS})
if(Qt6_FOUND)
set(Qt6_LIBRARIES Qt6::Core Qt6::Widgets Qt6::Gui)
# tag Qt6 headers as system headers to avoid warnings in Qt headers
foreach(lib Core Gui Widgets)
if(TARGET Qt6::${lib})
set_target_properties(Qt6::${lib} PROPERTIES
INTERFACE_SYSTEM_INCLUDE_DIRECTORIES
$<TARGET_PROPERTY:Qt6::${lib},INTERFACE_INCLUDE_DIRECTORIES>
)
endif()
endforeach()
endif (Qt6_FOUND)
endif (NOT SKIPQT6 EQUAL 1)
if (NOT Qt6_FOUND)
if(APPLE AND EXISTS /usr/local/opt/qt5)
# Homebrew installs Qt5 (up to at least 5.11.0) in
# /usr/local/opt/qt5. Ensure that it can be found by CMake
# since it is not in the default /usr/local prefix.
# Add it to PATHS so that it doesn't override the
# CMAKE_PREFIX_PATH environment variable.
# QT_FIND_PACKAGE_OPTIONS should be passed to find_package,
# e.g. find_package(Qt5Core ${QT_FIND_PACKAGE_OPTIONS})
list(APPEND QT_FIND_PACKAGE_OPTIONS PATHS /usr/local/opt/qt5)
endif(APPLE AND EXISTS /usr/local/opt/qt5)
if(APPLE AND EXISTS /opt/homebrew/opt/qt@5)
# Homebrew on Apple Silicon installs Qt5 in
# /opt/homebrew/opt/qt@5. Ensure that it can be found by CMake
# since it is not in the default /usr/local prefix.
# Add it to PATHS so that it doesn't override the
# CMAKE_PREFIX_PATH environment variable.
# QT_FIND_PACKAGE_OPTIONS should be passed to find_package,
# e.g. find_package(Qt5Core ${QT_FIND_PACKAGE_OPTIONS})
list(APPEND QT_FIND_PACKAGE_OPTIONS PATHS /opt/homebrew/opt/qt@5)
endif(APPLE AND EXISTS /opt/homebrew/opt/qt@5)
set(QT_PACKAGELIST
Qt5Core
Qt5Widgets
Qt5Gui
)
set(Qt5_FOUND TRUE)
foreach(_qt_package IN LISTS QT_PACKAGELIST)
find_package(${_qt_package} QUIET ${QT_FIND_PACKAGE_OPTIONS})
set(Qt5_LIBRARIES ${${_qt_package}_LIBRARIES} ${Qt5_LIBRARIES})
if(NOT ${_qt_package}_FOUND)
set(Qt5_FOUND FALSE)
endif(NOT ${_qt_package}_FOUND)
endforeach()
endif (NOT Qt6_FOUND)
endif (NOT SKIPQT EQUAL 1)
if (NOT SKIPBT EQUAL 1)
pkg_search_module(BLUEZ QUIET bluez)
endif (NOT SKIPBT EQUAL 1)
if (NOT SKIPPYTHON EQUAL 1)
pkg_search_module(PYTHON3 QUIET ${PYTHON3_PKGCONFIG})
pkg_search_module(PYTHON3EMBED QUIET ${PYTHON3_PKGCONFIG}-embed)
endif (NOT SKIPPYTHON EQUAL 1)
# If cross-compiled, we need to init source and build.
if (CMAKE_TOOLCHAIN_FILE)
if (ANDROID)
set(CFLAGS_EXTERNAL_LIB "CFLAGS=--target=${CMAKE_C_COMPILER_TARGET} -w")
endif (ANDROID)
set(EMBED_READLINE ON)
set(EMBED_BZIP2 ON)
set(EMBED_LZ4 ON)
set(EMBED_GD ON)
endif (CMAKE_TOOLCHAIN_FILE)
if (EMBED_READLINE OR EMBED_BZIP2 OR EMBED_LZ4 OR EMBED_GD)
include(ExternalProject)
endif (EMBED_READLINE OR EMBED_BZIP2 OR EMBED_LZ4 OR EMBED_GD)
if (NOT SKIPREADLINE EQUAL 1)
if (APPLE)
find_path(READLINE_INCLUDE_DIRS readline/readline.h /usr/local/opt/readline/include /opt/local/include /opt/include /usr/local/include /usr/include /opt/homebrew/opt/readline/include NO_DEFAULT_PATH)
find_library(READLINE_LIBRARIES readline /usr/local/opt/readline/lib /opt/local/lib /opt/lib /usr/local/lib /usr/lib /opt/homebrew/opt/readline/lib NO_DEFAULT_PATH)
endif (APPLE)
if (EMBED_READLINE)
ExternalProject_Add(ncurses
URL http://ftp.gnu.org/pub/gnu/ncurses/ncurses-6.1.tar.gz
PREFIX deps/ncurses
DOWNLOAD_DIR ${CMAKE_CURRENT_SOURCE_DIR}/deps/ncurses
CONFIGURE_COMMAND ./configure CC=${CMAKE_C_COMPILER} CXX=${CMAKE_CXX_COMPILER} LD=${CMAKE_C_COMPILER} AR=${CMAKE_AR} RANLIB=${CMAKE_RANLIB} ${CFLAGS_EXTERNAL_LIB} --host=arm --disable-database --with-fallbacks=ansi-generic,ansi-mini,color_xterm,dtterm,dumb,Eterm,Eterm-256color,Eterm-88color,eterm-color,gnome,gnome-256color,guru,hurd,iTerm.app,konsole,konsole-16color,konsole-256color,konsole-base,konsole-linux,konsole-solaris,konsole-vt100,kterm,kterm-color,linux,linux-16color,linux-basic,mac,mlterm,mlterm-256color,mrxvt,mrxvt-256color,mterm,mterm-ansi,mvterm,nsterm,nsterm-16color,nsterm-256color,pty,putty,putty-256color,putty-vt100,rxvt,rxvt-16color,rxvt-256color,rxvt-88color,rxvt-basic,rxvt-color,screen,screen-16color,screen-256color,simpleterm,st-16color,st-256color,st52,st52-color,stv52,tt,tt52,unknown,vt100,vt102,vte,vte-256color,xterm,xterm-16color,xterm-256color,xterm-88color,xterm-basic,xterm-bold,xterm-color,xterm-utf8,xterm-vt220,xterm-vt52,xterm1,xtermc,xtermm --enable-termcap --without-ada --without-debug --without-dlsym --without-gpm --without-develop --without-tests --without-cxx-binding --with-termlib
BUILD_IN_SOURCE ON
BUILD_COMMAND make libs
INSTALL_COMMAND ""
LOG_DOWNLOAD ON
)
ExternalProject_Add_StepTargets(ncurses configure build install)
