wadamesh/platformio.ini

; wadamesh — Heltec V4 TFT touch firmware.
; Standalone PlatformIO project: the MeshCore core is consumed as a library
; (lib/MeshCore here; a git-tagged fork once published). This env is the flattened
; equivalent of meshcomod's heltec_v4_tft_companion_radio_usb_tcp_touch.

[platformio]
default_envs =
  heltec_v4_tft_companion_radio_usb_tcp_touch
  LilyGo_TDeck_companion_radio_touch
  LilyGo_TDeck_Pro_companion_radio_touch
  ThinkNode_M9_companion_radio_touch

[env:heltec_v4_tft_companion_radio_usb_tcp_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = heltec_v4
monitor_speed = 115200
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py

build_flags =
  ; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
  ; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  ; NOTE: tried -D ARDUINO_USB_MODE=1 (HW-CDC, drops unused TinyUSB MSC/DFU ≈ 12 KB internal
  ; DRAM) — but on the real V4 the binary companion link regressed: small per-message frames
  ; arrived yet the larger device-profile frame (node name + keys) dropped bytes over HW-CDC's
  ; smaller TX FIFO. Reverted to the board JSON's TinyUSB CDC. Revisit only with an HW-CDC TX
  ; buffer/DTR-wait fix verified on hardware. (T-Deck ships MODE=1 and is fine — board-specific.)
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  ; --- sensors ---
  -D ENV_INCLUDE_GPS=1
  -D ENV_INCLUDE_AHTX0=1
  -D ENV_INCLUDE_BME280=1
  -D ENV_INCLUDE_BMP280=1
  -D ENV_INCLUDE_SHTC3=1
  -D ENV_INCLUDE_SHT4X=1
  -D ENV_INCLUDE_LPS22HB=1
  -D ENV_INCLUDE_INA3221=1
  -D ENV_INCLUDE_INA219=1
  -D ENV_INCLUDE_INA226=1
  -D ENV_INCLUDE_INA260=1
  -D ENV_INCLUDE_MLX90614=1
  -D ENV_INCLUDE_VL53L0X=1
  -D ENV_INCLUDE_BME680=1
  -D ENV_INCLUDE_BMP085=1
  ; --- Heltec LoRa32 V4 board ---
  -I variants/heltec_v4
  -D HELTEC_LORA_V4
  -D USE_SX1262
  -D ESP32_CPU_FREQ=80
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  ; Original Expansion Kit SW3 "IO": active-low KEY net on GPIO35. This pin was
  ; previously treated as a TX LED, which drove the button line as an output.
  ; Navigation is more valuable on the cramped 240 px touch UI: short=Back,
  ; hold=Home. The PWR switch drives the EC190708 power controller directly and
  ; cannot provide a firmware short-press. The V4-R8 uses GPIO46 for its TX LED.
  -D HELTEC_V4_EXPANSION_IO_PIN=35
  -D P_LORA_DIO_1=14
  -D P_LORA_NSS=8
  -D P_LORA_RESET=12
  -D P_LORA_BUSY=13
  -D P_LORA_SCLK=9
  -D P_LORA_MISO=11
  -D P_LORA_MOSI=10
  -D P_LORA_PA_POWER=7
  -D P_LORA_PA_EN=2
  -D P_LORA_PA_TX_EN=46
  -D P_LORA_GC1109_PA_EN=2
  -D P_LORA_GC1109_PA_TX_EN=46
  -D P_LORA_KCT8103L_PA_CSD=2
  -D P_LORA_KCT8103L_PA_CTX=5
  -D PIN_USER_BTN=0
  -D PIN_VEXT_EN=36
  -D PIN_VEXT_EN_ACTIVE=HIGH
  -D LORA_TX_POWER=10
  -D MAX_LORA_TX_POWER=22
  -D SX126X_REGISTER_PATCH=1
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D PIN_GPS_RX=38
  -D PIN_GPS_TX=39
  -D PIN_GPS_RESET=42
  -D PIN_GPS_RESET_ACTIVE=LOW
  -D PIN_GPS_EN=34
  -D PIN_GPS_EN_ACTIVE=LOW
  -D PIN_ADC_CTRL=37
  -D PIN_VBAT_READ=1
  ; --- TFT ---
  -D HELTEC_LORA_V4_TFT
  -D PIN_BOARD_SDA=4
  -D PIN_BOARD_SCL=3
  -D DISPLAY_ROTATION=2
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D PIN_TFT_RST=18
  -D PIN_TFT_VDD_CTL=-1
  -D PIN_TFT_LEDA_CTL=21
  -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
  -D PIN_TFT_CS=15
  -D PIN_TFT_DC=16
  -D PIN_TFT_SCL=17
  -D PIN_TFT_SDA=33
  ; --- CHSC6x cap touch ---
  -D HAS_HELTEC_V4_CAP_TOUCH=1
  -D PIN_TOUCH_SDA=47
  -D PIN_TOUCH_SCL=48
  -D PIN_TOUCH_RST=44
  -D HELTEC_V4_BUZZER_PIN=6
  ; --- touch UI / companion stack ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  ; Heltec V4 Expansion Kit: local environment sensors UI (Sensors tab, Home env
  ; widget, Local-Sensors page). Board-gated — only this env compiles it.
  -D HAS_EXPANSION_KIT=1
  ; Optional M5Stack CardKB on the board I2C bus (address 0x5F). Runtime-probed,
  ; so the normal on-screen keyboard remains unchanged when none is attached.
  ; Inherited by the V4-R8 target, whose touch/RTC/sensors share the same Wire.
  -D HAS_CARDKB=1
  -D FIRMWARE_OTA_ENV='"heltec_v4_tft_companion_radio_usb_tcp_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  ; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
  ; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D USER_SETUP_LOADED=1
  -D ST7789_DRIVER=1
  -D TFT_WIDTH=240
  -D TFT_HEIGHT=320
  -D TFT_MOSI=33
  -D TFT_SCLK=17
  -D TFT_CS=15
  -D TFT_DC=16
  -D TFT_RST=18
  -D TFT_MISO=-1
  -D SPI_FREQUENCY=80000000
  -D TFT_RGB_ORDER=TFT_RGB
  -D TFT_INVERSION_ON=1
  -D TFT_BL=21
  -D TFT_BACKLIGHT_ON=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7789LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/heltec_v4/*.cpp>

