; T-Deck environment using Bluedroid BLE stack (fallback, uses more RAM)
[env:tdeck-bluedroid]
extra_scripts =
    pre:version.py
    pre:generate_splash.py
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino

; T-Deck Plus has ESP32-S3 with 8MB Flash + 8MB PSRAM
board_build.flash_mode = qio
board_build.partitions = partitions.csv
board_build.arduino.memory_type = qio_opi
board_upload.flash_size = 8MB

; Enable PSRAM (required for LVGL buffers)
board_build.arduino.psram_type = opi

; Serial monitor
monitor_speed = 115200
monitor_filters =
    esp32_exception_decoder
    time

; Dependencies
lib_deps =
    lvgl/lvgl@^8.3.11
    bblanchon/ArduinoJson@^7.4.2
    hideakitai/MsgPack@^0.4.2
    rweather/Crypto@^0.4.0
    mikalhart/TinyGPSPlus@^1.0.3
    jgromes/RadioLib@^6.0
    WiFi
    SPI
    Wire
    SPIFFS
    tdeck_ui
    universal_filesystem
    sx1262_interface
    tone
    auto_interface
    ble_interface
    lxst_audio
    sh123/esp32_codec2@^1.0.7
    symlink://${PROJECT_DIR}/deps/microReticulum/lib/libbz2

; Library dependency finder mode (deep search)
lib_ldf_mode = deep+
lib_extra_dirs = deps/microReticulum

; Build configuration
build_type = release
build_flags =
    -std=gnu++11
    -DBOARD_HAS_PSRAM
    -DBOARD_ESP32
    ; Arduino loop task stack — Codec2 decode (lpc_post_filter + kiss_fft)
    ; uses ~6KB stack on top of ~10KB normal peak. 24KB gives safe headroom.
    -DARDUINO_LOOP_STACK_SIZE=24576
    -DARDUINO_USB_CDC_ON_BOOT=1
    -DARDUINO_USB_MODE=1
    -DLV_CONF_INCLUDE_SIMPLE
    -Ilib
    -Ideps/microReticulum/lib/libbz2
    -Ideps/microReticulum/src
    -DBZ_NO_STDIO
    -DUSE_BLUEDROID
    -Os
    -DCORE_DEBUG_LEVEL=2
    ; Enable memory instrumentation (heap/stack monitoring)
    ; Remove this flag to disable instrumentation and eliminate overhead
    -DMEMORY_INSTRUMENTATION_ENABLED
    ; Enable boot profiling (timing instrumentation for setup phases)
    ; Remove this flag to disable boot profiling
    -DBOOT_PROFILING_ENABLED
    ; Reduce log verbosity during boot for faster startup
    ; CORE_DEBUG_LEVEL=2 (WARNING) reduces INFO-level log output
    -DBOOT_REDUCED_LOGGING

; Default T-Deck environment using NimBLE BLE stack (uses ~100KB less RAM than Bluedroid)
[env:tdeck]
extra_scripts =
    pre:version.py
    pre:generate_splash.py
    pre:patch_nimble.py
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino

; T-Deck Plus has ESP32-S3 with 8MB Flash + 8MB PSRAM
board_build.flash_mode = qio
board_build.partitions = partitions.csv
board_build.arduino.memory_type = qio_opi
board_upload.flash_size = 8MB

; Enable PSRAM (required for LVGL buffers)
board_build.arduino.psram_type = opi

; Serial monitor
monitor_speed = 115200
monitor_filters =
    esp32_exception_decoder
    time

; Library dependency finder mode (deep search)
lib_ldf_mode = deep+
lib_extra_dirs = deps/microReticulum

; Build type
build_type = release
lib_deps =
    lvgl/lvgl@^8.3.11
    bblanchon/ArduinoJson@^7.4.2
    hideakitai/MsgPack@^0.4.2
    rweather/Crypto@^0.4.0
    mikalhart/TinyGPSPlus@^1.0.3
    jgromes/RadioLib@^6.0
    WiFi
    SPI
    Wire
    SPIFFS
    tdeck_ui
    universal_filesystem
    sx1262_interface
    tone
    auto_interface
    h2zero/NimBLE-Arduino@^2.1.0
    ble_interface
    lxst_audio
    sh123/esp32_codec2@^1.0.7
    symlink://${PROJECT_DIR}/deps/microReticulum/lib/libbz2

; Build configuration
build_flags =
    -std=gnu++11
    -DBOARD_HAS_PSRAM
    -DBOARD_ESP32
    ; Arduino loop task stack — Codec2 decode (lpc_post_filter + kiss_fft)
    ; uses ~6KB stack on top of ~10KB normal peak. 24KB gives safe headroom.
    -DARDUINO_LOOP_STACK_SIZE=24576
    -DARDUINO_USB_CDC_ON_BOOT=1
    -DARDUINO_USB_MODE=1
    -DLV_CONF_INCLUDE_SIMPLE
    -Ilib
    -Ideps/microReticulum/lib/libbz2
    -Ideps/microReticulum/src
    -DBZ_NO_STDIO
    -DUSE_NIMBLE
    -DCONFIG_BT_NIMBLE_MEM_ALLOC_MODE_EXTERNAL=1
    -Os
    -DCORE_DEBUG_LEVEL=2
    ; Enable memory instrumentation (heap/stack monitoring)
    ; Remove this flag to disable instrumentation and eliminate overhead
    -DMEMORY_INSTRUMENTATION_ENABLED
    ; Enable boot profiling (timing instrumentation for setup phases)
    ; Remove this flag to disable boot profiling
    -DBOOT_PROFILING_ENABLED
    ; Reduce log verbosity during boot for faster startup
    ; CORE_DEBUG_LEVEL=2 (WARNING) reduces INFO-level log output
    -DBOOT_REDUCED_LOGGING

; OTA flashing environment (wireless upload via ArduinoOTA)
; Usage: pio run -e tdeck-ota -t upload
[env:tdeck-ota]
extends = env:tdeck
upload_protocol = custom
upload_command = "$PYTHONEXE" tools/espota.py -i pyxis-tdeck.local -p 3232 -f $SOURCE