ExternalProject_Add(readline
URL https://ftp.gnu.org/gnu/readline/readline-8.2.tar.gz
PREFIX deps/readline
DOWNLOAD_DIR ${CMAKE_CURRENT_SOURCE_DIR}/deps/readline
CONFIGURE_COMMAND ./configure CC=${CMAKE_C_COMPILER} CXX=${CMAKE_CXX_COMPILER} LD=${CMAKE_C_COMPILER} AR=${CMAKE_AR} RANLIB=${CMAKE_RANLIB} ${CFLAGS_EXTERNAL_LIB} --host=arm --enable-static
BUILD_IN_SOURCE ON
BUILD_COMMAND make
INSTALL_COMMAND ""
LOG_DOWNLOAD ON
)
ExternalProject_Add_StepTargets(readline configure build install)
set(READLINE_INCLUDE_DIRS ${CMAKE_CURRENT_BINARY_DIR}/deps/readline/src/)
set(READLINE_LIBRARIES ${CMAKE_CURRENT_BINARY_DIR}/deps/readline/src/readline/libreadline.a ${CMAKE_CURRENT_BINARY_DIR}/deps/ncurses/src/ncurses/lib/libtinfo.a)
else (EMBED_READLINE)
find_path(READLINE_INCLUDE_DIRS readline/readline.h)
find_library(READLINE_LIBRARIES readline)
endif (EMBED_READLINE)
if (READLINE_INCLUDE_DIRS AND READLINE_LIBRARIES)
set(READLINE_FOUND ON)
endif (READLINE_INCLUDE_DIRS AND READLINE_LIBRARIES)
else (NOT SKIPREADLINE EQUAL 1)
if (NOT SKIPLINENOISE EQUAL 1)
if (EXISTS ${PM3_ROOT}/client/deps/linenoise/)
set(LINENOISE_LOCAL_FOUND ON)
endif (EXISTS ${PM3_ROOT}/client/deps/linenoise/)
endif (NOT SKIPLINENOISE EQUAL 1)
endif (NOT SKIPREADLINE EQUAL 1)
if (NOT SKIPJANSSONSYSTEM EQUAL 1)
pkg_check_modules(PC_JANSSON QUIET jansson)
find_path(JANSSON_INCLUDE_DIRS
NAMES jansson.h
HINTS ${PC_JANSSON_INCLUDEDIR} ${PC_JANSSON_INCLUDE_DIRS})
find_library(JANSSON_LIBRARIES
NAMES jansson libjansson
HINTS ${PC_JANSSON_LIBDIR} ${PC_JANSSON_LIBRARY_DIRS})
if (JANSSON_INCLUDE_DIRS AND JANSSON_LIBRARIES)
set(JANSSON_FOUND ON)
endif (JANSSON_INCLUDE_DIRS AND JANSSON_LIBRARIES)
endif (NOT SKIPJANSSONSYSTEM EQUAL 1)
if(EMBED_BZIP2)
cmake_policy(SET CMP0114 NEW)
set(BZIP2_BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/deps/bzip2/src/bzip2)
# Specify SOURCE_DIR will cause some errors
ExternalProject_Add(bzip2
GIT_REPOSITORY https://android.googlesource.com/platform/external/bzip2
GIT_TAG platform-tools-30.0.2
PREFIX deps/bzip2
# SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/deps/bzip2
CONFIGURE_COMMAND mkdir -p ${BZIP2_BUILD_DIR} && git archive --format tar HEAD | tar -C ${BZIP2_BUILD_DIR} -x
BUILD_IN_SOURCE ON
BUILD_COMMAND make -C ${BZIP2_BUILD_DIR} -j4 CC=${CMAKE_C_COMPILER} CXX=${CMAKE_CXX_COMPILER} LD=${CMAKE_C_COMPILER} AR=${CMAKE_AR} RANLIB=${CMAKE_RANLIB} ${CFLAGS_EXTERNAL_LIB} libbz2.a
INSTALL_COMMAND ""
LOG_DOWNLOAD ON
)
ExternalProject_Add_StepTargets(bzip2 configure build install)
set(BZIP2_INCLUDE_DIRS ${CMAKE_CURRENT_BINARY_DIR}/deps/bzip2/src/bzip2)
set(BZIP2_LIBRARIES ${CMAKE_CURRENT_BINARY_DIR}/deps/bzip2/src/bzip2/libbz2.a)
set(BZIP2_FOUND ON)
else(EMBED_BZIP2)
find_package (BZip2 REQUIRED)
endif(EMBED_BZIP2)
if(EMBED_LZ4)
cmake_policy(SET CMP0114 NEW)
set(LZ4_BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/deps/lz4/src/lz4)
# Specify SOURCE_DIR will cause some errors
ExternalProject_Add(lz4
GIT_REPOSITORY https://android.googlesource.com/platform/external/lz4
GIT_TAG platform-tools-30.0.2
PREFIX deps/lz4
# SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/deps/lz4
CONFIGURE_COMMAND mkdir -p ${LZ4_BUILD_DIR} && git archive --format tar HEAD | tar -C ${LZ4_BUILD_DIR} -x
BUILD_IN_SOURCE ON
BUILD_COMMAND make -C ${LZ4_BUILD_DIR}/lib -j4 CC=${CMAKE_C_COMPILER} CXX=${CMAKE_CXX_COMPILER} LD=${CMAKE_C_COMPILER} AR=${CMAKE_AR} RANLIB=${CMAKE_RANLIB} ${CFLAGS_EXTERNAL_LIB} liblz4.a
INSTALL_COMMAND ""
LOG_DOWNLOAD ON
)
ExternalProject_Add_StepTargets(lz4 configure build install)
set(LZ4_INCLUDE_DIRS ${CMAKE_CURRENT_BINARY_DIR}/deps/lz4/src/lz4/lib)
set(LZ4_LIBRARIES ${CMAKE_CURRENT_BINARY_DIR}/deps/lz4/src/lz4/lib/liblz4.a)
set(LZ4_FOUND ON)
else(EMBED_LZ4)
find_path(LZ4_INCLUDE_DIRS lz4frame.h)
find_library(LZ4_LIBRARIES lz4)
endif(EMBED_LZ4)
if (LZ4_INCLUDE_DIRS AND LZ4_LIBRARIES)
set(LZ4_FOUND ON)
endif (LZ4_INCLUDE_DIRS AND LZ4_LIBRARIES)
find_package(ZLIB QUIET)
if (NOT SKIPGD EQUAL 1)
if (EMBED_GD)
cmake_policy(SET CMP0114 NEW)
set(GD_BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/deps/gd)
# Specify SOURCE_DIR will cause some errors
ExternalProject_Add(gd
URL https://github.com/libgd/libgd/releases/download/gd-2.3.3/libgd-2.3.3.tar.gz
URL_HASH SHA256=dd3f1f0bb016edcc0b2d082e8229c822ad1d02223511997c80461481759b1ed2
PREFIX deps/gd
CMAKE_ARGS -DBUILD_SHARED_LIBS=OFF -DBUILD_STATIC_LIBS=ON -DENABLE_CPP=0 -DCMAKE_INSTALL_PREFIX=.
