wadamesh/platformio.ini

; wadamesh — Heltec V4 TFT touch firmware.
; Standalone PlatformIO project: the MeshCore core is consumed as a library
; (lib/MeshCore here; a git-tagged fork once published). This env is the flattened
; equivalent of meshcomod's heltec_v4_tft_companion_radio_usb_tcp_touch.

[platformio]
default_envs =
  heltec_v4_tft_companion_radio_usb_tcp_touch
  LilyGo_TDeck_companion_radio_touch
  ThinkNode_M9_companion_radio_touch

[env:heltec_v4_tft_companion_radio_usb_tcp_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = heltec_v4
monitor_speed = 115200
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py

build_flags =
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  ; NOTE: tried -D ARDUINO_USB_MODE=1 (HW-CDC, drops unused TinyUSB MSC/DFU ≈ 12 KB internal
  ; DRAM) — but on the real V4 the binary companion link regressed: small per-message frames
  ; arrived yet the larger device-profile frame (node name + keys) dropped bytes over HW-CDC's
  ; smaller TX FIFO. Reverted to the board JSON's TinyUSB CDC. Revisit only with an HW-CDC TX
  ; buffer/DTR-wait fix verified on hardware. (T-Deck ships MODE=1 and is fine — board-specific.)
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  ; --- sensors ---
  -D ENV_INCLUDE_GPS=1
  -D ENV_INCLUDE_AHTX0=1
  -D ENV_INCLUDE_BME280=1
  -D ENV_INCLUDE_BMP280=1
  -D ENV_INCLUDE_SHTC3=1
  -D ENV_INCLUDE_SHT4X=1
  -D ENV_INCLUDE_LPS22HB=1
  -D ENV_INCLUDE_INA3221=1
  -D ENV_INCLUDE_INA219=1
  -D ENV_INCLUDE_INA226=1
  -D ENV_INCLUDE_INA260=1
  -D ENV_INCLUDE_MLX90614=1
  -D ENV_INCLUDE_VL53L0X=1
  -D ENV_INCLUDE_BME680=1
  -D ENV_INCLUDE_BMP085=1
  ; --- Heltec LoRa32 V4 board ---
  -I variants/heltec_v4
  -D HELTEC_LORA_V4
  -D USE_SX1262
  -D ESP32_CPU_FREQ=80
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D P_LORA_TX_LED=35
  -D P_LORA_DIO_1=14
  -D P_LORA_NSS=8
  -D P_LORA_RESET=12
  -D P_LORA_BUSY=13
  -D P_LORA_SCLK=9
  -D P_LORA_MISO=11
  -D P_LORA_MOSI=10
  -D P_LORA_PA_POWER=7
  -D P_LORA_PA_EN=2
  -D P_LORA_PA_TX_EN=46
  -D P_LORA_GC1109_PA_EN=2
  -D P_LORA_GC1109_PA_TX_EN=46
  -D P_LORA_KCT8103L_PA_CSD=2
  -D P_LORA_KCT8103L_PA_CTX=5
  -D PIN_USER_BTN=0
  -D PIN_VEXT_EN=36
  -D PIN_VEXT_EN_ACTIVE=HIGH
  -D LORA_TX_POWER=10
  -D MAX_LORA_TX_POWER=22
  -D SX126X_REGISTER_PATCH=1
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D PIN_GPS_RX=38
  -D PIN_GPS_TX=39
  -D PIN_GPS_RESET=42
  -D PIN_GPS_RESET_ACTIVE=LOW
  -D PIN_GPS_EN=34
  -D PIN_GPS_EN_ACTIVE=LOW
  -D PIN_ADC_CTRL=37
  -D PIN_VBAT_READ=1
  ; --- TFT ---
  -D HELTEC_LORA_V4_TFT
  -D PIN_BOARD_SDA=4
  -D PIN_BOARD_SCL=3
  -D DISPLAY_ROTATION=2
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D PIN_TFT_RST=18
  -D PIN_TFT_VDD_CTL=-1
  -D PIN_TFT_LEDA_CTL=21
  -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
  -D PIN_TFT_CS=15
  -D PIN_TFT_DC=16
  -D PIN_TFT_SCL=17
  -D PIN_TFT_SDA=33
  ; --- CHSC6x cap touch ---
  -D HAS_HELTEC_V4_CAP_TOUCH=1
  -D PIN_TOUCH_SDA=47
  -D PIN_TOUCH_SCL=48
  -D PIN_TOUCH_RST=44
  -D HELTEC_V4_BUZZER_PIN=6
  ; --- touch UI / companion stack ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  ; Heltec V4 Expansion Kit: local environment sensors UI (Sensors tab, Home env
  ; widget, Local-Sensors page). Board-gated — only this env compiles it.
  -D HAS_EXPANSION_KIT=1
  -D FIRMWARE_OTA_ENV='"heltec_v4_tft_companion_radio_usb_tcp_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  ; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
  ; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D USER_SETUP_LOADED=1
  -D ST7789_DRIVER=1
  -D TFT_WIDTH=240
  -D TFT_HEIGHT=320
  -D TFT_MOSI=33
  -D TFT_SCLK=17
  -D TFT_CS=15
  -D TFT_DC=16
  -D TFT_RST=18
  -D TFT_MISO=-1
  -D SPI_FREQUENCY=80000000
  -D TFT_RGB_ORDER=TFT_RGB
  -D TFT_INVERSION_ON=1
  -D TFT_BL=21
  -D TFT_BACKLIGHT_ON=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7789LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/heltec_v4/*.cpp>