lib_deps =
  ; MeshCore core = the meshcomod monorepo built as a lib, pinned by tag.
  ; Touch-app files (TouchPrefsStore, WifiRuntimeStore, transports, ...) are
  ; vendored in this app's src/ and dropped from the lib via -DMC_VENDORED_TOUCH_APP.
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  bodmer/TFT_eSPI @ ^2.5.43
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; Heltec WiFi LoRa 32 V4-R8 (ESP32-S3R8, 8 MB OCTAL PSRAM) + Expansion Kit V2.
; Inherits the V4 TFT env and overrides ONLY the R8 deltas. The 8 MB octal PSRAM
; claims GPIO33-37, so Heltec moved every control signal off them and the V2
; expansion put the TFT on a hardware-SPI bus SHARED with a new micro-SD slot:
;   Vext 36->40 (now active-LOW) · GPS_EN 34->42 · LED 35->46 · ADC_Ctrl removed
;   TFT (LovyanGFX HW-SPI): MOSI=15 SCK=16 MISO=45 CS=47 DC=48 RST=21 BL=44
;   touch (CHSC6x, shares board I2C on 17/18) · micro-SD (shared TFT SPI, CS=3)
; The build defines HELTEC_LORA_V4_TFT too, so it reuses ALL the V4 touch-UI code;
; HELTEC_LORA_V4_R8 gates only the deltas. USB stays TinyUSB-CDC (USB_MODE=0) like
; the V4 — HW-CDC regresses the companion link on this family (see the V4 note).
; UNTESTED (no hardware yet) — pin sources: Meshtastic heltec_v4_r8 variant +
; Heltec V4-R8 pinmap + Expansion_board_V2.03 schematic. On-device TODO: confirm
; the CHSC6x shares Wire on 17/18, the SD_CS=3 read, and the V2 PAM8904 buzzer.
; ======================================================================
[env:heltec_v4_r8_tft_companion_radio_usb_tcp_touch]
extends = env:heltec_v4_tft_companion_radio_usb_tcp_touch
board = heltec_v4_r8
; Own filter (not inherited): the R8's DISPLAY_CLASS is OUR LGFXDisplay, so the UIColor
; palette must be a project object (UIColorPalette.cpp) -- otherwise the linker pulls the
; core's same-named LGFXDisplay.o from the archive for UIColor and every method collides.
; (The base V4 env must NOT compile the palette: its core ST7789LCDDisplay.o carries one.)
build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<helpers/ui/UIColorPalette.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/heltec_v4/*.cpp>
build_flags =
  ${env:heltec_v4_tft_companion_radio_usb_tcp_touch.build_flags}
  ; --- V4-R8 deltas (later -D wins on the GCC command line) ---
  -D HELTEC_LORA_V4_R8
  ; The text-size presets use these. Forced here, not just in include/lv_conf.h:
  ; the vendored .pio/libdeps/<env>/MeshCore/include/lv_conf.h wins the include
  ; order for src/ compiles (see the T-Deck env), so UITask.cpp would not see
  ; them and the build fails on lv_font_montserrat_18/20/24.
  -D LV_FONT_MONTSERRAT_18=1
  -D LV_FONT_MONTSERRAT_20=1
  -D LV_FONT_MONTSERRAT_24=1
  ; Boot at the S3's full clock. The base env's ESP32_CPU_FREQ=80 is applied in
  ; ESP32Board::begin(), so ALL of setup() — radio init, the SD mount ladder, the
  ; store load, mesh begin, Wi-Fi bring-up — ran at a third speed until UITask::begin
  ; bumped it to 240. The screen-off DFS drop to 80 MHz (setCpuForScreen) is unaffected.
  -D ESP32_CPU_FREQ=240
  ; micro-SD operating clock (perf pass 2026-08-20): after the conservative 4 MHz mount
  ; succeeds, re-begin at this clock with a directory + file READ verify and fall back
  ; to 4 MHz if it fails (include/SdFastClock.h). The same traces already carry the
  ; display at 80 MHz, and the card is the primary store on this board (contacts, chat
  ; history, sync log) — 4 MHz was the M9 ladder's value, never re-tuned here.
  -D SD_SPI_FAST_HZ=20000000
  -D P_LORA_TX_LED=46
  -D PIN_VEXT_EN=40
  -D PIN_VEXT_EN_ACTIVE=LOW
  -D PIN_GPS_EN=42
  -D PIN_GPS_RESET=-1
  ; GPS pins probed on real hardware 2026-08-19: with EN active-LOW asserted
  ; the module streams NMEA on GPIO39 (~6.9k edges/3 s); GPIO38 is silent.
  ; NAMING TRAP: EnvironmentSensorManager does Serial1.setPins(PIN_GPS_TX,
  ; PIN_GPS_RX) and Arduino's first setPins arg is OUR RX — i.e. the
  ; PIN_GPS_TX macro is the pin we RECEIVE on (module's TX). So the module's
  ; TX=GPIO39 belongs in PIN_GPS_TX, matching the inherited plain-V4 values.
  ; Restated explicitly here (with this note) so nobody "fixes" the apparent
  ; swap again. EN polarity active-LOW also hardware-confirmed.
  -D PIN_GPS_RX=38
  -D PIN_GPS_TX=39
  -D PIN_ADC_CTRL=-1
  -D ADC_MULTIPLIER=5.07
  ; TFT on hardware SPI (LovyanGFX), shared with the micro-SD
  -D DISPLAY_CLASS=LGFXDisplay
  -D PIN_TFT_RST=21
  -D PIN_TFT_LEDA_CTL=44
  -D PIN_TFT_CS=47
  -D PIN_TFT_DC=48
  -D PIN_TFT_SCL=16
  -D PIN_TFT_SDA=15
  -D PIN_TFT_MISO=45
  ; TFT_eSPI mirror (kept in sync though LovyanGFX drives the panel)
  -D TFT_MOSI=15
  -D TFT_SCLK=16
  -D TFT_MISO=45
  -D TFT_CS=47
  -D TFT_DC=48
  -D TFT_RST=21
  -D TFT_BL=44
  ; touch (CHSC6x) + board I2C unified on GPIO17/18; micro-SD chip-select
  -D PIN_TOUCH_SDA=17
  -D PIN_TOUCH_SCL=18
  ; RST=-1 ON PURPOSE (tester repro fix): the Expansion V2 wires the CHSC6x reset to GPIO21 — the
  ; SAME line as the ST7789 reset. The chsc6x driver hard-pulses its RST at init (+3 retry sites),
  ; which RESET the LCD mid-boot and wiped its init: logo OK -> screen black -> white/garbled rows
  ; on any redraw. The LGFX display init already resets both chips via pin 21; the touch driver must
  ; never drive it (-1 = every pulse in chsc6x_platform no-ops).
  -D PIN_TOUCH_RST=-1
  -D PIN_TOUCH_INT=43
  -D PIN_BOARD_SDA=17
  -D PIN_BOARD_SCL=18
  -D PIN_SD_CS=3
  ; Buzzer: the Expansion Kit V2 integrates a piezo behind a PAM8904 driver (U9). Per Heltec's
  ; Expansion_board_V2.03.pdf schematic: DIN = net "4" = GPIO4 (P2 header pin 15); EN1/EN2 are
  ; NOT GPIOs -- strapped high via 10K pull-ups (3x boost, always enabled) with DIP switch SW1
  ; on the expansion board as a HARDWARE MUTE (closed = EN grounded = silent). So the stock V4
  ; tone() chime works as-is on DIN. If a tester still hears nothing: check SW1 on their kit.
  -D HELTEC_V4_BUZZER_PIN=4
  -D FIRMWARE_OTA_ENV='"heltec_v4_r8_tft_companion_radio_usb_tcp_touch"'
lib_deps =
  ${env:heltec_v4_tft_companion_radio_usb_tcp_touch.lib_deps}
  lovyan03/LovyanGFX@1.2.21