PATCH_COMMAND cat ${CMAKE_CURRENT_SOURCE_DIR}/deps/gd-static.patch | patch -p1
)
ExternalProject_Add_StepTargets(gd configure build install)
set(GD_INCLUDE_DIRS ${GD_BUILD_DIR}/src/gd-build/include)
set(GD_LIBRARIES ${GD_BUILD_DIR}/src/gd-build/lib/libgd.a)
set(GD_FOUND ON)
else (EMBED_GD)
pkg_search_module(GD QUIET gdlib)
endif (EMBED_GD)
endif (NOT SKIPGD EQUAL 1)
if (NOT SKIPWHEREAMISYSTEM EQUAL 1)
find_path(WHEREAMI_INCLUDE_DIRS whereami.h)
find_library(WHEREAMI_LIBRARIES whereami)
if (WHEREAMI_INCLUDE_DIRS AND WHEREAMI_LIBRARIES)
set(WHEREAMI_FOUND ON)
endif (WHEREAMI_INCLUDE_DIRS AND WHEREAMI_LIBRARIES)
endif (NOT SKIPWHEREAMISYSTEM EQUAL 1)
# These must be set BEFORE add_subdirectory(deps): CMake copies the
# current variable scope into a subdirectory at that point, so flags set
# further down never reach the bundled deps and jansson fails the
# -Werror=stringop-overflow false positive on its own.
# GCC 10 has issues with false positives on stringop-overflow,
# let's disable them for now (cf https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92955, https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94335)
# beware these flags didn't exist for GCC < 7
if(CMAKE_COMPILER_IS_GNUCXX)
execute_process(COMMAND ${CMAKE_C_COMPILER} -dumpversion OUTPUT_VARIABLE GCC_VERSION)
if (GCC_VERSION VERSION_GREATER 10.0 OR GCC_VERSION VERSION_EQUAL 10.0)
set(CMAKE_C_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_C_FLAGS}")
set(CMAKE_CXX_FLAGS "-Wno-stringop-overflow -Wno-error=stringop-overflow ${CMAKE_CXX_FLAGS}")
endif()
endif(CMAKE_COMPILER_IS_GNUCXX)
add_subdirectory(${PM3_ROOT}/client/deps deps)
set (TARGET_SOURCES
${PM3_ROOT}/common/commonutil.c
${PM3_ROOT}/common/util_posix.c
${PM3_ROOT}/common/bucketsort.c
${PM3_ROOT}/common/crapto1/crapto1.c
${PM3_ROOT}/common/crapto1/crypto1.c
${PM3_ROOT}/common/crc.c
${PM3_ROOT}/common/crc16.c
${PM3_ROOT}/common/crc32.c
${PM3_ROOT}/common/crc64.c
${PM3_ROOT}/common/lfdemod.c
${PM3_ROOT}/common/legic_prng.c
${PM3_ROOT}/common/iso15693tools.c
${PM3_ROOT}/common/cardhelper.c
${PM3_ROOT}/common/generator.c
${PM3_ROOT}/common/bruteforce.c
${PM3_ROOT}/common/hitag2/hitag2_crypto.c
${PM3_ROOT}/client/src/crypto/asn1dump.c
${PM3_ROOT}/client/src/crypto/asn1utils.c
${PM3_ROOT}/client/src/crypto/duoxcrypto.c
${PM3_ROOT}/client/src/crypto/libpcrypto.c
${PM3_ROOT}/client/src/crypto/originality.c
${PM3_ROOT}/client/src/emv/test/cda_test.c
${PM3_ROOT}/client/src/emv/test/crypto_test.c
${PM3_ROOT}/client/src/emv/test/cryptotest.c
${PM3_ROOT}/client/src/emv/test/dda_test.c
${PM3_ROOT}/client/src/emv/test/sda_test.c
${PM3_ROOT}/client/src/emv/cmdemv.c
${PM3_ROOT}/client/src/emv/crypto.c
${PM3_ROOT}/client/src/emv/crypto_polarssl.c
${PM3_ROOT}/client/src/emv/dol.c
${PM3_ROOT}/client/src/emv/emv_pk.c
${PM3_ROOT}/client/src/emv/emv_pki.c
${PM3_ROOT}/client/src/emv/emv_pki_priv.c
${PM3_ROOT}/client/src/emv/emv_roca.c
${PM3_ROOT}/client/src/emv/emv_tags.c
${PM3_ROOT}/client/src/emv/emvcore.c
${PM3_ROOT}/client/src/emv/emvjson.c
${PM3_ROOT}/client/src/emv/tlv.c
${PM3_ROOT}/client/src/fido/additional_ca.c
${PM3_ROOT}/client/src/fido/cbortools.c
${PM3_ROOT}/client/src/fido/cose.c
${PM3_ROOT}/client/src/fido/fidocore.c
${PM3_ROOT}/client/src/iso7816/apduinfo.c
${PM3_ROOT}/client/src/iso7816/iso7816core.c
${PM3_ROOT}/client/src/ksx6924/ksx6924core.c
${PM3_ROOT}/client/src/cipurse/cipursecrypto.c
${PM3_ROOT}/client/src/cipurse/cipursecore.c
${PM3_ROOT}/client/src/cipurse/cipursetest.c
${PM3_ROOT}/client/src/emrtd/emrtd_pace.c
${PM3_ROOT}/client/src/emrtd/emrtd_pacetest.c
${PM3_ROOT}/client/src/loclass/cipher.c
${PM3_ROOT}/client/src/loclass/cipher_bs.c
${PM3_ROOT}/client/src/loclass/cipher_bs_avx2.c
${PM3_ROOT}/client/src/loclass/cipher_bs_avx512.c
