* xftp: add PostgreSQL backend design spec
* update doc
* adjust styling
* add implementation plan
* refactor: move usedStorage from FileStore to XFTPEnv
* refactor: add getUsedStorage, getFileCount, expiredFiles store functions
* refactor: change file store operations from STM to IO
* refactor: extract FileStoreClass typeclass, move STM impl to Store.STM
* refactor: make XFTPEnv and server polymorphic over FileStoreClass
* feat: add PostgreSQL store skeleton with schema migration
* feat: implement PostgresFileStore operations
* feat: add PostgreSQL INI config, store dispatch, startup validation
* feat: add database import/export CLI commands
* test: add PostgreSQL backend tests
* fix: map ForeignKeyViolation to AUTH in addRecipient
When a file is concurrently deleted while addRecipient runs, the FK
constraint on recipients.sender_id raises ForeignKeyViolation. Previously
this propagated as INTERNAL; now it returns AUTH (file not found).
* fix: only decrement usedStorage for uploaded files on expiration
expireServerFiles unconditionally subtracted file_size from usedStorage
for every expired file, including files that were never uploaded (no
file_path). Since reserve only increments usedStorage during upload,
expiring never-uploaded files caused usedStorage to drift negative.
* fix: handle setFilePath error in receiveServerFile
setFilePath result was discarded with void. If it failed (file deleted
concurrently, or double-upload where file_path IS NULL guard rejected
the second write), the server still reported FROk, incremented stats,
and left usedStorage permanently inflated. Now the error is checked:
on failure, reserved storage is released and AUTH is returned.
* fix: escape double quotes in COPY CSV status field
The status field (e.g. "blocked,reason=spam,notice={...}") is quoted in
CSV for COPY protocol, but embedded double quotes from BlockingInfo
notice (JSON) were not escaped. This could break CSV parsing during
import. Now double quotes are escaped as "" per CSV spec.
* fix: reject upload to blocked file in Postgres setFilePath
In Postgres mode, getFile returns a snapshot TVar for fileStatus. If a
file is blocked between getFile and setFilePath, the stale status check
passes but the upload should be rejected. Added status = 'active' to
the UPDATE WHERE clause so blocked files cannot receive uploads.
* fix: add CHECK constraint on file_size > 0
Prevents negative or zero file_size values at the database level.
Without this, corrupted data from import or direct DB access could
cause incorrect storage accounting (getUsedStorage sums file_size,
and expiredFiles casts to Word32 which wraps negative values).
* fix: check for existing data before database import
importFileStore now checks if the target database already contains
files and aborts with an error. Previously, importing into a non-empty
database would fail mid-COPY on duplicate primary keys, leaving the
database in a partially imported state.
* fix: clean up disk file when setFilePath fails in receiveServerFile
When setFilePath fails (file deleted or blocked concurrently, or
duplicate upload), the uploaded file was left orphaned on disk with
no DB record pointing to it. Now the file is removed on failure,
matching the cleanup in the receiveChunk error path.
* fix: check storeAction result in deleteOrBlockServerFile_
The store action result (deleteFile/blockFile) was discarded with void.
If the DB row was already deleted by a concurrent operation, the
function still decremented usedStorage, causing drift. Now the error
propagates via ExceptT, skipping the usedStorage adjustment.
* fix: check deleteFile result in expireServerFiles
deleteFile result was discarded with void. If a concurrent delete
already removed the file, deleteFile returned AUTH but usedStorage
was still decremented — causing double-decrement drift. Now the
usedStorage adjustment and filesExpired stat only run on success.
* refactor: merge STM store into Store.hs, parameterize server tests
- Move STMFileStore and its FileStoreClass instance from Store/STM.hs
back into Store.hs — the separate file was unnecessary indirection
for the always-present default implementation.
- Parameterize xftpFileTests over store backend using HSpec SpecWith
pattern (following SMP's serverTests approach). The same 11 tests
now run against both memory and PostgreSQL backends via a bracket
parameter, eliminating all *Pg test duplicates.
- Extract shared run* functions (runTestFileChunkDeliveryAddRecipients,
runTestWrongChunkSize, runTestFileChunkExpiration, runTestFileStorageQuota)
from inlined test bodies.
* refactor: clean up per good-code review
- Remove internal helpers from Postgres.hs export list (withDB, withDB',
handleDuplicate, assertUpdated, withLog are not imported externally)
- Replace local isNothing_ with Data.Maybe.isNothing in Env.hs
- Consolidate duplicate/unused imports in XFTPStoreTests.hs
- Add file_path IS NULL and status guards to STM setFilePath, matching
the Postgres implementation semantics
* test: parameterize XFTP server, agent and CLI tests over store backend
- xftpTest/xftpTest2/xftpTest4/xftpTestN now take XFTPTestBracket as
first argument, enabling the same test to run against both memory
and PostgreSQL backends.