; ======================================================================
; Attaky Mesh Series: `pio run -e attaky_mesh_series_companion_radio_touch`.
; ======================================================================
[env:attaky_mesh_series_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = attaky_mesh_series
monitor_speed = 115200
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py

build_flags =
  ; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
  ; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D LORA_FREQ=910.525
  -D LORA_BW=250
  -D LORA_SF=7
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  -D ENV_INCLUDE_GPS=1
  ; 0x38 is the FT6636 touch controller, not an AHT10/20. The Adafruit probe
  ; mis-detects it as a sensor and can hang boot on its register 0xBA, so keep off.
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=1
  -D ENV_INCLUDE_BMP280=1
  -D ENV_INCLUDE_SHTC3=1
  -D ENV_INCLUDE_SHT4X=1
  -D ENV_INCLUDE_LPS22HB=1
  -D ENV_INCLUDE_INA3221=1
  -D ENV_INCLUDE_INA219=1
  -D ENV_INCLUDE_INA226=1
  -D ENV_INCLUDE_INA260=1
  ; 0x5A is the keyboard module's AW9523 (left half), not an MLX90614.
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=1
  -D ENV_INCLUDE_BME680=1
  -D ENV_INCLUDE_BMP085=1
  -I variants/attaky_mesh_series
  -D ATTAKY_MESH_SERIES
  -D HAS_ATTAKY_MESH_KEYBOARD=1
  -D USE_SX1262
  -D ESP32_CPU_FREQ=80
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D P_LORA_DIO_1=21
  -D P_LORA_NSS=8
  -D P_LORA_RESET=9
  -D P_LORA_BUSY=16
  -D P_LORA_SCLK=5
  -D P_LORA_MISO=7
  -D P_LORA_MOSI=6
  -D PIN_USER_BTN=0
  -D LORA_TX_POWER=10
  -D MAX_LORA_TX_POWER=22
  -D SX126X_REGISTER_PATCH=1
  -D SX126X_DIO2_AS_RF_SWITCH=true
  ; Ra-01SH clocks the SX1262 from a 32 MHz crystal, not a TCXO, so DIO3 is not a
  ; TCXO supply. Must be 0 explicitly: std_init() defaults to 1.6 V otherwise.
  -D SX126X_DIO3_TCXO_VOLTAGE=0
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D PIN_GPS_RX=18
  -D PIN_GPS_TX=17
  ; EnvironmentSensorManager reads GPS_BAUD_RATE, not GPS_BAUD.
  -D GPS_BAUD_RATE=9600
  ; ATGM336H cold-start can exceed the 1 s probe window. Without this the probe
  ; gives up and start_gps() never runs, so GPS reads on but nothing is parsed.
  -D ENV_SKIP_GPS_DETECT=1
  ; Keep the base rotation portrait; UITask applies the landscape transform.
  -D PIN_BOARD_SDA=2
  -D PIN_BOARD_SCL=1
  -D DISPLAY_ROTATION=2
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D PIN_TFT_RST=10
  -D PIN_TFT_VDD_CTL=-1
  -D PIN_TFT_LEDA_CTL=14
  -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
  -D PIN_TFT_CS=45
  -D PIN_TFT_DC=12
  -D PIN_TFT_SCL=11
  -D PIN_TFT_SDA=13
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"attaky_mesh_series_companion_radio_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D USER_SETUP_LOADED=1
  -D ST7789_DRIVER=1
  -D TFT_WIDTH=240
  -D TFT_HEIGHT=320
  -D TFT_MOSI=13
  -D TFT_SCLK=11
  -D TFT_CS=45
  -D TFT_DC=12
  -D TFT_RST=10
  -D TFT_MISO=-1
  -D SPI_FREQUENCY=80000000
  -D TFT_RGB_ORDER=TFT_RGB
  -D TFT_INVERSION_ON=1
  -D TFT_BL=14
  -D TFT_BACKLIGHT_ON=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7789LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  ; The Attaky driver provides the shared touch API.
  -<helpers/input/TDeckTouch.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/attaky_mesh_series/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  bodmer/TFT_eSPI @ ^2.5.43
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; LilyGo T-Deck / T-Deck Plus — flattened equivalent of meshcomod's
; LilyGo_TDeck_companion_radio_touch. ST7789 via Adafruit (not TFT_eSPI);
; GT911 touch + matrix keyboard + trackball; sensors off except GPS.
; ======================================================================
[env:LilyGo_TDeck_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck
monitor_speed = 115200
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py

build_flags =
  ; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
  ; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  ; --- T-Deck board ---
  -I variants/lilygo_tdeck
  -D LILYGO_TDECK
  -D BOARD_HAS_PSRAM=1
  ; 0 = silence ARDUHAL [E] spam (benign vfs_api cache-miss "no permits for
  ; creation" + Preferences nvs_open NOT_FOUND on first-namespace-access) that
  ; also pollutes the USB-CDC companion stream. Our own Serial.printf logs stay.
  -D CORE_DEBUG_LEVEL=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D PIN_USER_BTN=0
  -D PIN_PERF_POWERON=10
  -D USE_SX1262
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  ; The T-Deck's SX1262 antenna (TX/RX) switch is driven by DIO2 — this MUST be
  ; true. With it false, setDio2AsRfSwitch(false) leaves the switch uncontrolled,
  ; so on TX the +22 dBm PA is never routed to the antenna (~16 dB loss -> ~4 mW).
  ; That was issue #6. (Meshtastic's T-Deck + the Heltec V4 here + every other
  ; MeshCore SX1262 variant use true; the T-Deck was the lone outlier.)
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8f
  -D P_LORA_DIO_1=45
  -D P_LORA_NSS=9
  -D P_LORA_RESET=17
  -D P_LORA_BUSY=13
  -D P_LORA_SCLK=40
  -D P_LORA_MISO=38
  -D P_LORA_MOSI=41
  -D ENV_INCLUDE_GPS=1
  -D ENV_SKIP_GPS_DETECT=1
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D PIN_TFT_RST=-1
  -D PIN_TFT_VDD_CTL=-1
  -D PIN_TFT_LEDA_CTL=42
  -D PIN_TFT_CS=12
  -D PIN_TFT_DC=11
  -D PIN_TFT_SCL=40
  -D PIN_TFT_SDA=41
  -D PIN_GPS_RX=43
  -D PIN_GPS_TX=44
  -D GPS_BAUD_RATE=38400
  ; --- touch UI / companion stack ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"LilyGo_TDeck_companion_radio_touch"'
  -D HAS_TDECK_GT911=1
  -D HAS_TDECK_TRACKBALL=1
  -D HAS_TDECK_KEYBOARD=1
  ; Forced here (not just in lv_conf.h) because .pio/libdeps/<env>/MeshCore/include/lv_conf.h
  ; -- a stale snapshot vendored by the pinned core tag -- sits earlier in the -I search
  ; order than this repo's own include/lv_conf.h, so LV_CONF_INCLUDE_SIMPLE's quoted
  ; #include "lv_conf.h" silently resolves to that stale copy for src/ compiles (though
  ; library .c files, e.g. lvgl's own, still see the right one -- inconsistent per TU). A
  ; -D here is immune to that: it's set before any header is processed and isn't
  ; overridden by a plain #define. Only 20px is forced, for the "at a glance" experiment
  ; below (atGlanceEnsureFont() in UITask.cpp) -- not 18/24, which this board doesn't use.
  -D LV_FONT_MONTSERRAT_20=1
  -D ENABLE_ADVERT_ON_BOOT=0
  -D PIN_TB_UP=15
  -D PIN_TB_DOWN=3
  -D PIN_TB_LEFT=2
  -D PIN_TB_RIGHT=1
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  ; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
  ; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7789LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/lilygo_tdeck/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; LilyGo T-Deck Pro — ESP32-S3, SX1262, 240x320 GDEQ031T10 e-paper,
; CST328/CST3530 touch, TCA8418 keyboard, microSD, and MIA-M10Q GPS.
; Hardware mapping and e-paper timing are grounded in the working
; ~/Projects/camillia/camillia-mt tdeck-pro target and LilyGo/Meshtastic v1.1.
; ======================================================================
[env:LilyGo_TDeck_Pro_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck-pro
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_qspi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py