${PM3_ROOT}/client/src/loclass/cipher_bs_dispatch.c
${PM3_ROOT}/client/src/loclass/cipher_bs_neon.c
${PM3_ROOT}/client/src/loclass/cipherutils.c
${PM3_ROOT}/client/src/loclass/elite_crack.c
${PM3_ROOT}/client/src/loclass/hash1_brute.c
${PM3_ROOT}/client/src/loclass/ikeys.c
${PM3_ROOT}/client/src/mifare/mad.c
${PM3_ROOT}/client/src/mifare/mad_test.c
${PM3_ROOT}/client/src/mifare/aiddesfire.c
${PM3_ROOT}/client/src/mifare/mfkey.c
${PM3_ROOT}/client/src/mifare/mifare4.c
${PM3_ROOT}/client/src/mifare/mifaredefault.c
${PM3_ROOT}/client/src/mifare/mifarehost.c
${PM3_ROOT}/client/src/mifare/prime.c
${PM3_ROOT}/client/src/mifare/gen4.c
${PM3_ROOT}/client/src/mifare/lrpcrypto.c
${PM3_ROOT}/client/src/mifare/desfirecrypto.c
${PM3_ROOT}/client/src/mifare/desfireem.c
${PM3_ROOT}/client/src/mifare/desfiresecurechan.c
${PM3_ROOT}/client/src/mifare/desfirecore.c
${PM3_ROOT}/client/src/mifare/desfiretest.c
${PM3_ROOT}/client/src/mifare/gallaghercore.c
${PM3_ROOT}/client/src/mifare/gallaghertest.c
${PM3_ROOT}/client/src/nfc/ndef.c
${PM3_ROOT}/client/src/qrcode/qrcode.c
${PM3_ROOT}/client/src/relay/relay_posix.c
${PM3_ROOT}/client/src/relay/relay_win32.c
${PM3_ROOT}/client/src/uart/ringbuffer.c
${PM3_ROOT}/client/src/uart/uart_common.c
${PM3_ROOT}/client/src/uart/uart_posix.c
${PM3_ROOT}/client/src/uart/ble_posix.c
${PM3_ROOT}/client/src/uart/uart_win32.c
${PM3_ROOT}/client/src/ui/overlays.ui
${PM3_ROOT}/client/src/ui/image.ui
${PM3_ROOT}/client/src/aidsearch.c
${PM3_ROOT}/client/src/atrs.c
${PM3_ROOT}/client/src/cmdanalyse.c
${PM3_ROOT}/client/src/cmdbwm.c
${PM3_ROOT}/client/src/cmdcrc.c
${PM3_ROOT}/client/src/cmddata.c
${PM3_ROOT}/client/src/cmdflashmem.c
${PM3_ROOT}/client/src/cmdflashmemspiffs.c
${PM3_ROOT}/client/src/cmdfpga.c
${PM3_ROOT}/client/src/cmdhf.c
${PM3_ROOT}/client/src/cmdhf14a.c
${PM3_ROOT}/client/src/cmdhf14b.c
${PM3_ROOT}/client/src/cmdhf15.c
${PM3_ROOT}/client/src/cmdhfaliro.c
${PM3_ROOT}/client/src/cmdhfcalypso.c
${PM3_ROOT}/client/src/cmdhfcipurse.c
${PM3_ROOT}/client/src/cmdhfcryptorf.c
${PM3_ROOT}/client/src/cmdhfemrtd.c
${PM3_ROOT}/client/src/cmdhfepa.c
${PM3_ROOT}/client/src/cmdhffelica.c
${PM3_ROOT}/client/src/cmdhffido.c
${PM3_ROOT}/client/src/cmdhffmcos.c
${PM3_ROOT}/client/src/cmdhffudan.c
${PM3_ROOT}/client/src/cmdhfgallagher.c
${PM3_ROOT}/client/src/cmdhfgst.c
${PM3_ROOT}/client/src/cmdhficlass.c
${PM3_ROOT}/client/src/cmdhfict.c
${PM3_ROOT}/client/src/cmdhfjooki.c
${PM3_ROOT}/client/src/cmdhfksx6924.c
${PM3_ROOT}/client/src/cmdhflegic.c
${PM3_ROOT}/client/src/cmdhflist.c
${PM3_ROOT}/client/src/cmdhflto.c
${PM3_ROOT}/client/src/cmdhfmf.c
${PM3_ROOT}/client/src/cmdhfmfdes.c
${PM3_ROOT}/client/src/cmdhfmfhard.c
${PM3_ROOT}/client/src/cmdhfmfp.c
${PM3_ROOT}/client/src/cmdhfmfsen.c
${PM3_ROOT}/client/src/cmdhfmfu.c
${PM3_ROOT}/client/src/cmdhfntag424.c
${PM3_ROOT}/client/src/cmdhfsaflok.c
${PM3_ROOT}/client/src/cmdhfsecc.c
${PM3_ROOT}/client/src/cmdhfseos.c
${PM3_ROOT}/client/src/cmdhfst.c
${PM3_ROOT}/client/src/cmdhfst25ta.c
${PM3_ROOT}/client/src/cmdhftesla.c
${PM3_ROOT}/client/src/cmdhftexkom.c
${PM3_ROOT}/client/src/cmdhfthinfilm.c
${PM3_ROOT}/client/src/cmdhftopaz.c
${PM3_ROOT}/client/src/cmdhfvas.c
${PM3_ROOT}/client/src/cmdhfxerox.c
${PM3_ROOT}/client/src/cmdhw.c
${PM3_ROOT}/client/src/cmdlf.c
${PM3_ROOT}/client/src/cmdlfawid.c
${PM3_ROOT}/client/src/cmdlfcotag.c
${PM3_ROOT}/client/src/cmdlfdestron.c
${PM3_ROOT}/client/src/cmdlfem.c
${PM3_ROOT}/client/src/cmdlfem410x.c
${PM3_ROOT}/client/src/cmdlfem4x05.c
${PM3_ROOT}/client/src/cmdlfem4x50.c
${PM3_ROOT}/client/src/cmdlfem4x70.c
${PM3_ROOT}/client/src/cmdlffdxb.c
${PM3_ROOT}/client/src/cmdlfgallagher.c
${PM3_ROOT}/client/src/cmdlfguard.c
${PM3_ROOT}/client/src/cmdlfhid.c
${PM3_ROOT}/client/src/cmdlfhitag.c
${PM3_ROOT}/client/src/cmdlfhitaghts.c