lib_deps =
  ; MeshCore core = the meshcomod monorepo built as a lib, pinned by tag.
  ; Touch-app files (TouchPrefsStore, WifiRuntimeStore, transports, ...) are
  ; vendored in this app's src/ and dropped from the lib via -DMC_VENDORED_TOUCH_APP.
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  bodmer/TFT_eSPI @ ^2.5.43
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; LilyGo T-Deck / T-Deck Plus — flattened equivalent of meshcomod's
; LilyGo_TDeck_companion_radio_touch. ST7789 via Adafruit (not TFT_eSPI);
; GT911 touch + matrix keyboard + trackball; sensors off except GPS.
; ======================================================================
[env:LilyGo_TDeck_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck
monitor_speed = 115200
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/inject_wifi_env.py, merge-bin.py

build_flags =
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  ; --- T-Deck board ---
  -I variants/lilygo_tdeck
  -D LILYGO_TDECK
  -D BOARD_HAS_PSRAM=1
  ; 0 = silence ARDUHAL [E] spam (benign vfs_api cache-miss "no permits for
  ; creation" + Preferences nvs_open NOT_FOUND on first-namespace-access) that
  ; also pollutes the USB-CDC companion stream. Our own Serial.printf logs stay.
  -D CORE_DEBUG_LEVEL=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D PIN_USER_BTN=0
  -D PIN_PERF_POWERON=10
  -D USE_SX1262
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  ; The T-Deck's SX1262 antenna (TX/RX) switch is driven by DIO2 — this MUST be
  ; true. With it false, setDio2AsRfSwitch(false) leaves the switch uncontrolled,
  ; so on TX the +22 dBm PA is never routed to the antenna (~16 dB loss -> ~4 mW).
  ; That was issue #6. (Meshtastic's T-Deck + the Heltec V4 here + every other
  ; MeshCore SX1262 variant use true; the T-Deck was the lone outlier.)
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8f
  -D P_LORA_DIO_1=45
  -D P_LORA_NSS=9
  -D P_LORA_RESET=17
  -D P_LORA_BUSY=13
  -D P_LORA_SCLK=40
  -D P_LORA_MISO=38
  -D P_LORA_MOSI=41
  -D ENV_INCLUDE_GPS=1
  -D ENV_SKIP_GPS_DETECT=1
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D PIN_TFT_RST=-1
  -D PIN_TFT_VDD_CTL=-1
  -D PIN_TFT_LEDA_CTL=42
  -D PIN_TFT_CS=12
  -D PIN_TFT_DC=11
  -D PIN_TFT_SCL=40
  -D PIN_TFT_SDA=41
  -D PIN_GPS_RX=43
  -D PIN_GPS_TX=44
  -D GPS_BAUD_RATE=38400
  ; --- touch UI / companion stack ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"LilyGo_TDeck_companion_radio_touch"'
  -D HAS_TDECK_GT911=1
  -D HAS_TDECK_TRACKBALL=1
  -D HAS_TDECK_KEYBOARD=1
  -D ENABLE_ADVERT_ON_BOOT=0
  -D PIN_TB_UP=15
  -D PIN_TB_DOWN=3
  -D PIN_TB_LEFT=2
  -D PIN_TB_RIGHT=1
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  ; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
  ; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7789LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/lilygo_tdeck/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; Elecrow ThinkNode M9 — ESP32-S3R8 / LR1110 / 2.4" 240x320 ST7789 / QWERTY
; keyboard + d-pad (no touchscreen). Pin map verified against the V1.0
; schematic + Meshtastic boot log during Specter (ESP-IDF) bring-up; the
; panel IC, TCXO voltage, battery divider, and LR1110 RF-switch DIO mapping
; below are all schematic/manufacturer-confirmed (NOT the earlier ILI9341 /
; 2:1-divider / unverified-RF-switch state from a prior attempt). See
; variants/thinknode_m9/M9_PORT.md for the full pin table and the remaining
; hardware-verify checklist (GPS EN polarity/baud, display rotation, RF-switch
; truth-table polarity, SD mount-timing margins) — those items are
; deliberately left unset/unconfirmed below.
; ======================================================================
[env:ThinkNode_M9_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = thinknode_m9
monitor_speed = 115200
board_build.partitions = variants/thinknode_m9/partitions_m9_touch.csv
; patch_radiolib_lr11x0: preprod M9 LR1110s run old transceiver FW that rejects
; DriveDiosInSleepMode (0x012A, FW 0x0308+) with CMD_PERR -> begin() = -706.
; The pre-script makes RadioLib's config() skip it on old FW (idempotent,
; per-env libdeps copy). See scripts/build/patch_radiolib_lr11x0.py.
extra_scripts = pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_radiolib_lr11x0.py, merge-bin.py