build_unflags =
  -std=gnu++11

build_flags =
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  ; target.h is included while MeshCore itself is compiled. PlatformIO's LDF
  ; does not expose sibling lib_deps from that scope, so make the Pro display's
  ; transitive headers explicit (same issue as MicroNMEA and Wio LovyanGFX).
  -I"${platformio.libdeps_dir}/${this.__env__}/GxEPD2/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/Adafruit GFX Library"
  -I"${platformio.libdeps_dir}/${this.__env__}/Adafruit BusIO"
  -I"${platformio.libdeps_dir}/${this.__env__}/CSE_Touch/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/CSE_CST328/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
  -I variants/lilygo_tdeck_pro
  -I include
  -I src
  -I src/ui-touch
  -Wno-deprecated-declarations
  -Wno-unused-parameter
  -std=gnu++17
  -DNDEBUG
  -DRADIOLIB_STATIC_ONLY=1
  -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D ESP32_PLATFORM
  -D HAS_TDECK_PRO=1
  -D HAS_TOUCH_UI=1
  -D HAS_PAGER_KEYBOARD=1
  -D BOARD_HAS_PSRAM=1
  -D CORE_DEBUG_LEVEL=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D ARDUINO_USB_MODE=1
  -D ESP32_CPU_FREQ=240
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D USE_SX1262=1
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  -D P_LORA_NSS=3
  -D P_LORA_RESET=4
  -D P_LORA_DIO_1=5
  -D P_LORA_BUSY=6
  -D P_LORA_SCLK=36
  -D P_LORA_MISO=47
  -D P_LORA_MOSI=33
  -D PIN_PERF_POWERON=46
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=2.4f
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D PIN_TFT_SCLK=36
  -D PIN_TFT_MISO=47
  -D PIN_TFT_MOSI=33
  -D PIN_TFT_CS=34
  -D PIN_TFT_DC=35
  -D PIN_TFT_RST=16
  -D PIN_TFT_BUSY=37
  -D PIN_TFT_LEDA_CTL=45
  -D TDECK_PRO_FRONTLIGHT_CHANNEL=0
  -D PIN_TOUCH_RST=38
  -D PIN_TOUCH_INT=12
  -D PIN_TOUCH_ADDR=0x1A
  -D PIN_BOARD_SDA=13
  -D PIN_BOARD_SCL=14
  -D PIN_KB_ADDR=0x34
  -D KB_INT=15
  -D KB_BACKLIGHT=42
  -D PIN_USER_BTN=0
  -D PIN_SD_CS=48
  -D ENV_INCLUDE_GPS=1
  -D ENV_SKIP_GPS_DETECT=1
  -D PIN_GPS_TX=44
  -D PIN_GPS_RX=43
  -D PIN_GPS_EN=39
  -D PIN_GPS_EN_ACTIVE=HIGH
  -D GPS_BAUD_RATE=38400
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  -D DISPLAY_CLASS=TDeckProDisplay
  -D DISPLAY_ROTATION=0
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D UI_LVGL=1
  -D FIRMWARE_OTA_ENV='"LilyGo_TDeck_Pro_companion_radio_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf_tdeck_pro.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  -<helpers/input/TDeckTouch.cpp>
  +<helpers/ui/UIColorPalette.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/lilygo_tdeck_pro/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  SD
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit TCA8418 @ ^1.0.2
  lovyan03/LovyanGFX @ 1.2.21
  zinggjm/GxEPD2 @ 1.6.9
  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
  https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; LilyGo T-Deck Max -- the T-Deck Pro's ESP32-S3, SX1262, 240x320
; GDEQ031T10 e-paper, CST328/CST3530 touch, TCA8418 keyboard, microSD and
; GPS, with the peripheral power enables and resets moved onto an XL9555
; I/O expander and a BQ27220 fuel gauge for battery reporting. Reuses the
; Pro's display and touch drivers unchanged; see variants/lilygo_tdeck_max/PORT.md.
; ======================================================================
[env:LilyGo_TDeck_Max_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = t-deck-max
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_qspi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = variants/lilygo_tdeck/partitions_tdeck_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py