${PM3_ROOT}/client/src/cmdlfhitagu.c
${PM3_ROOT}/client/src/cmdlfidteck.c
${PM3_ROOT}/client/src/cmdlfindala.c
${PM3_ROOT}/client/src/cmdlfio.c
${PM3_ROOT}/client/src/cmdlfjablotron.c
${PM3_ROOT}/client/src/cmdlfkeri.c
${PM3_ROOT}/client/src/cmdlfmotorola.c
${PM3_ROOT}/client/src/cmdlfnedap.c
${PM3_ROOT}/client/src/cmdlfnexwatch.c
${PM3_ROOT}/client/src/cmdlfnoralsy.c
${PM3_ROOT}/client/src/cmdlfpac.c
${PM3_ROOT}/client/src/cmdlfparadox.c
${PM3_ROOT}/client/src/cmdlfpcf7931.c
${PM3_ROOT}/client/src/cmdlfpresco.c
${PM3_ROOT}/client/src/cmdlfpyramid.c
${PM3_ROOT}/client/src/cmdlfsecurakey.c
${PM3_ROOT}/client/src/cmdlft55xx.c
${PM3_ROOT}/client/src/cmdlfti.c
${PM3_ROOT}/client/src/cmdlftrovan.c
${PM3_ROOT}/client/src/cmdlfviking.c
${PM3_ROOT}/client/src/cmdlfvisa2000.c
${PM3_ROOT}/client/src/cmdlfzx8211.c
${PM3_ROOT}/client/src/cmdmad.c
${PM3_ROOT}/client/src/cmdmain.c
${PM3_ROOT}/client/src/cmdmqtt.c
${PM3_ROOT}/client/src/cmdnfc.c
${PM3_ROOT}/client/src/cmdparser.c
${PM3_ROOT}/client/src/cmdpiv.c
${PM3_ROOT}/client/src/cmdscript.c
${PM3_ROOT}/client/src/cmdsmartcard.c
${PM3_ROOT}/client/src/cmdtrace.c
${PM3_ROOT}/client/src/cmdusart.c
${PM3_ROOT}/client/src/cmdwiegand.c
${PM3_ROOT}/client/src/comms.c
${PM3_ROOT}/client/src/fileutils.c
${PM3_ROOT}/client/src/flash.c
${PM3_ROOT}/client/src/frame_progress.c
${PM3_ROOT}/client/src/graph.c
${PM3_ROOT}/client/src/hidsio.c
${PM3_ROOT}/client/src/iso4217.c
${PM3_ROOT}/client/src/jansson_path.c
${PM3_ROOT}/client/src/jsonutils.c
${PM3_ROOT}/client/src/lua_bitlib.c
${PM3_ROOT}/client/src/parsers/parsehrt.c
${PM3_ROOT}/client/src/parsers/parsehid.c
${PM3_ROOT}/client/src/parsers/parsevigik.c
${PM3_ROOT}/client/src/parsers/parsehexact.c
${PM3_ROOT}/client/src/parsers/parseproac.c
${PM3_ROOT}/client/src/parsers/hrtparser/hrtparser.c
${PM3_ROOT}/client/src/pla.c
${PM3_ROOT}/client/src/preferences.c
${PM3_ROOT}/client/src/pm3.c
${PM3_ROOT}/client/src/pm3_binlib.c
${PM3_ROOT}/client/src/pm3_bitlib.c
${PM3_ROOT}/client/src/pm3_dsp.c
${PM3_ROOT}/client/src/pm3_fit.c
${PM3_ROOT}/client/src/pm3line.c
${PM3_ROOT}/client/src/pm3line_vocabulary.c
${PM3_ROOT}/client/src/scandir.c
${PM3_ROOT}/client/src/scripting.c
${PM3_ROOT}/client/src/ui.c
${PM3_ROOT}/client/src/util.c
${PM3_ROOT}/client/src/wiegand_formats.c
${PM3_ROOT}/client/src/wiegand_formatutils.c
${CMAKE_BINARY_DIR}/version_pm3.c
)
# Enable AVX2 support for x86/x64
if(CMAKE_SYSTEM_PROCESSOR MATCHES "x86_64|AMD64|i.86")
set_source_files_properties(
src/loclass/cipher_bs_avx2.c
PROPERTIES COMPILE_OPTIONS "-mavx2"
)
endif()
# Enable AVX 512 support for x64
if(CMAKE_SYSTEM_PROCESSOR MATCHES "x86_64|AMD64")
set_source_files_properties(
src/loclass/cipher_bs_avx512.c
PROPERTIES COMPILE_OPTIONS "-mavx512f"
)
endif()
add_custom_command(
OUTPUT ${CMAKE_BINARY_DIR}/version_pm3.c
COMMAND sh ${PM3_ROOT}/tools/mkversion.sh ${CMAKE_BINARY_DIR}/version_pm3.c || ${CMAKE_COMMAND} -E copy ${PM3_ROOT}/common/default_version_pm3.c ${CMAKE_BINARY_DIR}/version_pm3.c
DEPENDS ${PM3_ROOT}/common/default_version_pm3.c
)
set(ADDITIONAL_SRC "")
set(ADDITIONAL_LNK "")
set(ADDITIONAL_DIRS "")
set(ADDITIONAL_LNKDIRS "")
set(X86_CPUS x86 x86_64 i686)
message(STATUS "CMAKE_SYSTEM_PROCESSOR := ${CMAKE_SYSTEM_PROCESSOR}")
if (APPLE)
message(STATUS "Apple device detected.")
set(ADDITIONAL_SRC ${PM3_ROOT}/client/src/util_darwin.h ${PM3_ROOT}/client/src/util_darwin.m ${ADDITIONAL_SRC})
find_library(UIKIT_LIBRARY UIKit)
if (NOT UIKIT_LIBRARY)
message(STATUS "UIKit.framework NOT found!")
else()
message(STATUS "UIKit.framework found! ${UIKIT_LIBRARY}")
set(ADDITIONAL_LNK "-framework Foundation" "-framework UIKit")
endif()
find_library(APPKIT_LIBRARY AppKit)
if (NOT APPKIT_LIBRARY)
message(STATUS "AppKit.framework NOT found!")
