mirror of
https://github.com/ALLFATHER-BV/wadamesh.git
synced 2026-09-25 19:54:58 +00:00
Kaj SchittecatandClaude Opus 5
e374031056
oumike. ESP32-S3, 16 MB flash, 8 MB octal PSRAM, quad-SPI 320x240 panel via LovyanGFX, GT911 touch, SX1262 at 22 dBm, GPS, microSD on SD_MMC. New board file, new variant, one new env. Seeed start selling it next week and the maintainers have the hardware; we do not. Merged on their hardware bring-up rather than ours: display, touch, GPS, microSD, battery and buttons are confirmed on-device by the author. What this side can prove is that it does not cost anyone else anything, so the whole matrix was built: all nine S3 envs including the new one, plus both ESP32-P4 targets. The PR also carries accumulated touch-UI work from the author's development line, which he flagged himself and offered to split out. Merged as-is because the three-way merge came through with zero conflicts and nothing from today was reverted: the prefs schema is still v54, and kb_force_legacy, boot_wifi_open, the P4 gpsEnsureBigRxRing fallback and the chat-store migration logging are all still present. Verified explicitly rather than assumed, since the diff against main showed 1706 deletions purely because the branch predates today's merges. Two bring-up findings worth keeping: Arduino's Serial1.setPins() takes (rx, tx), so PIN_GPS_TX is the pin we receive on -- the same naming trap the V4-R8 and Pager envs already carry, and it left this board's GPS listening on a silent pin. And the panel is fixed landscape (CAP_ROTATABLE 0), so the keyboard's rotate arrows are not built there. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
6.2 KiB
6.2 KiB
Supported devices
Current hardware support, install paths and maturity. "Stable" means the board ships on the stable release channel; "Beta" means it is new and lives on the test channel until the next stable promote. Install links: flasher.wadamesh.com (browser, Chrome/Edge over USB) and the GitHub releases.
| Device | MCU / radio | Display and input | Install | Channel | Status |
|---|---|---|---|---|---|
| LilyGo T-Deck / T-Deck Plus | ESP32-S3, SX1262 | 2.8" 320x240 touch, QWERTY, trackball | Web flasher (standalone) or Launcher app image | Stable | Fully supported, reference device |
| Heltec V4 + TFT | ESP32-S3, SX1262 | 2.4" 240x320 touch (CHSC6x) | Web flasher | Stable | Fully supported; Expansion Kit sensors, V4.3 high-gain RX toggle |
| Tanmatsu | ESP32-P4 + ESP32-C6, SX1262 | 4" 800x480, 69-key keyboard (no touch) | Tanmatsu app store on the device (runs under the badge.team launcher, not web-flashable) | Store tracks the test channel | Fully supported; LoRa + Wi-Fi + Bluetooth simultaneously, standalone and companion in one |
| Elecrow ThinkNode M9 | ESP32-S3, LR1110 | 2.4" 240x320 (no touch), I2C QWERTY + d-pad | Web flasher | Beta (new in beta_38) | Hardware-complete community port by ded (#138): GPS, microSD, buzzer, lock screen, d-pad navigation |
| RAK WisMesh Tap V2 (RAK3312) | ESP32-S3, SX1262 | Touch display (LovyanGFX, 30+ fps) | Web flasher | Beta (new in beta_38) | Early community port by Ethac.chen (#136); core mesh, chat and map working |
| LilyGo T-Lora Pager | ESP32-S3, LR1121 or SX1262 | 2.33" IPS LCD, 480x222 (no touch), QWERTY + rotary encoder | Web flasher (pick the build matching your radio) | Beta (new in beta_45) | Fully supported; keyboard-first navigation, microSD, map tile packs |
| Heltec V4-R8 + Expansion Kit V2 | ESP32-S3 (8 MB octal PSRAM), SX1262 | 2.4" touch (CHSC6x) | Web flasher | Beta (new in beta_45) | As the V4 plus microSD and the Expansion Kit sensors; buzzer supported |
| LilyGo T-Display P4 | ESP32-P4 + ESP32-C6, SX1262 | AMOLED or TFT-LCD, touch | Web flasher (AMOLED) or the .bin for the LCD SKU | Beta (new in beta_45) | Two screen SKUs; fuel-gauge battery reporting, full TX power |
| Attaky Mesh Series | ESP32-S3, SX1262 | Touch display + front D-pad | Web flasher | Beta (new in beta_47) | Community port by attakygit (#158/#169); detachable keyboard supported; the front D-pad + SELECT navigate the UI |
Feature notes per board
- T-Deck: the everything device: touch, physical keyboard, trackball cursor or d-pad navigation, microSD (deep 5000-message chat history, map tile packs, data storage), GPS on the Plus, notification sounds through the I2S speaker. Because the board has no battery-backed clock, Clock settings can optionally use a saved Wi-Fi network once after a true cold boot to obtain the time, then return Wi-Fi to off. This is off by default; saved open networks require a second explicit opt-in and unknown networks are never joined. Tap Sym or Alt for one symbol, or double-tap either to lock the symbol layer; this needs LilyGO keyboard-controller firmware with raw matrix mode (June 2025 or newer). Older controller firmware keeps normal typing and reports the unavailable latch mode on Serial.
- Heltec V4 + TFT: touch UI with the on-screen keyboard; the optional Expansion Kit adds environment sensors (home-screen chart) and a piezo buzzer. V4.3 boards get the switchable high-gain receive LNA toggle.
- Tanmatsu: keyboard-driven UI (no touchscreen) with the coloured function keys mapped to tabs, ALT accent picker, UI scaling (Normal/Large/Huge), microSD for all persistent data. Ships through the Tanmatsu launcher store, updates arrive as store updates.
- T-Lora Pager: no touchscreen at all — the QWERTY keyboard and the rotary encoder drive everything (Alt+turn free-scrolls a page; see TLORA_PAGER_SHORTCUTS.md for the full key map). Tap Fn/Alt for one symbol or double-tap it to lock the symbol layer; physical hold combinations keep their existing behavior. GPS, microSD, keyboard backlight, lock screen and notification sound through the onboard codec and amp all work. Two builds, one per radio: LR1121 and SX1262 — flashing the wrong one leaves you with no radio, so check the label on your unit. The onboard PCF85063A keeps time through a full power-off and is synchronized automatically whenever the firmware accepts time from NTP, GPS, a companion, CLI, or mesh bootstrap. A card the Pager detects but cannot read shows up in File Manager greyed, and tapping it retries the mount; formatting is deliberately left to a computer (FAT32) rather than done on-device.
- ThinkNode M9: keyboard plus d-pad navigation (no touch), same feature set as the other boards where the hardware allows. Every key and mode is covered in the keyboard & d-pad guide. Its PCF8563 is validated at boot; if it reports lost integrity, the same optional saved-Wi-Fi cold-boot sync offered on T-Deck is available in Clock settings. New in beta_38; report anything that feels off.
- RAK WisMesh Tap V2: newest port, touch-driven. The browser-flash path is fresh; if the flasher cannot open the serial port, put the board in download mode manually and retry, and please report it.
- Seeed Wio Tracker L2: pre-release touch target under active bring-up. Builds are for development and hardware validation only; no public release artifact is promised until the port is verified.
Requested boards
Open hardware requests, roughly in demand order. Ports are welcome, see CONTRIBUTING.md; the M9 and Tap V2 both started as community PRs.
Channels
- Stable: the tested default. The flasher installs it unless you pick Beta.
- Beta: new features and fixes earlier; on-device opt-in via Settings, About, "Get test builds (beta)". New boards debut here and move to Stable with the next promote.