build_unflags =
  -std=gnu++11

build_flags =
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  ; target.h is included while MeshCore itself is compiled. PlatformIO's LDF
  ; does not expose sibling lib_deps from that scope, so make the Pro display's
  ; transitive headers explicit (same issue as MicroNMEA and Wio LovyanGFX).
  -I"${platformio.libdeps_dir}/${this.__env__}/GxEPD2/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/Adafruit GFX Library"
  -I"${platformio.libdeps_dir}/${this.__env__}/Adafruit BusIO"
  -I"${platformio.libdeps_dir}/${this.__env__}/CSE_Touch/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/CSE_CST328/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/SensorLib/src" ; TDeckMaxBoard.h needs XL9555/BQ27220 (same as the Pager)
  ; Max variant first (target.h, TDeckMaxBoard.h, TDeckMaxGps.h), then the
  ; Pro variant for the display and touch drivers it reuses unchanged.
  -I variants/lilygo_tdeck_max
  -I variants/lilygo_tdeck_pro
  -I include
  -I src
  -I src/ui-touch
  -Wno-deprecated-declarations
  -Wno-unused-parameter
  -std=gnu++17
  -DNDEBUG
  -DRADIOLIB_STATIC_ONLY=1
  -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D ESP32_PLATFORM
  -D HAS_TDECK_PRO=1
  -D HAS_TDECK_MAX=1
  -D HAS_TOUCH_UI=1
  -D HAS_PAGER_KEYBOARD=1
  -D BOARD_HAS_PSRAM=1
  -D CORE_DEBUG_LEVEL=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D ARDUINO_USB_MODE=1
  -D ESP32_CPU_FREQ=240
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D USE_SX1262=1
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  -D P_LORA_NSS=3
  -D P_LORA_RESET=4
  -D P_LORA_DIO_1=5
  -D P_LORA_BUSY=6
  -D P_LORA_SCLK=36
  -D P_LORA_MISO=47
  -D P_LORA_MOSI=33
  ; No PIN_PERF_POWERON: on the Max the LoRa supply is XL9555 line 1, switched in
  ; TDeckMaxBoard::begin(); GPIO 46 is not a power gate on this board.
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=2.4f
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D PIN_TFT_SCLK=36
  -D PIN_TFT_MISO=47
  -D PIN_TFT_MOSI=33
  -D PIN_TFT_CS=34
  -D PIN_TFT_DC=35
  -D PIN_TFT_RST=9
  -D PIN_TFT_BUSY=37
  -D PIN_TFT_LEDA_CTL=41
  -D TDECK_PRO_FRONTLIGHT_CHANNEL=0
  ; Touch reset is XL9555 line 7, pulsed in TDeckMaxBoard::begin(). -1 makes
  ; CSE_CST328 skip its own GPIO pulse and turns the display's resetTouch() into
  ; a no-op (GPIO 38 is the ES8311 MCLK on this board).
  -D PIN_TOUCH_RST=-1
  -D PIN_TOUCH_INT=12
  -D PIN_TOUCH_ADDR=0x1A
  -D PIN_BOARD_SDA=13
  -D PIN_BOARD_SCL=14
  -D PIN_KB_ADDR=0x34
  -D KB_INT=15
  -D KB_BACKLIGHT=42
  -D PIN_USER_BTN=0
  -D PIN_SD_CS=48
  -D ENV_INCLUDE_GPS=1
  -D ENV_SKIP_GPS_DETECT=1
  ; Module-perspective names as on the Pro: PIN_GPS_TX is the ESP32's receive pin.
  -D PIN_GPS_TX=2
  -D PIN_GPS_RX=16
  ; No PIN_GPS_EN: the GPS supply is XL9555 line 2, switched by TDeckMaxGps.
  -D GPS_BAUD_RATE=38400
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  -D DISPLAY_CLASS=TDeckProDisplay
  -D DISPLAY_ROTATION=0
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D UI_LVGL=1
  -D FIRMWARE_OTA_ENV='"LilyGo_TDeck_Max_companion_radio_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf_tdeck_pro.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  -<helpers/input/TDeckTouch.cpp>
  +<helpers/ui/UIColorPalette.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/lilygo_tdeck_max/*.cpp>
  +<../variants/lilygo_tdeck_pro/TDeckProDisplay.cpp>
  +<../variants/lilygo_tdeck_pro/TDeckProTouch.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  SD
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit TCA8418 @ ^1.0.2
  lovyan03/LovyanGFX @ 1.2.21
  lewisxhe/SensorLib @ 0.3.3
  zinggjm/GxEPD2 @ 1.6.9
  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
  https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; Seeed Wio Tracker L2 — touch-first ESP32-S3 target with quad-SPI display and SX1262.
; ======================================================================
[env:wio_tracker_l2_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = wio_tracker_l2
monitor_speed = 115200
upload_speed = 921600
board_build.arduino.memory_type = qio_opi
board_build.flash_size = 16MB
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = partitions_tft_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_lgfx_dmadesc.py, merge-bin.py

build_unflags =
  -std=gnu++11

build_flags =
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/Adafruit ADS1X15"
  -I"${platformio.libdeps_dir}/${this.__env__}/LovyanGFX/src"
  -I variants/wio_tracker_l2
  -I include
  -I src
  -I src/ui-touch
  -Wno-deprecated-declarations
  -Wno-unused-parameter
  -std=gnu++17
  -DNDEBUG
  -DRADIOLIB_STATIC_ONLY=1
  -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D ESP32_PLATFORM
  -D HAS_WIO_TRACKER_L2=1
  -D BOARD_HAS_PSRAM=1
  -D ESP32_CPU_FREQ=240
  -D CORE_DEBUG_LEVEL=0
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D USE_SX1262
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  -D P_LORA_NSS=21
  -D P_LORA_RESET=7
  -D P_LORA_DIO_1=9
  -D P_LORA_BUSY=8
  -D P_LORA_SCLK=4
  -D P_LORA_MISO=5
  -D P_LORA_MOSI=6
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ENV_INCLUDE_GPS=1
  -D ENV_SKIP_GPS_DETECT=1
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  ; NAMING TRAP (same one as the V4-R8 and Pager envs above): the core calls
  ; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX) and Arduino's setPins() takes
  ; (rxPin, txPin) -- so PIN_GPS_TX is the pin WE RECEIVE ON, and PIN_GPS_RX is
  ; the pin we transmit on. These were 18/17 (copied from the Attaky env during
  ; bring-up, never checked against this board), which left the UART listening on
  ; GPIO17 while the module talks on GPIO18 -- GPS never produced a fix.
  ; Confirmed by WIO_TRACKER_L2_GPS_PROBE: NMEA on GPIO18 at 9600 (9 sats in view),
  ; GPIO17 silent at 9600/38400/115200.
  -D PIN_GPS_TX=18
  -D PIN_GPS_RX=17
  -D GPS_BAUD_RATE=9600
  ; TEMP DIAGNOSTIC, disarmed now that the wiring is confirmed. Uncomment to
  ; re-run the pin/baud sweep; the block it gates lives in src/main.cpp.
  ; -D WIO_TRACKER_L2_GPS_PROBE=1
  -D PIN_BOARD_SDA=47
  -D PIN_BOARD_SCL=48
  -D PIN_USER_BTN=0
  -D PIN_TFT_LEDA_CTL=-1
  -D PIN_TFT_RST=-1
  -D PIN_TFT_DC=-1
  -D DISPLAY_CLASS=WioTrackerL2Display
  -D DISPLAY_ROTATION=0
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"wio_tracker_l2_companion_radio_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  -<helpers/input/TDeckTouch.cpp>
  +<helpers/ui/UIColorPalette.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/wio_tracker_l2/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  SD_MMC
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit ADS1X15 @ 2.6.2
  stevemarple/MicroNMEA @ ^2.0.6
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  lovyan03/LovyanGFX @ 1.2.27
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

