Christopher Van HooseandClaude Fable 5
9677dcfe19
beta_68 expanded the Lua SDK (map, lists, packet delivery, discovery, private messages/rooms, native crypto) across the same files as this branch, so four files conflicted. Nothing was dropped from either side: - wada.sys.gps(): both widenings merged into one binding. Upstream's fix_time / lat_e6 / lon_e6 and our speed_kmh / course now share a signature, and our stricter gate wins -- the call returns nil when the user has GPS switched off, not just when there is no fix. - Altitude is upstream's `alt_m` alone. The resolution first carried `alt` beside it to protect a shipped app, but gpscompass has never been published to the store (it exists only in this branch and on a bench device), so carrying a duplicate key into the API forever was the wrong trade: the app reads alt_m instead. - sysCaps() carries all twelve feature flags (upstream's seven, our compass, the four originals) with a matching table hint. - wada.geo (upstream) and wada.sys.compass (ours) both survive; upstream's "no board has a magnetometer" note is corrected in the code and on the SDK page, since the M9 now does. - hostTeardown frees upstream's new POST payload buffer as well as the fetch buffer, under the same in-flight guard. - The catalog keeps all three new apps: upstream's wardrive and nearby, ours gpscompass (8 total, every referenced file present). M9, V4, V4-R8, T-Deck and Pager all compile; the Lua host harness passes. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
wadamesh.com infrastructure
Distribution stack for wadamesh: a VPS nginx origin behind Cloudflare.
tiles.wadamesh.com →CF (HTTP, edge-cached) → nginx → OpenStreetMap / OpenTopoMap
firmware.wadamesh.com →CF (cache bins) → nginx → /srv/wadamesh/firmware
flasher.wadamesh.com →CF (HTTPS) → web flasher (TODO — see below)
wadamesh.com →CF (HTTPS) → landing page (later)
Map tile styles. The default /{z}/{x}/{y}.jpg route serves OpenStreetMap
(the firmware default). An opt-in OpenTopoMap topographic style is served from
/opentopo/{z}/{x}/{y}.jpg (explicit OSM alias at /osm/...); the device requests
it only when the user enables Map → Options → Topographic map. Legal: OpenTopoMap
map tiles are © OpenTopoMap (CC-BY-SA) over © OpenStreetMap contributors
(ODbL) + SRTM — the touch UI shows that attribution when topo is active, and the
14-day disk cache keeps each tile hitting OpenTopoMap at most once per fortnight
(their tile-usage policy asks for a contactable UA + caching, both of which the
transcode service provides). Deploying the topo routes = update
tiles.wadamesh.com.conf + tile-transcode.py, then
systemctl restart wadamesh-tile-transcode && nginx -t && systemctl reload nginx
and purge the Cloudflare cache for tiles.wadamesh.com/opentopo/*.
The firmware fetches tiles + the update-check over plain HTTP (on-device HTTPS isn't viable — mbedTLS needs ~30 KB heap, only ~5 KB is free post-Wi-Fi), so the tile + firmware hosts must stay reachable over HTTP. Cloudflare provides the edge cache, HTTPS for the flasher, and hides the origin IP (so no IP lives in this repo or the firmware).
1. VPS (origin)
sudo apt install nginx
sudo mkdir -p /srv/wadamesh/firmware/releases/TOUCH /var/cache/nginx/wadamesh-tiles
sudo cp deploy/nginx/tiles.wadamesh.com.conf /etc/nginx/sites-available/
sudo cp deploy/nginx/firmware.wadamesh.com.conf /etc/nginx/sites-available/
sudo ln -s /etc/nginx/sites-available/tiles.wadamesh.com.conf /etc/nginx/sites-enabled/
sudo ln -s /etc/nginx/sites-available/firmware.wadamesh.com.conf /etc/nginx/sites-enabled/
sudo nginx -t && sudo systemctl reload nginx
2. Cloudflare
- DNS:
A/AAAArecords fortiles,firmware,flasher,@→ the VPS IP, all Proxied (orange cloud). - SSL/TLS: mode Flexible (CF↔origin HTTP) is enough since the origin is
HTTP-only. Do NOT enable "Always Use HTTPS" on
tiles.orfirmware.— the firmware needs plain HTTP there. - Cache Rules:
tiles.wadamesh.com/*→ Eligible for cache, Edge TTL ~14d.firmware.wadamesh.com/releases/*/*.bin→ cache, Edge TTL ~1d.firmware.wadamesh.com/releases/TOUCH(the listing) → short TTL (~60s) or Bypass, so new releases appear promptly.
3. Publishing a release
From a wadamesh checkout (builds both boards, refreshes the listing, rsyncs up):
WADAMESH_VPS=user@your-vps scripts/release.sh beta_2
The on-device check GETs http://firmware.wadamesh.com/releases/TOUCH, finds the
highest beta_<N>, and (once OTA-over-Wi-Fi is re-enabled) pulls
…/releases/TOUCH/beta_<N>/<board>.bin.
Done
- Web flasher ✅ at
flasher.wadamesh.com—deploy/flasher/(esp-web-tools / Web Serial, board picker, manifests pointing at the rolling/latest/merged bins;release.shrefreshes/latest/each publish). - Apex
wadamesh.com301-redirects to the flasher — activate by pointing thewadamesh.comA record at the VPS in Cloudflare (it's still on the parking IP).
TODO before public launch
- Re-enable OTA-over-Wi-Fi in the firmware (currently it version-checks then defers to manual flashing).
- Flip
wadameshrepo public = launch. - Decide tile-proxy sharing: dedicated
tiles.wadamesh.com(this config) vs reusing the meshcomod proxy.
Never commit the VPS IP, SSH keys, or
WADAMESH_VPS. Cloudflare fronts the origin; the deploy target is supplied via the environment at publish time.