* fix(tdeck): improve display startup and brightness handling
* fix(energy-sweep): use instant RSSI and only lock LoRa while scanning
* feat(cardputer-zero): add linux shells and M5 SDK baseline
* feat(cardputer-zero): add linux runtime baseline and shell ui simulator
* feat(cardputer-zero): unify linux shell boot and polish simulator
* docs(cardputer-zero): define final-shape adaptation spec
* feat(cardputer-zero): integrate shared linux runtimes and pages
* fix(linux-sim): mount repo root in dev container
* Fix GPS runtime semantics and transport init
Add a GPS specification and align platform runtimes around explicit GPS enable, power, receiver configuration, and external NMEA export semantics.
Keep internal NMEA parsing independent from external export settings, stop treating gps_mode as an enable flag, and update phone/UI config paths to use gps_enabled.
Decouple board-level GPS transport readiness from UBX receiver probing on T-Deck, T-Deck Pro, and T-LoRa Pager, and let boards own UART teardown.
Verified with pio run -e tdeck, pio run -e tlora_pager_sx1262, pio run -e gat562_mesh_evb_pro, and pio run -e tdeck_pro_a7682e.
* Add Russian localization pack
Add an installable European Cyrillic Extended locale bundle with Russian translations, Cyrillic font metadata, and package catalog entry.
Credit polarikus for the Russian translations based on the polarikus/trail-mate localization PR.
* Prepare 0.1.23-alpha release
* Fix T-Watch Morse release build
* Format CI-checked sources
* Fix Cardputer Linux CI dependencies
* Fix WSL validation smoke target build
* Prepare 0.1.24-alpha release
* fix: unblock Cardputer Zero Linux CI
* feat(ui): add runtime English and Chinese localization
* fix(meshtastic): harden t-deck send and ack recovery
Align the T-Deck SX1262 setup with the reference firmware, switch critical radio SPI paths to blocking access, and share RX restart state between direct send paths and the radio task so TX-to-RX handoff cannot silently get stuck.
Also unify Meshtastic wire transmission through a single helper, keep wire packets for ACK-tracked sends, retry ACK timeouts up to three times, and document the issue #21 repair checklist.
Validation: local builds passed for tdeck, tlora_pager_sx1262, lilygo_twatch_s3, and gat562_mesh_evb_pro; clang-format check passed.
Testing status: not fully tested on hardware yet.
* Refactor LXMF runtime toward full Reticulum alignment
Split adapter runtime state into transport, link, and propagation domains.
Add pending path request tracking, stronger link teardown semantics, outbound link establishment, deferred link payload flushing, link keepalive/stale handling, and inbound split-resource assembly.
Document the authoritative Reticulum/LXMF runtime alignment plan and mark the older device-mode plan as historical context.
* feat(web): add pages site and web flasher release flow
Bundle the current workspace changes into a single checkpoint covering the in-progress shared UI, settings, and GAT562 runtime work.
What this includes:
- add the APRS asset source and image resource currently used by the shared UI asset set
- extend the shared System/settings flow so vibration and screen brightness can be surfaced through the device runtime and settings UI plumbing
- update the mono 128x64 runtime and the GAT562 platform bindings so the new settings controls are available in the GAT562 experience
- wire the ESP runtime/startup helpers needed to support the same device-runtime settings path on the ESP side
- persist the GAT562 self GPS position into the node store during core service updates so a device that already obtained a fix can retain its own last known position across reboot
- add an explicit node-store flush interface and implement it in both the nRF52 and ESP Meshtastic node-store backends so critical self-position updates can be forced to persistent storage immediately instead of waiting for the normal debounce window
- keep the existing debounced persistence behavior for ordinary node-store churn while allowing targeted immediate flushes for data that would otherwise be easy to lose during restart or power loss
- migrate ESP board-specific implementations and runtime adapters into boards/*
- continue GAT562/Tab5/UI runtime alignment across app and board layers
- sync BLE and runtime integrations, and apply repository clang-format rules
Trail Mate Dev