else()
message(STATUS "AppKit.framework found! ${APPKIT_LIBRARY}")
set(ADDITIONAL_LNK "-framework Foundation" "-framework AppKit")
endif()
endif (APPLE)
if(PLATFORM STREQUAL "PM5")
add_definitions("-DDEFAULT_PM5")
endif()
if ((NOT SKIPQT EQUAL 1) AND (Qt5_FOUND OR Qt6_FOUND))
set(CMAKE_AUTOMOC ON)
set(CMAKE_AUTORCC ON)
set(CMAKE_AUTOUIC ON)
set (TARGET_SOURCES
${PM3_ROOT}/client/src/proxgui.cpp
${PM3_ROOT}/client/src/proxguiqt.cpp
${PM3_ROOT}/client/src/imgjp2.c
${TARGET_SOURCES})
# Qt has no JPEG2000 image handler, so we decode EF_DG2 & friends ourselves
set(ADDITIONAL_LNK pm3rrg_rdv4_openjpeg ${ADDITIONAL_LNK})
add_definitions("-DHAVE_GUI")
if (Qt6_FOUND)
set(ADDITIONAL_DIRS ${Qt6_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${Qt6_LIBRARIES} ${ADDITIONAL_LNK})
else (Qt6_FOUND)
if (Qt5_FOUND)
set(ADDITIONAL_DIRS ${Qt5_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${Qt5_LIBRARIES} ${ADDITIONAL_LNK})
endif (Qt5_FOUND)
endif (Qt6_FOUND)
else ((NOT SKIPQT EQUAL 1) AND (Qt5_FOUND OR Qt6_FOUND))
set(TARGET_SOURCES
${PM3_ROOT}/client/src/guidummy.cpp
${TARGET_SOURCES})
endif ((NOT SKIPQT EQUAL 1) AND (Qt5_FOUND OR Qt6_FOUND))
if (NOT SKIPBT EQUAL 1)
if (BLUEZ_FOUND)
add_definitions("-DHAVE_BLUEZ")
set(ADDITIONAL_LNK ${BLUEZ_LIBRARIES} ${ADDITIONAL_LNK})
endif (BLUEZ_FOUND)
endif(NOT SKIPBT EQUAL 1)
if (JANSSON_FOUND)
set(ADDITIONAL_DIRS ${JANSSON_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${JANSSON_LIBRARIES} ${ADDITIONAL_LNK})
endif (JANSSON_FOUND)
if (NOT SKIPPYTHON EQUAL 1)
if (PYTHON3EMBED_FOUND)
add_definitions(-DHAVE_PYTHON)
set(ADDITIONAL_DIRS ${PYTHON3EMBED_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${PYTHON3EMBED_LIBRARIES} ${ADDITIONAL_LNK})
set(ADDITIONAL_LNKDIRS ${PYTHON3EMBED_LIBRARY_DIRS} ${ADDITIONAL_LNKDIRS})
elseif (PYTHON3_FOUND)
add_definitions(-DHAVE_PYTHON)
set(ADDITIONAL_DIRS ${PYTHON3_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${PYTHON3_LIBRARIES} ${ADDITIONAL_LNK})
set(ADDITIONAL_LNKDIRS ${PYTHON3_LIBRARY_DIRS} ${ADDITIONAL_LNKDIRS})
endif (PYTHON3EMBED_FOUND)
endif (NOT SKIPPYTHON EQUAL 1)
if (NOT SKIPREADLINE EQUAL 1)
if (READLINE_FOUND)
add_definitions("-DHAVE_READLINE")
set(ADDITIONAL_DIRS ${READLINE_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${READLINE_LIBRARIES} ${ADDITIONAL_LNK})
endif (READLINE_FOUND)
endif(NOT SKIPREADLINE EQUAL 1)
if (BZIP2_FOUND)
set(ADDITIONAL_DIRS ${BZIP2_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${BZIP2_LIBRARIES} ${ADDITIONAL_LNK})
endif (BZIP2_FOUND)
if (LZ4_FOUND)
set(ADDITIONAL_DIRS ${LZ4_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${LZ4_LIBRARIES} ${ADDITIONAL_LNK})
endif (LZ4_FOUND)
if (ZLIB_FOUND)
add_definitions("-DHAVE_ZLIB")
set(ADDITIONAL_DIRS ${ZLIB_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${ZLIB_LIBRARIES} ${ADDITIONAL_LNK})
endif (ZLIB_FOUND)
if (NOT SKIPGD EQUAL 1 AND GD_FOUND)
set(ADDITIONAL_DIRS ${GD_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${GD_LIBRARIES} ${ADDITIONAL_LNK})
set(ADDITIONAL_LNKDIRS ${GD_LIBRARY_DIRS} ${ADDITIONAL_LNKDIRS})
set(TARGET_SOURCES
${PM3_ROOT}/client/src/imgutils.c
${PM3_ROOT}/client/src/cmdhfwaveshare.c
${TARGET_SOURCES})
add_definitions("-DHAVE_GD")
endif (NOT SKIPGD EQUAL 1 AND GD_FOUND)
if (WHEREAMI_FOUND)
set(ADDITIONAL_DIRS ${WHEREAMI_INCLUDE_DIRS} ${ADDITIONAL_DIRS})
set(ADDITIONAL_LNK ${WHEREAMI_LIBRARIES} ${ADDITIONAL_LNK})
endif (WHEREAMI_FOUND)
message(STATUS "===================================================================")
execute_process(
COMMAND sh ${PM3_ROOT}/tools/mkversion.sh --short
OUTPUT_VARIABLE version_pm3
)
string(STRIP ${version_pm3} version_pm3)
message(STATUS "Version info: ${version_pm3}")
if (SKIPQT EQUAL 1)
message(STATUS "GUI support: skipped")
else (SKIPQT EQUAL 1)
if (Qt6_FOUND)
message(STATUS "GUI support: QT6 found, enabled")
else (Qt6_FOUND)
if (Qt5_FOUND)
message(STATUS "GUI support: QT5 found, enabled")
else (Qt5_FOUND)
message(STATUS "GUI support: QT not found, disabled")
endif (Qt5_FOUND)
endif (Qt6_FOUND)
endif (SKIPQT EQUAL 1)
if (SKIPBT EQUAL 1)
message(STATUS "native BT support: skipped")
else (SKIPBT EQUAL 1)
if (BLUEZ_FOUND)
message(STATUS "native BT support: Bluez found, enabled")
else (BLUEZ_FOUND)
message(STATUS "native BT support: Bluez not found, disabled")
endif (BLUEZ_FOUND)
endif(SKIPBT EQUAL 1)
if (BZIP2_FOUND)
if (EMBED_BZIP2)
message(STATUS "Bzip2 library: embedded")
else (EMBED_BZIP2)
message(STATUS "Bzip2 library: system library found")
endif (EMBED_BZIP2)
else (BZIP2_FOUND)
message(SEND_ERROR "Bzip2 library: Bzip2 not found")
endif (BZIP2_FOUND)
if (LZ4_FOUND)
if (EMBED_LZ4)
message(STATUS "LZ4 library: embedded")
else (EMBED_LZ4)
message(STATUS "LZ4 library: system library found")
endif (EMBED_LZ4)
else (LZ4_FOUND)
message(SEND_ERROR "LZ4 library: LZ4 not found")
endif (LZ4_FOUND)
if (ZLIB_FOUND)
message(STATUS "Zlib library: system library found (enabled)")
else (ZLIB_FOUND)
message(STATUS "Zlib library: not found, disabled")
endif (ZLIB_FOUND)
if (SKIPGD EQUAL 1)
message(STATUS "GD library: skipped")
elseif (GD_FOUND)
if (EMBED_GD)
message(STATUS "GD library: embedded")
else (EMBED_GD)
message(STATUS "GD library: system library found")
endif (EMBED_GD)
else (SKIPGD EQUAL 1)
message(STATUS "GD library: GD not found, disabled")
endif (SKIPGD EQUAL 1)
if (SKIPJANSSONSYSTEM EQUAL 1)
message(STATUS "Jansson library: local library forced")
else (SKIPJANSSONSYSTEM EQUAL 1)