- xftpFileTests (server tests), xftpAgentFileTests (agent tests), and
xftpCLIFileTests (CLI tests) are SpecWith-parameterized suites that
receive the bracket from HSpec's before combinator.
- Test.hs runs each parameterized suite twice: once with
xftpMemoryBracket, once with xftpPostgresBracket (CPP-guarded).
- STM-specific tests (store log restore/replay) stay in memory-only
xftpAgentTests. SNI/CORS tests stay in memory-only xftpServerTests.
* refactor: remove dead test wrappers after parameterization
Remove old non-parameterized test wrapper functions that were
superseded by the store-backend-parameterized test suites.
All test bodies (run* and _ functions) are preserved and called
from the parameterized specs. Clean up unused imports.
* feat: add manual tests and guide
* refactor: merge file_size CHECK into initial migration
* refactor: extract rowToFileRec shared by getFile sender/recipient paths
* refactor: parameterize XFTPServerConfig over store type
Embed XFTPStoreConfig s as serverStoreCfg field, matching SMP's
ServerConfig. runXFTPServer and newXFTPServerEnv now take a single
XFTPServerConfig s. Restore verifyCmd local helper structure.
* refactor: minimize diff in tests
Restore xftpServerTests and xftpAgentTests bodies to match master
byte-for-byte (only type signatures change for XFTPTestBracket
parameterization); inline the runTestXXX helpers that were split
on this branch.
* refactor: restore getFile position to match master
* refactor: rename withSTMFile back to withFile
* refactor: close store log inside closeFileStore for STM backend
Move STM store log close responsibility into closeFileStore to
match PostgresFileStore, removing the asymmetry where only PG's
close was self-contained.
STMFileStore holds the log in a TVar populated by newXFTPServerEnv
after readWriteFileStore; stopServer no longer needs the explicit
withFileLog closeStoreLog call. Writes still go through XFTPEnv.storeLog
via withFileLog (unchanged).
* refactor: rename XFTPTestBracket to XFTPTestServer
* fix: move file_size check from PG schema to store log import
* refactor: use SQL-standard type names in XFTP schema
* perf: batch expired file deletions with deleteFiles
* refactor: stream export instead of loading recipients into memory
* refactor: parameterize XFTP store with FSType singleton dispatch
* refactor: minimize diff per review feedback
* refactor: use types over strings, deduplicate parser
* refactor: always parse database store type, fail at startup
* fix compilation without postgresql
* refactor: always parse database store type, fail at startup
* agent: support client notices
* improve
* fix, test
* rename
* cleanup
* send and process notices in more cases
* dont delete
* dont remove notice on other permanent errors
* dont remove notice if there is no notice ID in queue
* add server to error
* allow deleting
* only use notice if key hash matches
* servers: blocking records for content moderation
* update
* encode BLOCKED as AUTH in old versions
* update
* unblock queue command
* test, status command
* smp: command authorization
* fix encoding, most tests
* remove old tests
* authorize via crypto_box
* extract authenticator to Crypto module
* make TransmissionAuth Maybe
* rfc
* support authenticators in NTF protocol, test matrix (no backwards compatibility yet from new clients to old servers)
* fix/add tests, add version config to "small" agent
* separate client and server versions for SMP protocol
* test batching SMP v7
* do not send session ID in each transmission
* refactor auth verification in the server, split tests
* server "warm up" fixes timing test
* uncomment SUB timing test
* comments, disable two timing tests
* rename version
* increase auth timing test failure threshold
* use different algorithms to authorize snd/rcv commands, use random correlation ID
* transport: fetch and store server certificate (#985)
* THandleParams (WIP, does not compile)
* transport: fetch and store server certificate
* smp: add getOnlinePubKey example to smpClientHandshake
* add server certs and sign authPub
* cleanup
* update
* style
* load server certs from test fixtures
* sign ntf authPubKey
* fix onServerCertificate
* increase delay before sending messages
* require certificate with key in SMP server handshake
---------
Co-authored-by: Evgeny Poberezkin <evgeny@poberezkin.com>
* remove dhSecret from THandle
* remove v8, merge all changes to one version
* parameterize THandle
* rfc: transmission ecnryption
* Revert "parameterize THandle"
This reverts commit 75adfc94fb.
* use batch syntax for ntf server commands
* separate encodeTransmission when there is no key
* typo
Co-authored-by: spaced4ndy <8711996+spaced4ndy@users.noreply.github.com>
* rename
* diff
---------
Co-authored-by: Alexander Bondarenko <486682+dpwiz@users.noreply.github.com>
Co-authored-by: spaced4ndy <8711996+spaced4ndy@users.noreply.github.com>
* xftp: expire files on the server
* track/limit used storage
* support storage quota and disabling queue creation in CLI parameters
* fix ini file
* correction
---------
Co-authored-by: spaced4ndy <8711996+spaced4ndy@users.noreply.github.com>
sh