# Self-hosted SNRC stack

One `docker compose up` runs the self-hosted SimpleX Namespace (SNRC) backend
against **Ethereum mainnet** (where the `.testing` contracts live):

| # | Component | What it does |
|---|---|---|
| 1 | **reth + nimbus** | self-hosted Ethereum node (`--minimal` — enough for the resolver's `eth_call` at chain head) |
| 2 | **resolver** | the REST resolver the smp-server's `[NAMES]` role queries (`snrc-resolve.py`) |

## Requirements

- **Docker** + Compose v2.
- **≥ 300 GB NVMe SSD** for `reth --minimal` (~260 GB on mainnet; TLC, not QLC
  — QLC stalls during sync) + **32 GB RAM**, fast multi-core CPU.
- **~1 day** for the initial reth sync. The resolver returns errors until reth
  has caught up — that's expected.
- Firewall: open p2p ports `30303` (tcp/udp) and `9000` (tcp/udp).

## 1. Configure

Edit `.env` — the defaults work as-is; override only if needed:

```sh
NETWORK=mainnet                                               # default
TRUSTED_NODE_URL=https://mainnet-checkpoint-sync.attestant.io # default
```

Everything else (NAT) has a working default baked into `docker-compose.yml`;
uncomment the hints in `.env` only to override.

## 2. Run

```sh
cd scripts/resolver
docker compose up -d
docker compose logs -f reth resolver
```

`depends_on` handles ordering automatically (start node → start resolver).

## 3. Wait for the node to sync

```sh
docker compose logs --tail=20 reth
```

This is the long pole (~1 day on mainnet). Until reth is synced the resolver
returns `502`.

## Verify

Run these once the stack is up (the node-dependent ones pass after sync):

**1. reth is reachable and reporting a block:**
```sh
curl -s -X POST http://127.0.0.1:8545 \
  -H 'content-type: application/json' \
  -d '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' | jq
```

**2. resolver is healthy:**
```sh
curl -s http://127.0.0.1:8000/health | jq
# → {"ok": true, "rpc": "http://reth:8545", "registries": {"testing": "0x…", "simplex": ""}}
```

**3. resolver resolves a live name** (`foobar.testing` is a populated test name):
```sh
curl -s http://127.0.0.1:8000/resolve/foobar.testing | jq
# → {"name":"foobar.testing","nickname":"Foo","simplexContact":["https://smp16.simplex.im/a#…"], … }
```

**4. the route your router will call** (check 3 passes on an older resolver too):
```sh
curl -s http://127.0.0.1:8000/v2/resolve/foobar.testing | jq
# → {"type":"registered","expires":1780000000,"graceUntil":…,"nameRecord":{…}}
```

**Wire your smp-server:** in its `[NAMES]` section set
`resolver_endpoint: http://127.0.0.1:8000` (no auth needed for loopback).

## Ports (all loopback unless noted)

| Service | Host | Purpose |
|---|---|---|
| reth JSON-RPC | `127.0.0.1:8545` | smp-server RPC |
| reth p2p | `:30303` tcp/udp | Ethereum sync (open on firewall) |
| nimbus p2p | `:9000` tcp/udp | beacon sync (open on firewall) |
| nimbus REST | `127.0.0.1:5052` | beacon API |
| **resolver** | `127.0.0.1:8000` | SNRC REST (`/v2/resolve`, `/resolve`, `/health`) |

## Caveats

- **All images track `:latest`** (reth, nimbus) — you get upstream fixes on each
  `docker compose pull`; re-run the verify checks after pulling.
- All ports bind to loopback; expose only what you put behind a TLS reverse proxy.

## Teardown

```sh
docker compose down       # stop, keep all state
docker compose down -v    # also wipe volumes → full re-sync
```

`down -v` wipes the chain data (full re-sync on the next `up`).

---

## Resolver API reference

The resolver (`snrc-resolve.py`, host `127.0.0.1:8000`) is also runnable
standalone for local dev (no Docker), via [`uv`](https://docs.astral.sh/uv/):

```sh
uv run scripts/resolver/service/snrc-resolve.py  # defaults to local reth + mainnet .testing
```

Three routes, versioned separately from the protocol so each only changes when
its own shape does:

| Route | Called by | Answers |
|---|---|---|
| `/v2/resolve/<query>` | routers from SMP v22 | a `NameRegistration` |
| `/resolve/<name>` | routers before SMP v22 | a name record, flat |
| `/health` | anyone | readiness |

`/v1/resolve/<name>` is an alias for `/resolve/<name>`.

### v2: `/v2/resolve/<query>`

The body is the SMP protocol's `NameRegistration`, which the router decodes as
is and forwards; translating the registry's model to it is this resolver's job.
Its `type` is `registered`, `available` or `reserved`, and the fields each one
carries are specified once, in the **Name response** section of
[`protocol/simplex-messaging.md`](../../protocol/simplex-messaging.md). It is
the wire format, so it is documented with the wire.