[env:tlora_pager_lr1121_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = lilygo-t-lora-pager
monitor_speed = 115200
board_build.partitions = variants/lilygo_tlora_pager/partitions_tlora_pager_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/patch_nimble_freertos_timer.py, merge-bin.py

build_flags =
  ; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
  ; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/SensorLib/src" ; same: TLoraPagerBoard.h needs XL9555/BQ27220
  -I"${platformio.libdeps_dir}/${this.__env__}/TFT_eSPI" ; same: pager target.h -> ST7796LCDDisplay.h -> TFT_eSPI.h
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  ; LR11X0 stays IN (that's our radio family); SX126X isn't used by this env at all.
  -D RADIOLIB_EXCLUDE_SX126X=1
  -D ESP32_PLATFORM
  ; --- T-LoRa Pager board ---
  -I variants/lilygo_tlora_pager
  -D TLORA_PAGER=1
  -D LV_FONT_MONTSERRAT_18=1
  -D LV_FONT_MONTSERRAT_20=1
  -D LV_FONT_MONTSERRAT_24=1
  -D BOARD_HAS_PSRAM=1
  ; 0 = silence ARDUHAL [E] spam, same rationale as the other two envs.
  -D CORE_DEBUG_LEVEL=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D PIN_USER_BTN=0
  -D USE_LR1121=1
  -D RADIO_CLASS=CustomLR1121
  -D WRAPPER_CLASS=CustomLR1121Wrapper
  ; Full sub-GHz HP-PA power on boot, matching the T-Deck's own LORA_TX_POWER=22
  ; (not Heltec V4's conservative-10-then-raise-in-Settings pattern). +22dBm is
  ; this chip's real ceiling for freq < 1GHz -- confirmed against RadioLib's
  ; pinned LR1120::checkOutputPower() (LR1121 inherits it: HP PA auto-selects
  ; above 14dBm, valid range -9..22) and trail-mate's own
  ; TRAIL_MATE_LORA_TX_POWER_MAX_DBM=22 for this exact board -- not a guess
  ; carried over from the sibling boards. A weak default here (10dBm, ~16x less
  ; power) was silently degrading outbound range on real hardware: adverts/DMs
  ; sent FROM the pager were unreliable while inbound reception was fine, since
  ; the far node's own TX was unaffected.
  -D LORA_TX_POWER=22
  -D P_LORA_DIO_1=14
  -D P_LORA_NSS=36
  -D P_LORA_RESET=47
  -D P_LORA_BUSY=48
  -D P_LORA_SCLK=35
  -D P_LORA_MISO=33
  -D P_LORA_MOSI=34
  -D ENV_INCLUDE_GPS=1
  -D ENV_SKIP_GPS_DETECT=1
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  ; AW9364 backlight enable/pulse pin (ST7796LCDDisplay owns brightness -- see
  ; the CGRAM_OFFSET comment below for why this isn't a plain PWM pin).
  -D PIN_TFT_LEDA_CTL=42
  ; Swapped vs. trail-mate's raw GPS_RX=4/GPS_TX=12: wadamesh's core calls
  ; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX), and HardwareSerial::setPins()
  ; takes (rxPin, txPin) -- so PIN_GPS_TX must be the ESP's own RX pin (4) and
  ; PIN_GPS_RX the ESP's own TX pin (12). See TLORA_PAGER_PORT.md Risk 1c.
  -D PIN_GPS_RX=12
  -D PIN_GPS_TX=4
  -D GPS_BAUD_RATE=38400
  ; --- touch UI / companion stack ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"tlora_pager_lr1121_companion_radio_touch"'
  -D HAS_PAGER_KEYBOARD=1
  -D HAS_PAGER_ENCODER=1
  -D KB_INT=6
  -D KB_BACKLIGHT=46
  -D ROTARY_A=40
  -D ROTARY_B=41
  -D ROTARY_C=7
  ; ES8311 codec I2S pins (NS4150B amp downstream, enabled via XL9555
  ; AMP_EN -- see TLoraPagerBoard::setAmpEnabled()). Confirmed against the
  ; canonical arduino-esp32 pins_arduino.h for this board -- see
  ; TLORA_PAGER_PORT.md's Audio row.
  -D PIN_I2S_MCLK=10
  -D PIN_I2S_BCK=11
  -D PIN_I2S_WS=18
  -D PIN_I2S_DOUT=45
  -D PIN_I2S_SDIN=17
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  ; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
  ; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7796LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
  ; --- ST7796 display (TFT_eSPI) ---
  -D USER_SETUP_LOADED=1
  ; USER_SETUP_LOADED bypasses TFT_eSPI's User_Setup.h, so opt the built-in
  ; 6x8 font back in explicitly. ST7796LCDDisplay's pre-LVGL text API uses
  ; font 1 for Remote UI URLs/buttons and fatal notices; without this define
  ; textWidth() returns 0 and print() draws nothing (bitmap/rects still work).
  -D LOAD_GLCD=1
  -D ST7796_DRIVER=1
  ; REQUIRED: this panel's 222px glass is narrower than the ST7796 controller's
  ; 320px GRAM. TFT_eSPI's ST7796_Rotation.h only applies the needed 49px
  ; column/row offset when this is defined (unlike ST7789, it isn't automatic
  ; for ST7796) -- ST7796LCDDisplay.cpp #errors at compile time without it.
  -D CGRAM_OFFSET=1
  ; REQUIRED on ESP32-S3: TFT_eSPI_ESP32_S3.h's raw register macros (_spi_user,
  ; _spi_cmd, _spi_mosi_dlen -- used by begin_tft_write()/TFT_WRITE_BITS) take
  ; SPI_PORT and feed it straight into IDF's SPI_USER_REG(i)/REG_SPI_BASE(i),
  ; which only resolves to a real peripheral for i>=2 (SPI2/SPI3); i<2 returns
  ; base address 0. Leaving both USE_HSPI_PORT/USE_FSPI_PORT undefined makes
  ; that file fall back to SPI_PORT=FSPI, but FSPI is the *Arduino* enum value
  ; (0 on S3) rather than the raw IDF host index TFT_eSPI's own macros need --
  ; so _spi_user resolves to address 0x10, and the very first writecommand()
  ; in ST7796LCDDisplay::begin()/TFT_eSPI::init() hard-crashes with a
  ; StoreProhibited panic (confirmed on hardware: black screen, boot-looping
  ; "Guru Meditation Error" at TFT_eSPI::begin_tft_write()). USE_FSPI_PORT
  ; forces SPI_PORT=2 (real SPI2/"GPSPI2") consistently across both the raw
  ; macros and the SPIClass(FSPI) object TFT_eSPI constructs internally.
  ; USE_HSPI_PORT (real SPI3) is deliberately NOT used here instead: the
  ; radio's own `SPIClass spi` (variants/lilygo_tlora_pager/target.cpp) takes
  ; its default ctor arg (HSPI), which the Arduino core also maps to real
  ; SPI3 -- so picking HSPI for the display would put both peripherals on the
  ; same physical SPI host and conflict.
  -D USE_FSPI_PORT=1
  -D TFT_WIDTH=222
  -D TFT_HEIGHT=480
  -D TFT_MOSI=34
  -D TFT_SCLK=35
  -D TFT_CS=38
  -D TFT_DC=37
  -D TFT_RST=-1
  -D TFT_MISO=33
  -D TFT_BL=-1
  ; trail-mate's kPagerDisplaySpiClockMhz = 80.
  -D SPI_FREQUENCY=80000000