if (JANSSON_FOUND)
message(STATUS "Jansson library: system library found")
else (JANSSON_FOUND)
message(STATUS "Jansson library: system library not found, using local library")
endif (JANSSON_FOUND)
endif (SKIPJANSSONSYSTEM EQUAL 1)
if (SKIPPYTHON EQUAL 1)
message(STATUS "Python3 library: skipped")
else (SKIPPYTHON EQUAL 1)
if (PYTHON3EMBED_FOUND)
message(STATUS "Python3 library: ${PYTHON3_PKGCONFIG}-embed found, enabled")
elseif (PYTHON3_FOUND)
message(STATUS "Python3 library: ${PYTHON3_PKGCONFIG} found, enabled")
else (PYTHON3EMBED_FOUND)
message(STATUS "Python3 library: ${PYTHON3_PKGCONFIG} not found, disabled")
endif (PYTHON3EMBED_FOUND)
endif(SKIPPYTHON EQUAL 1)
if (SKIPREADLINE EQUAL 1)
message(STATUS "Readline library: skipped")
else (SKIPREADLINE EQUAL 1)
if (READLINE_FOUND)
if (EMBED_READLINE)
message(STATUS "Readline library: embedded")
else (EMBED_READLINE)
message(STATUS "Readline library: system library found")
endif (EMBED_READLINE)
else (READLINE_FOUND)
message(STATUS "Readline library: Readline not found, disabled")
endif (READLINE_FOUND)
endif(SKIPREADLINE EQUAL 1)
if (NOT READLINE_FOUND)
if (SKIPLINENOISE EQUAL 1)
message(STATUS "Linenoise library: skipped")
else (SKIPLINENOISE EQUAL 1)
if (LINENOISE_LOCAL_FOUND)
message(STATUS "Linenoise library: enabled")
else (LINENOISE_LOCAL_FOUND)
message(STATUS "Linenoise library: Linenoise not found, disabled")
endif (LINENOISE_LOCAL_FOUND)
endif (SKIPLINENOISE EQUAL 1)
endif (NOT READLINE_FOUND)
if (SKIPWHEREAMISYSTEM EQUAL 1)
message(STATUS "Whereami library: local library forced")
else (SKIPWHEREAMISYSTEM EQUAL 1)
if (WHEREAMI_FOUND)
message(STATUS "Whereami library: system library found")
else (WHEREAMI_FOUND)
message(STATUS "Whereami library: system library not found, using local library")
endif (WHEREAMI_FOUND)
endif (SKIPWHEREAMISYSTEM EQUAL 1)
# Lua SWIG
if (EXISTS ${PM3_ROOT}/client/src/pm3_luawrap.c)
set (TARGET_SOURCES
${PM3_ROOT}/client/src/pm3_luawrap.c
${TARGET_SOURCES})
add_definitions(-DHAVE_LUA_SWIG)
message(STATUS "Lua SWIG: wrapper found")
endif (EXISTS ${PM3_ROOT}/client/src/pm3_luawrap.c)
# Python SWIG
if (NOT SKIPPYTHON EQUAL 1)
if (PYTHON3EMBED_FOUND OR PYTHON3_FOUND)
if (EXISTS ${PM3_ROOT}/client/src/pm3_pywrap.c)
set (TARGET_SOURCES
${PM3_ROOT}/client/src/pm3_pywrap.c
${TARGET_SOURCES})
add_definitions(-DHAVE_PYTHON_SWIG)
message(STATUS "Python SWIG: wrapper found")
endif (EXISTS ${PM3_ROOT}/client/src/pm3_pywrap.c)
endif (PYTHON3EMBED_FOUND OR PYTHON3_FOUND)
endif (NOT SKIPPYTHON EQUAL 1)
message(STATUS "===================================================================")
add_definitions(-DHAVE_SNPRINTF)
add_executable(proxmark3
${PM3_ROOT}/client/src/proxmark3.c
${TARGET_SOURCES}
${ADDITIONAL_SRC}
)
# Handle overlays.ui manually to apply the Qt6 setNum fix
if ((NOT SKIPQT EQUAL 1) AND Qt6_FOUND)
# Find the UIC tool
get_target_property(QT_UIC_EXECUTABLE Qt6::uic IMPORTED_LOCATION)
set(UI_OVERLAYS_INPUT ${PM3_ROOT}/client/src/ui/overlays.ui)
set(UI_OVERLAYS_OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/ui/ui_overlays.h)
file(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/ui)
add_custom_command(
OUTPUT ${UI_OVERLAYS_OUTPUT}
COMMAND ${QT_UIC_EXECUTABLE} ${UI_OVERLAYS_INPUT} -o ${UI_OVERLAYS_OUTPUT}
# Fix bug in headers generated by some Qt6 versions (seen on 6.4.2 & 6.6.3):
# replace &QLabel::setNum with qOverload<int>(&QLabel::setNum)
COMMAND ${CMAKE_COMMAND}
-DFILE=${UI_OVERLAYS_OUTPUT}
-P ${CMAKE_CURRENT_BINARY_DIR}/fix_overlays.cmake
DEPENDS ${UI_OVERLAYS_INPUT}
COMMENT "UIC overlays.ui (with Qt6 setNum fix)"
)
# Write the sed-equivalent cmake script at configure time
file(WRITE ${CMAKE_CURRENT_BINARY_DIR}/fix_overlays.cmake [=[
file(READ "${FILE}" _content)
string(REPLACE
"&QLabel::setNum);"
"qOverload<int>(&QLabel::setNum));"
_content "${_content}")
file(WRITE "${FILE}" "${_content}")
]=])
# Add the generated header as a source so it gets built
# and tell AUTOUIC to skip the .ui file (we handle it ourselves)
set_property(SOURCE ${UI_OVERLAYS_INPUT} PROPERTY SKIP_AUTOUIC ON)
# Make proxmark3 depend on the generated header
target_sources(proxmark3 PRIVATE ${UI_OVERLAYS_OUTPUT})
target_include_directories(proxmark3 PRIVATE ${CMAKE_CURRENT_BINARY_DIR})
endif()
target_compile_options(proxmark3 PUBLIC -Wall -Werror -Wno-missing-braces -O3)
if (EMBED_READLINE)
if (NOT SKIPREADLINE EQUAL 1)
add_dependencies(proxmark3 ncurses readline)
endif (NOT SKIPREADLINE EQUAL 1)
endif (EMBED_READLINE)
if (EMBED_BZIP2)
add_dependencies(proxmark3 bzip2)
endif (EMBED_BZIP2)
if (EMBED_LZ4)
add_dependencies(proxmark3 lz4)
endif (EMBED_LZ4)
if (MINGW)
# Mingw uses by default Microsoft printf, we want the GNU printf (e.g. for %z)
# and setting _ISOC99_SOURCE sets internally __USE_MINGW_ANSI_STDIO=1
# FTR __USE_MINGW_ANSI_STDIO seems deprecated in Mingw32
# but not Mingw64 https://fr.osdn.net/projects/mingw/lists/archive/users/2019-January/000199.html
target_compile_definitions(proxmark3 PRIVATE _ISOC99_SOURCE)
set(CMAKE_C_FLAGS "-mno-ms-bitfields -fexec-charset=cp850 ${CMAKE_C_FLAGS}")
set(CMAKE_CXX_FLAGS "-mno-ms-bitfields -fexec-charset=cp850 ${CMAKE_CXX_FLAGS}")
# link Winsock2
set(ADDITIONAL_LNK ws2_32 ${ADDITIONAL_LNK})
endif (MINGW)
target_include_directories(proxmark3 PRIVATE
${PM3_ROOT}/common
${PM3_ROOT}/common_fpga
${PM3_ROOT}/include
${PM3_ROOT}/client/src
${PM3_ROOT}/client/include
${ADDITIONAL_DIRS}
)
if (NOT APPLE)