Two things follow from that and are worth stating here. Expiry and grace belong
to the registration, not to the record: `expires` and `graceUntil` sit beside
`nameRecord`, not inside it. And a name nobody holds is not an error: it
answers 200 with `type: available` and its price, so no status code from this
route means "not registered".

| Status | Meaning |
|---|---|
| 200 | a registration: `registered`, `available` or `reserved` |
| 400 | `tldNotConfigured`, `notFullyQualified` |
| 502 | `noPriceOracle`, `labelNotRecorded`, an unreadable status, or `upstreamError` |

Error bodies carry `name` and a fixed `error` code to branch on. Only
`upstreamError` adds a `message`; the v1 route always adds one.

`labelNotRecorded` means the registrar holds the name but never recorded its
label, so a hashed query cannot be answered with a name. See
[Querying by labelhash](#querying-by-labelhash).

### v1: `/resolve/<name>`

What routers before SMP v22 call. Its shape is unrelated to v2's: the record is
flat, and `status`, `expires`, `graceEnds`, `reasonCode` and `reason` sit
alongside its fields.

#### v1 response shape

```jsonc
{
  "name": "foobar.testing",
  "nickname": "Foo", "website": "https://foo.bar", "location": "",
  "simplexContact": ["https://smp16.simplex.im/a#…", "https://smp11…"],  // primary first, fallbacks after
  "simplexChannel": [],
  "eth": null, "btc": "bc1q…", "xmr": "4ANz…", "dot": "139G…",
  "owner": "0xd83b…", "resolver": "0x80fa…",
  "status": "registered",      // registered | grace | expired | unregistered | unknown
  "expires": 1780000000,       // Unix seconds; when the registration ends
  "graceEnds": 1787776000,     // expires + GRACE_PERIOD; last moment the owner can renew
  "reasonCode": null,          // set when the name is held back as well
  "reason": null               // set when the name is held back as well
}
```

`simplexContact`/`simplexChannel` are arrays (a name can advertise multiple SMP
servers; clients try them in order). On-chain they're a single `;`-separated
text record; the resolver splits/trims/drops-empties. Address encodings are
canonical per chain (EIP-55 / bech32 / SS58 / Monero-base58). Subnames work
identically (`bar.foobar.testing`).

#### v1 registration status and expiry

A response carries `status`, `expires` and `graceEnds` whenever the resolver
read them, a successful resolve included, so a client that has just resolved a
name already knows when it expires. Both timestamps are Unix seconds, and
`null` when they could not be read.

| `status` | Meaning |
|---|---|
| `registered` | live; `expires` is when that ends |
| `grace` | lapsed, but only the previous owner may renew it, until `graceEnds` |
| `expired` | lapsed and past grace; anyone may register it |
| `unregistered` | never registered, and free to take |
| `unknown` | no `SNRC_REGISTRAR_<TLD>` configured, so status could not be read |

A reservation is orthogonal to the status: a name held back by the registry
carries `reasonCode` and `reason` whether or not it is registered.

`grace` and `expired` are told apart by the registrar's own `available(id)`
rule, `expires + GRACE_PERIOD < now`. `GRACE_PERIOD` is read from the contract
rather than assumed, and `now` is the latest block's timestamp rather than the
host clock, which the registrar compares against too, so a machine with a wrong
clock cannot misreport a registration. That rule alone is not enough: it also
holds for a name nobody ever registered (`0 + GRACE_PERIOD < now`), so a zero
expiry is what separates *never registered* from *registered and since
released*.

A subname reports the status of the 2LD above it, which is only as good as the
name it sits under.

#### v1 errors

Every non-2xx body carries two fields: `error` is a fixed code to branch on,
and `message` is a sentence for a human. Match on `error`, never on `message`,
which is free to change.

```jsonc
{"name": "nope.testing", "error": "unregistered",
 "message": "this name has never been registered",
 "status": "unregistered", "expires": null, "graceEnds": null}
```

The codes are `tldNotConfigured`, `notFullyQualified`, `unregistered`,
`expired`, `noSuchRoute` and `upstreamError`. When the registration is what went
wrong, `error` and `status` hold the same value, so one field is enough to read.

`upstreamError` says only which exception type the RPC call raised. The text
goes to the resolver's log instead, because `SNRC_RPC` can carry a provider key
and urlopen puts the URL it failed on into the message. It is also the answer
when a registrar, controller or oracle address has no contract behind it: the
empty reply is refused rather than read as zero, which would make every name
look free.

#### v1 status codes

| Status | Meaning |
|---|---|
| 200 | resolved (`status` is `registered` or `grace`, or `unknown` when no registrar is configured) |
| 400 | TLD not configured, or not a fully-qualified name |
| 404 | `unregistered` |
| 410 | `expired`: lapsed and past grace, so anyone may take it |
| 502 | upstream RPC error / reth not synced |

### Querying by labelhash

A client asking whether a name is free is usually about to register it, and
whoever runs the resolver could register it first. To avoid that, send the
keccak hash of the label in ENS's `[<64 hex>]` form instead of the label:

```sh
# instead of /resolve/acme.testing
curl -s "http://127.0.0.1:8000/resolve/[$(printf acme | keccak-256sum | cut -d' ' -f1)].testing"
```

namehash is `keccak(parent || keccak(label))`, so this reaches the same node and
returns the same record. The registrar keys `nameExpires` and `reservedNames` on
the labelhash too, so the status fields do not need the label either. The
resolver learns the name only by guessing the label and hashing it.