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<helpers/ui/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/lilygo_tlora_pager/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0
  bodmer/TFT_eSPI @ ^2.5.43
  adafruit/Adafruit TCA8418 @ ^1.0.2
  lewisxhe/SensorLib @ 0.3.3

; Milestone 10: SX1262-variant env for pager units sold with that radio instead
; of LR1121 -- same board JSON, same variant dir, same physical NSS/RESET/BUSY/
; DIO1/SCLK/MISO/MOSI pins (same PCB slot, just a different chip populated —
; see TLORA_PAGER_PORT.md's hardware-facts table). RADIO_CLASS/WRAPPER_CLASS
; swap to the core fork's CustomSX1262/CustomSX1262Wrapper, the exact same
; generic classes the T-Deck already uses -- see target.cpp's radio_init()
; for why no new radio C++ code was needed, just these build flags.
[env:tlora_pager_sx1262_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = lilygo-t-lora-pager
monitor_speed = 115200
board_build.partitions = variants/lilygo_tlora_pager/partitions_tlora_pager_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/patch_nimble_freertos_timer.py, merge-bin.py

build_flags =
  ; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
  ; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -I"${platformio.libdeps_dir}/${this.__env__}/SensorLib/src" ; same: TLoraPagerBoard.h needs XL9555/BQ27220
  -I"${platformio.libdeps_dir}/${this.__env__}/TFT_eSPI" ; same: pager target.h -> ST7796LCDDisplay.h -> TFT_eSPI.h
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  ; SX126X stays IN (that's this env's radio family); LR11X0 isn't used at all.
  -D RADIOLIB_EXCLUDE_LR11X0=1
  -D ESP32_PLATFORM
  ; --- T-LoRa Pager board (SX1262 variant) ---
  -I variants/lilygo_tlora_pager
  -D TLORA_PAGER=1
  -D LV_FONT_MONTSERRAT_18=1
  -D LV_FONT_MONTSERRAT_20=1
  -D LV_FONT_MONTSERRAT_24=1
  -D BOARD_HAS_PSRAM=1
  ; 0 = silence ARDUHAL [E] spam, same rationale as the other envs.
  -D CORE_DEBUG_LEVEL=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D PIN_USER_BTN=0
  -D USE_SX1262=1
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  ; Same 22dBm ceiling as the LR1121 env -- trail-mate's own reference for this
  ; exact board (~/dev/trail-mate/boards/tlora_pager) uses the identical
  ; TRAIL_MATE_LORA_TX_POWER_MAX_DBM=22 for BOTH its LR1121 and SX1262 envs, and
  ; it's this chip's well-known real ceiling too.
  -D LORA_TX_POWER=22
  ; SX126X_DIO2_AS_RF_SWITCH=true and SX126X_CURRENT_LIMIT=140 are carried over
  ; from the T-Deck's own SX1262 config -- NOT because this is the T-Deck, but
  ; because both are tied to the 22dBm target above, not to board-specific analog
  ; circuitry: RadioLib's own SX126x.cpp already defaults DIO2-as-switch to true
  ; internally (same value, just made explicit here), and its default current
  ; limit (60mA) is what silently capped the T-Deck's real TX power below its
  ; target before that env raised it to 140mA -- the same physics apply to any
  ; SX1262 module asked to reach 22dBm, not something unique to the T-Deck's PCB.
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  ; LilyGoLib's SX1262 transmit/receive examples for this exact Pager explicitly
  ; drive the module's DIO3 TCXO supply at 3.0 V. The generic CustomSX1262
  ; fallback is only 1.6 V; that can leave this board's oscillator outside its
  ; specified supply range while still working at very short range. Pass the
  ; board value into begin() so calibration and all later RX/TX use the correct
  ; reference from the start.
  -D SX126X_DIO3_TCXO_VOLTAGE=3.0f
  -D P_LORA_DIO_1=14
  -D P_LORA_NSS=36
  -D P_LORA_RESET=47
  -D P_LORA_BUSY=48
  -D P_LORA_SCLK=35
  -D P_LORA_MISO=33
  -D P_LORA_MOSI=34
  -D ENV_INCLUDE_GPS=1
  -D ENV_SKIP_GPS_DETECT=1
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  ; AW9364 backlight enable/pulse pin (ST7796LCDDisplay owns brightness -- see
  ; the CGRAM_OFFSET comment below for why this isn't a plain PWM pin).
  -D PIN_TFT_LEDA_CTL=42
  ; Swapped vs. trail-mate's raw GPS_RX=4/GPS_TX=12: wadamesh's core calls
  ; Serial1.setPins(PIN_GPS_TX, PIN_GPS_RX), and HardwareSerial::setPins()
  ; takes (rxPin, txPin) -- so PIN_GPS_TX must be the ESP's own RX pin (4) and
  ; PIN_GPS_RX the ESP's own TX pin (12). See TLORA_PAGER_PORT.md Risk 1c.
  -D PIN_GPS_RX=12
  -D PIN_GPS_TX=4
  -D GPS_BAUD_RATE=38400
  ; --- touch UI / companion stack ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"tlora_pager_sx1262_companion_radio_touch"'
  -D HAS_PAGER_KEYBOARD=1
  -D HAS_PAGER_ENCODER=1
  -D KB_INT=6
  -D KB_BACKLIGHT=46
  -D ROTARY_A=40
  -D ROTARY_B=41
  -D ROTARY_C=7
  ; ES8311 codec I2S pins (NS4150B amp downstream, enabled via XL9555
  ; AMP_EN -- see TLoraPagerBoard::setAmpEnabled()). Confirmed against the
  ; canonical arduino-esp32 pins_arduino.h for this board -- see
  ; TLORA_PAGER_PORT.md's Audio row.
  -D PIN_I2S_MCLK=10
  -D PIN_I2S_BCK=11
  -D PIN_I2S_WS=18
  -D PIN_I2S_DOUT=45
  -D PIN_I2S_SDIN=17
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  ; Smoother scroll: lower deceleration than LVGL's default (10) so flicks glide
  ; longer instead of stopping abruptly. lv_conf leaves this unset, so this -D wins.
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7796LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
  ; --- ST7796 display (TFT_eSPI) ---
  -D USER_SETUP_LOADED=1
  ; Same physical display/text path as the LR1121 Pager environment above.
  -D LOAD_GLCD=1
  -D ST7796_DRIVER=1
  ; REQUIRED: this panel's 222px glass is narrower than the ST7796 controller's
  ; 320px GRAM. TFT_eSPI's ST7796_Rotation.h only applies the needed 49px
  ; column/row offset when this is defined (unlike ST7789, it isn't automatic
  ; for ST7796) -- ST7796LCDDisplay.cpp #errors at compile time without it.
  -D CGRAM_OFFSET=1
  ; REQUIRED on ESP32-S3: see the LR1121 env's identical comment above --
  ; same display, same panel, same constraint, unrelated to the radio chip.
  -D USE_FSPI_PORT=1
  -D TFT_WIDTH=222
  -D TFT_HEIGHT=480
  -D TFT_MOSI=34
  -D TFT_SCLK=35
  -D TFT_CS=38
  -D TFT_DC=37
  -D TFT_RST=-1
  -D TFT_MISO=33
  -D TFT_BL=-1
  ; trail-mate's kPagerDisplaySpiClockMhz = 80.
  -D SPI_FREQUENCY=80000000

