Kaj SchittecatandClaude Opus 5
ce37110515
- Web interface: unlock a manually locked screen (#506). The device publishes its lock state over the mirror socket and the page shows an Unlock button while it is set. The lock screen absorbs taps by design and only a held trackball or BOOT press unlocks on the device, so a browser had no way back from a screen it had locked itself. - Console mode: hold the panel for three seconds to leave it (#507). The banner and `help` both say so. Console mode also applies the "Older keyboard protocol" setting now: that is applied in the graphical startup path, which console mode returns before, so the console ran on protocol detection alone. On a T-Deck that needs the older protocol every keystroke there is garbage, which is why `ui` could not be typed and the reporter had to side-load a second firmware to get the device back. - Console mode: a touch wakes a dark panel again on the touch-only boards, where the keyboard and button wake paths sit below the console branch's return. The waking press is swallowed so it cannot also type. - Paste into a key field lifts the key out of the surrounding text (#526): a 32 hex digit channel secret or a 64 hex digit public key, spaced keys included. Before, the field filled with prose and the length cap cut the key off. - ThinkNode M9: a waiting firmware update is visible (#443). The red "!" over the bottom-bar gear is built in the #else of that board's block, so the M9 had no update signal at all; it gets a third slot in its own notice row, steady amber rather than blinking. The Settings tile in the app drawer carries an "!" on every board. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
wadamesh.com infrastructure
Distribution stack for wadamesh: a VPS nginx origin behind Cloudflare.
tiles.wadamesh.com →CF (HTTP, edge-cached) → nginx → OpenStreetMap / OpenTopoMap
firmware.wadamesh.com →CF (cache bins) → nginx → /srv/wadamesh/firmware
flasher.wadamesh.com →CF (HTTPS) → 301 → wadamesh.com
wadamesh.com →CF (HTTPS) → nginx → /srv/wadamesh/site
Map tile styles. The default /{z}/{x}/{y}.jpg route serves OpenStreetMap
(the firmware default). An opt-in OpenTopoMap topographic style is served from
/opentopo/{z}/{x}/{y}.jpg (explicit OSM alias at /osm/...); the device requests
it only when the user enables Map → Options → Topographic map. Legal: OpenTopoMap
map tiles are © OpenTopoMap (CC-BY-SA) over © OpenStreetMap contributors
(ODbL) + SRTM — the touch UI shows that attribution when topo is active, and the
14-day disk cache keeps each tile hitting OpenTopoMap at most once per fortnight
(their tile-usage policy asks for a contactable UA + caching, both of which the
transcode service provides). Deploying the topo routes = update
tiles.wadamesh.com.conf + tile-transcode.py, then
systemctl restart wadamesh-tile-transcode && nginx -t && systemctl reload nginx
and purge the Cloudflare cache for tiles.wadamesh.com/opentopo/*.
The firmware fetches tiles + the update-check over plain HTTP (on-device HTTPS isn't viable — mbedTLS needs ~30 KB heap, only ~5 KB is free post-Wi-Fi), so the tile + firmware hosts must stay reachable over HTTP. Cloudflare provides the edge cache, HTTPS for the flasher, and hides the origin IP (so no IP lives in this repo or the firmware).
1. VPS (origin)
sudo apt install nginx
sudo mkdir -p /srv/wadamesh/firmware/releases/TOUCH /var/cache/nginx/wadamesh-tiles
sudo cp deploy/nginx/tiles.wadamesh.com.conf /etc/nginx/sites-available/
sudo cp deploy/nginx/firmware.wadamesh.com.conf /etc/nginx/sites-available/
sudo ln -s /etc/nginx/sites-available/tiles.wadamesh.com.conf /etc/nginx/sites-enabled/
sudo ln -s /etc/nginx/sites-available/firmware.wadamesh.com.conf /etc/nginx/sites-enabled/
sudo nginx -t && sudo systemctl reload nginx
2. Cloudflare
- DNS:
A/AAAArecords fortiles,firmware,flasher,@→ the VPS IP, all Proxied (orange cloud). - SSL/TLS: mode Flexible (CF↔origin HTTP) is enough since the origin is
HTTP-only. Do NOT enable "Always Use HTTPS" on
tiles.orfirmware.— the firmware needs plain HTTP there. - Cache Rules:
tiles.wadamesh.com/*→ Eligible for cache, Edge TTL ~14d.firmware.wadamesh.com/releases/*/*.bin→ cache, Edge TTL ~1d.firmware.wadamesh.com/releases/TOUCH(the listing) → short TTL (~60s) or Bypass, so new releases appear promptly.
3. Publishing a release
From a wadamesh checkout (builds both boards, refreshes the listing, rsyncs up):
WADAMESH_VPS=user@your-vps scripts/release.sh beta_2
The on-device check GETs http://firmware.wadamesh.com/releases/TOUCH, finds the
highest beta_<N>, and (once OTA-over-Wi-Fi is re-enabled) pulls
…/releases/TOUCH/beta_<N>/<board>.bin.
Done
- Web flasher ✅ — the guided install page at
wadamesh.com, served fromdeploy/site/and published byscripts/deploy-site.sh(esp-web-tools / Web Serial, per-board install buttons + .bin downloads, manifests generated per release byscripts/build/gen-flasher-meta.pyinto the/latest/and/latest-beta/feeds thatrelease.shrefreshes each publish). flasher.wadamesh.com301-redirects to the apex (seedeploy/nginx/flasher.wadamesh.com.conf) — it is an alias, not its own page.deploy/flasher/is the original standalone flasher page. No deploy script publishes it —deploy-site.shshipsdeploy/site/only — so it is effectively an offline/local copy kept in parity by hand. Retire it or wire it into a deploy target; until then, treatdeploy/site/index.htmlas the only install page users can reach.
TODO before public launch
- Re-enable OTA-over-Wi-Fi in the firmware (currently it version-checks then defers to manual flashing).
- Flip
wadameshrepo public = launch. - Decide tile-proxy sharing: dedicated
tiles.wadamesh.com(this config) vs reusing the meshcomod proxy.
Never commit the VPS IP, SSH keys, or
WADAMESH_VPS. Cloudflare fronts the origin; the deploy target is supplied via the environment at publish time.