# required for Raspberry Pi, but breaks with clang (OSX). Need to be at the end of the linker line.
set(ADDITIONAL_LNK ${ADDITIONAL_LNK} -Wl,--as-needed -latomic -Wl,--no-as-needed)
else (NOT APPLE)
#set_property(TARGET proxmark3 PROPERTY LINK_FLAGS "-Wl,-undefined dynamic_lookup")
set(ADDITIONAL_LNK ${ADDITIONAL_LNK} -Wl,-undefined,dynamic_lookup)
endif (NOT APPLE)
if (NOT JANSSON_FOUND)
set(ADDITIONAL_LNK pm3rrg_rdv4_jansson ${ADDITIONAL_LNK})
endif (NOT JANSSON_FOUND)
if (NOT READLINE_FOUND)
if (LINENOISE_LOCAL_FOUND)
add_definitions("-DHAVE_LINENOISE")
set(ADDITIONAL_LNK pm3rrg_rdv4_linenoise ${ADDITIONAL_LNK})
endif (LINENOISE_LOCAL_FOUND)
endif (NOT READLINE_FOUND)
if (NOT WHEREAMI_FOUND)
set(ADDITIONAL_LNK pm3rrg_rdv4_whereami ${ADDITIONAL_LNK})
endif (NOT WHEREAMI_FOUND)
target_link_libraries(proxmark3 PRIVATE
m
pm3rrg_rdv4_mbedtls
pm3rrg_rdv4_cliparser
pm3rrg_rdv4_lua
pm3rrg_rdv4_tinycbor
pm3rrg_rdv4_amiibo
pm3rrg_rdv4_reveng
pm3rrg_rdv4_hardnested
pm3rrg_rdv4_id48
pm3rrg_rdv4_mqtt
pm3rrg_rdv4_vec
${ADDITIONAL_LNK})
if (NOT SKIPPTHREAD EQUAL 1)
target_link_libraries(proxmark3 PRIVATE pthread)
endif (NOT SKIPPTHREAD EQUAL 1)
if (NOT SKIPPYTHON EQUAL 1)
# OSX have a hard time compiling python3 dependency with older cmake.
if (PYTHON3EMBED_FOUND OR PYTHON3_FOUND)
if (CMAKE_VERSION VERSION_LESS 3.13)
message( SEND_ERROR "Your CMAKE version is too old for Apple platform, please update to a version >=3.13" )
endif (CMAKE_VERSION VERSION_LESS 3.13)
endif (PYTHON3EMBED_FOUND OR PYTHON3_FOUND)
endif (NOT SKIPPYTHON EQUAL 1)
target_link_directories(proxmark3 PRIVATE ${ADDITIONAL_LNKDIRS})
install(TARGETS proxmark3 DESTINATION "bin")
# Grant the capabilities the BLE connect-by-name scan needs (raw HCI: CAP_NET_RAW
# + CAP_NET_ADMIN). Linux + Bluez only, and non-fatal: if setcap is absent, the
# target filesystem lacks xattr support, or this is a staged/packaged install,
# it just warns. Connect-by-address (-p ble:<MAC>) never needs this.
if (BLUEZ_FOUND AND CMAKE_SYSTEM_NAME STREQUAL "Linux")
find_program(SETCAP_EXECUTABLE setcap)
if (SETCAP_EXECUTABLE)
install(CODE "
set(_pm3_bin \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/bin/proxmark3\")
execute_process(
COMMAND \"${SETCAP_EXECUTABLE}\" cap_net_raw,cap_net_admin+eip \"\${_pm3_bin}\"
RESULT_VARIABLE _pm3_setcap_rc)
if (NOT _pm3_setcap_rc EQUAL 0)
message(WARNING \"setcap failed - BLE connect-by-name (-p ble:<name>) will need sudo; connect-by-MAC is unaffected\")
endif ()
")
else ()
message(STATUS "setcap not found - BLE connect-by-name will need sudo at runtime")
endif ()
endif ()
install(DIRECTORY cmdscripts lualibs luascripts pyscripts resources dictionaries DESTINATION "share/proxmark3")
add_custom_command(OUTPUT lualibs/pm3_cmd.lua
COMMAND "awk -f pm3_cmd_h2lua.awk ../include/pm3_cmd.h > lualibs/pm3_cmd.lua"
COMMENT "Creating lualibs/pm3_cmd.lua"
)
add_custom_command(OUTPUT lualibs/mfc_default_keys.lua
COMMAND "awk -f default_keys_dic2lua.awk mfc_default_keys.dic > lualibs/mfc_default_keys.lua"
COMMENT "Creating lualibs/mfc_default_keys.lua"
)
#"make package" will trigger this
SET(CPACK_GENERATOR "DEB")
SET(CPACK_DEBIAN_PACKAGE_MAINTAINER "Iceman")
INCLUDE(CPack)
Reference in New Issue View Git Blame Copy Permalink