build_flags =
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  ; --- ThinkNode M9 board ---
  -I variants/thinknode_m9
  -D HAS_THINKNODE_M9
  -D BOARD_HAS_PSRAM=1
  ; M9 uses the UART bridge (ttyUSB0), not native USB-CDC — confirmed during
  ; Specter bring-up. With ARDUINO_USB_CDC_ON_BOOT=1 (the T-Deck's setting)
  ; app Serial logs go to a ttyACM* port this board doesn't expose and
  ; appear completely silent.
  -D ARDUINO_USB_CDC_ON_BOOT=0
  -D PIN_USER_BTN=0
  -D RADIO_CLASS=CustomLR1110
  -D WRAPPER_CLASS=CustomLR1110Wrapper
  -D LORA_TX_POWER=22
  ; LR1110 clock: TCXO mode at 3.3 V — EMPIRICALLY CONFIRMED on the tester's
  ; preproduction unit: Meshtastic's thinknode_m9 variant logs "using DIO3 as
  ; TCXO reference voltage at 3.300000 V" followed by "LR1110 init result 0".
  ; The earlier theory here (Y1 = self-powered active oscillator -> tcxo must
  ; be 0) was disproven on hardware: with 0 the chip boots on its internal RC
  ; (SPI alive, no -2) but the first command needing the real 32 MHz clock is
  ; rejected -> radio init failed -707 (bring-up build #1, 2026-07-06). The
  ; schematic's "VTCXO rail" feeding Y1 is evidently the LR1110's own
  ; TCXO-supply output, so the chip must drive it.
  -D LR11X0_DIO3_TCXO_VOLTAGE=3.3
  ; Bring-up only: RadioLib's own boot prints (found-chip line with the
  ; transceiver/WiFi/GNSS FW versions, calibration errors). Goes to Serial =
  ; UART0 on this board. Low volume; drop once the radio is proven.
  -D RADIOLIB_DEBUG_BASIC=1
  -D RX_BOOSTED_GAIN=true
  ; DIO5/DIO6 -> RFSW0_V1/RFSW1_V2 confirmed against the V1.0 schematic (LR1110
  ; block, U7 pins 19/20 -> R19/R20 -> U8 V1/V2) — see target.cpp for the table
  ; and M9_PORT.md for the crop. The per-mode polarity is the conventional
  ; 2-pin table every other MeshCore LR1110 board uses, not independently
  ; re-derived from U8's datasheet (part number isn't printed on the schematic).
  -D RF_SWITCH_TABLE
  ; --- LR1110 SPI / control pins (verified: V1.0 schematic + boot log) ---
  -D P_LORA_NSS=39
  -D P_LORA_DIO_1=42
  -D P_LORA_RESET=45
  -D P_LORA_BUSY=41
  -D P_LORA_SCLK=40
  -D P_LORA_MISO=38
  -D P_LORA_MOSI=47
  ; --- Peripheral I2C bus 0 (Wire): RTC PCF8563 0x51 / IMU QMI8658 0x6b /
  ;     compass QMC6309 0x7c. Brought up by ESP32Board::begin(). ---
  -D PIN_BOARD_SDA=7
  -D PIN_BOARD_SCL=6
  ; --- Battery: 1:1 divider, manufacturer-confirmed (M9Board::getBattMilliVolts()
  ;     overrides the ESP32Board base class's hardcoded 2:1 assumption). ---
  -D PIN_VBAT_READ=13
  ; --- GPS (CC1167Q, UART1) ---
  -D ENV_INCLUDE_GPS=1
  -D PIN_GPS_RX=2
  -D PIN_GPS_TX=3
  -D PIN_GPS_EN=11
  -D PIN_GPS_RESET=5
  ; GPS_BAUD_RATE / PIN_GPS_EN_ACTIVE intentionally left at library defaults
  ; (9600 / HIGH) — UNVERIFIED for this module, see M9_PORT.md.
  ; GPIO10 (GPS ON_OFF) and GPIO4 (1PPS) exist on the schematic but have no
  ; consumer in this driver yet — reserved, not wired.
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  ; --- ST7789 panel (manufacturer-confirmed; NOT ILI9341) ---
  ; No LILYGO_TDECK / HELTEC_LORA_V4_TFT macro is defined, so ST7789LCDDisplay
  ; uses its default branch (Adafruit_ST7789 over the global `SPI`, the same
  ; instance the radio uses) — matches the LR1110 reference variants, which
  ; also share one SPI peripheral across radio + display + (on the M9) SD.