Only the second-level label is a registry key, and `status` decodes a bracket
there at any depth. The record does not: a bracket is decoded only in a
two-label name, so `sub.[<hash>].testing` is not a supported query. Subname
labels stay text; a bracket label left of the 2LD is an ordinary label. Routers
from v22 send every 2LD this way, so a registrable name normally never reaches
this service.

On v2, read `type`: only `available` means the name is free. On v1, read
`status`: a name is free on `unregistered` (404) and on `expired` (410), every
other status means somebody holds it, and a `reasonCode` means the registry will
refuse it whatever the status says.

The hash must be keccak-256. `openssl dgst -sha3-256` and `sha3sum` compute
SHA3-256, a different function that returns 64 valid-looking hex characters
pointing at the wrong node.

The resolver lowercases the query before matching, so uppercase hex works too.
Clients that refuse raw brackets in a path can percent-encode them as `%5B` and
`%5D`.

Brackets cannot collide with a real name: they are invalid in a normalised ENS
name, and a `[<64 hex>]` label is 66 bytes against the registrar's
`maxLabelLength` of 63. A plain `0x…` label is not treated as a hash, since that
is an ordinary, registrable name.

Only 2LDs can be queried this way, as only a 2LD can be raced for: subnames are
created by the 2LD's owner. A bracket label in a subname is hashed as written,
so it points at a node nobody can own. ENS tooling accepts the bracketed form at
any depth; this resolver does not, on purpose.

This hides interest in a name and nothing else: the registration itself is
public, and commit-reveal covers that step. A short or well-known label is easy
to guess by hashing candidates, and the reveal publishes the labelhash, so an
operator who logged the query can match it to the name afterwards.

### What a name costs

The controller's `prices()` names the price oracle, so no extra configuration is
needed beyond `SNRC_CONTROLLER_<TLD>`. A `SimplexPriceOracle` exposes its curve
through `prices()`, in US cents per year, which is the unit this API carries.

An ENS-shaped oracle exposes only `price1Letter()`..`price6Letter()`, in attoUSD
per second, and charges a premium on a lapsed name that it does not expose. A
quote from one is therefore only safe for a name that was never registered: an
`expired` name gets no price rather than one below what the registrar charges.

The grace period, the oracle and its curve are cached for `CONSTANTS_TTL`
(5 minutes), so a retune shows up within that. Per-name values are read on
every query.

**Set `SNRC_CONTROLLER_<TLD>` wherever `SNRC_REGISTRAR_<TLD>` is.** Without a
controller there is no oracle, so no name can be priced.

**Upgrade this service before the routers that query it.** Routers from SMP v22
call `/v2/resolve`, which an older resolver does not serve. Every name then
answers `ERR NAME RESOLVER "HTTP 404"` until this service is upgraded, while
`/health` still reports it as ready.

### Why a name is reserved

v2 carries the controller's reason as `reservedReason`. v1 carries the same word
as `reasonCode`, plus `reason`, an English sentence for a human reading this API.
Clients should branch on the word and phrase it themselves, in the user's
language.

| `reasonCode` | Meaning |
|---|---|
| `internal` | reserved for SimpleX |
| `trademark` | reserved to protect a trademark |
| `community` | reserved for the community |
| `unknown` | a reason added to the contract after this resolver; still reserved |

These are `SimplexController.Reason`, where 0 means not reserved. A controller
from before the enum stores a boolean, whose `true` decodes as 1, which is why
1 reads as `internal`, so nothing needs migrating.

### Configuring addresses

The resolver reads three contracts, each configured per TLD.

The **registry** answers who owns a node, and `/resolve` reads the records from
it. The **registrar** (ERC-721) holds `nameExpires` and `GRACE_PERIOD`, which
is where every expiry field comes from, and `labelOf`, which is how a hashed
query is answered with a name. A name registered without recording its label
cannot answer one, and `/v2/resolve` refuses it rather than answer with a name
the client will reject. With no registrar for a TLD, `/resolve` still works and
reports `"status": "unknown"`. The **controller** holds
`reservedNames`, which is where `reasonCode` comes from. With no controller a
held-back name reads as not reserved, and no name can be priced.

All three default to the mainnet `.testing` deployment. `.simplex` is unset
until it is deployed.

The controller default is the **proxy**, not `SimplexControllerImpl`. Storage
lives in the proxy, so the implementation address answers nothing. The two
deployment files use different names for that proxy:
`deployments.mainnet.testing.json` records it under the ENS role name
`ETHRegistrarController`, and `verification.mainnet.testing.json` calls it
`SimplexControllerProxy`. Both are the same address, and it is the one used
here.

To override any of them, set `SNRC_REGISTRY_<TLD>`, `SNRC_REGISTRAR_<TLD>` or
`SNRC_CONTROLLER_<TLD>` on the `resolver` service in `docker-compose.yml`, or
as env vars when you run the script directly.