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  ; HARDWARE-VERIFIED (bring-up #6, 2026-07-06): rotation 3 rendered the UI
  ; 180 degrees off on the tester's unit; 1 is the correct landscape
  ; orientation (keyboard below screen). Adafruit rotations 1/3 are the two
  ; landscape options, 180 degrees apart.
  -D DISPLAY_ROTATION=1
  ; PIN_TFT_LEDA_CTL is set to -1, NOT left undefined: the installed ST7789LCDDisplay
  ; references it unconditionally (`if (PIN_TFT_LEDA_CTL != -1)`, no #ifdef guard around
  ; the macro itself — leaving it undefined is a compile error, not a no-op). -1 makes
  ; that check skip the pin entirely, since the vendored class always drives it
  ; active-HIGH, but the M9's backlight is a PNP transistor (active-LOW) — so
  ; ThinkNodeM9Board owns BL_EN (GPIO17) directly instead (see M9Board.h/.cpp).
  ; PIN_PERIPH_POWER is the OTHER (also active-low) rail, gating the LCD/GPS/sensors,
  ; and IS passed through ST7789LCDDisplay's RefCountedDigitalPin constructor arg in
  ; target.cpp.
  -D PIN_TFT_LEDA_CTL=-1
  -D PIN_PERIPH_POWER=18
  -D PIN_TFT_BL_EN=17
  -D PIN_TFT_RST=14
  -D PIN_TFT_DC=15
  -D PIN_TFT_CS=16
  ; PIN_TFT_SCL / PIN_TFT_SDA intentionally NOT defined: only the
  ; USE_PIN_TFT / LILYGO_TDECK / HELTEC_LORA_V4_TFT branches of
  ; ST7789LCDDisplay's constructor consume them, and M9 uses none of those —
  ; it takes the default `display(&SPI, PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_RST)`
  ; branch (global SPI, same instance the radio uses).
  ;
  ; NOTE: a software-SPI (USE_PIN_TFT) diagnostic build was tried here to test
  ; whether the class's hardcoded 80MHz hardware SPI clock was corrupting the
  ; boot-splash write. It wasn't — software SPI reproduced the EXACT same
  ; freeze-then-TG1WDT_SYS_RST at the exact same point, just slower, which
  ; rules out the SPI clock/signal-integrity theory entirely. See
  ; M9_PORT.md / git history if revisiting that path.
  ; microSD: on SD_MMC per the Meshtastic boot log (SDMMC peripheral, no SPI
  ; CS). The earlier "CS=36" reading is an octal-PSRAM-reserved pin (GPIO35-37,
  ; S3R8) — never drive it. SD support deferred until the SDMMC pins are known.
  ; --- Keyboard controller (own bus, Wire1) — full QWERTY + d-pad + function
  ;     keys, all over one I2C device. See M9Keyboard.h for the confirmed
  ;     keycode table. ---
  -D HAS_M9_KEYBOARD=1
  ; Keyboard bus SCHEMATIC-VERIFIED (V1.0 sheet, bring-up #9): S3 GPIO20 =
  ; net ESP32-2_SDA, GPIO21 = ESP32-2_SCL, to the keyboard ESP32-S2 (its
  ; GPIO7/6) through R2/R1 series resistors, pullups R73/R72, S2 powered from
  ; always-on 3V3 via R3. GPIO19/20 are also the S3's native USB D-/D+ pads —
  ; M9Board::begin() must release the USB-Serial-JTAG pad claim first.
  -D PIN_KB_SDA=20
  -D PIN_KB_SCL=21
  -D PIN_KB_ADDR=0x6c
  ; --- touch UI / companion stack (M9 has no touch — keyboard + d-pad text
  ;     entry only; keypad-nav focus traversal is NOT wired yet, see
  ;     M9_PORT.md) ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"ThinkNode_M9_companion_radio_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7789LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/thinknode_m9/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.16.5
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0