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<helpers/ui/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/lilygo_tlora_pager/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0
  bodmer/TFT_eSPI @ ^2.5.43
  adafruit/Adafruit TCA8418 @ ^1.0.2
  lewisxhe/SensorLib @ 0.3.3
[env:ThinkNode_M9_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = thinknode_m9
monitor_speed = 115200
board_build.partitions = variants/thinknode_m9/partitions_m9_touch.csv
; patch_radiolib_lr11x0: preprod M9 LR1110s run old transceiver FW that rejects
; DriveDiosInSleepMode (0x012A, FW 0x0308+) with CMD_PERR -> begin() = -706.
; The pre-script makes RadioLib's config() skip it on old FW (idempotent,
; per-env libdeps copy). See scripts/build/patch_radiolib_lr11x0.py.
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, pre:scripts/build/patch_radiolib_lr11x0.py, pre:scripts/build/patch_meshcore_rv3028_define.py, merge-bin.py

build_unflags =
  -std=gnu++11
  -std=gnu++14

build_flags =
  ; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
  ; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -Wno-deprecated-declarations -Wno-unused-parameter -Wno-cpp -Wno-overflow -Wno-return-type -std=gnu++17 -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  ; The text-size presets use these. Forced here, not just in include/lv_conf.h:
  ; the vendored .pio/libdeps/<env>/MeshCore/include/lv_conf.h wins the include
  ; order for src/ compiles, so UITask.cpp would not see them and the build fails
  ; on lv_font_montserrat_18/20/24.
  -D LV_FONT_MONTSERRAT_18=1
  ; (20px is already forced further down for the at-a-glance body font.)
  -D LV_FONT_MONTSERRAT_24=1
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  ; --- ThinkNode M9 board ---
  -I variants/thinknode_m9
  -D HAS_THINKNODE_M9
  -D BOARD_HAS_PSRAM=1
  ; 0 = silence ARDUHAL [E] spam, same rationale as the other envs — worse here:
  ; with the UART bridge (below), Serial is UART0, which doubles as the
  ; MULTI_TRANSPORT_COMPANION frame stream, so the spam lands mid-frame.
  -D CORE_DEBUG_LEVEL=0
  ; M9 uses the UART bridge (ttyUSB0), not native USB-CDC — confirmed during
  ; Specter bring-up. With ARDUINO_USB_CDC_ON_BOOT=1 (the T-Deck's setting)
  ; app Serial logs go to a ttyACM* port this board doesn't expose and
  ; appear completely silent.
  -D ARDUINO_USB_CDC_ON_BOOT=0
  ; PIN_USER_BTN deliberately NOT defined: the M9 has no user/BOOT button at
  ; all (schematic-confirmed — only a power-cut slider and a reset button,
  ; neither a GPIO). Defining it as 0 put UITask's screen-lock poll on a
  ; floating strapping pin (phantom-lock risk) and armed the Power-off menu's
  ; deep-sleep wake on a button that can never be pressed.
  -D RADIO_CLASS=CustomLR1110
  -D WRAPPER_CLASS=CustomLR1110Wrapper
  -D LORA_TX_POWER=22
  ; LR1110 clock: TCXO mode at 3.3 V — EMPIRICALLY CONFIRMED on the tester's
  ; preproduction unit: Meshtastic's thinknode_m9 variant logs "using DIO3 as
  ; TCXO reference voltage at 3.300000 V" followed by "LR1110 init result 0".
  ; The earlier theory here (Y1 = self-powered active oscillator -> tcxo must
  ; be 0) was disproven on hardware: with 0 the chip boots on its internal RC
  ; (SPI alive, no -2) but the first command needing the real 32 MHz clock is
  ; rejected -> radio init failed -707 (bring-up build #1, 2026-07-06). The
  ; schematic's "VTCXO rail" feeding Y1 is evidently the LR1110's own
  ; TCXO-supply output, so the chip must drive it.
  -D LR11X0_DIO3_TCXO_VOLTAGE=3.3
  ; (RADIOLIB_DEBUG_BASIC was a bring-up flag, dropped now that the radio is
  ; proven on hardware — target.cpp's own LR1110 version print stays.)
  -D RX_BOOSTED_GAIN=true
  ; DIO5/DIO6 -> RFSW0_V1/RFSW1_V2 confirmed against the V1.0 schematic (LR1110
  ; block, U7 pins 19/20 -> R19/R20 -> U8 V1/V2) — see target.cpp for the table
  ; and M9_PORT.md for the crop. The per-mode polarity is the conventional
  ; 2-pin table every other MeshCore LR1110 board uses, not independently
  ; re-derived from U8's datasheet (part number isn't printed on the schematic).
  -D RF_SWITCH_TABLE
  ; --- LR1110 SPI / control pins (verified: V1.0 schematic + boot log) ---
  -D P_LORA_NSS=39
  -D P_LORA_DIO_1=42
  -D P_LORA_RESET=45
  -D P_LORA_BUSY=41
  -D P_LORA_SCLK=40
  -D P_LORA_MISO=38
  -D P_LORA_MOSI=47
  ; --- Peripheral I2C bus 0 (Wire): RTC PCF8563 0x51 / IMU QMI8658 0x6b /
  ;     compass QMC6309 0x7c. Brought up by ESP32Board::begin(). ---
  -D PIN_BOARD_SDA=7
  -D PIN_BOARD_SCL=6
  -D PIN_VBAT_READ=13
  ; --- GPS (CC1167Q, UART1) ---
  -D ENV_INCLUDE_GPS=1
  ; The GPS is soldered on, so skip the boot-time detect probe: a cold-booting
  ; CC1167Q can miss the 1 s NMEA window, leaving gps_detected false — which
  ; kills the GPS setting (and the GPS_LONG key) until reboot.
  -D ENV_SKIP_GPS_DETECT=1
  -D PIN_GPS_RX=3
  -D PIN_GPS_TX=2
  -D PIN_GPS_EN=11
  -D PIN_GPS_RESET=5
  -D PIN_GPS_RESET_ACTIVE=HIGH
  ; GPS_RST1 -> R46 -> NPN Q16 base: GPIO HIGH turns Q16 on, pulling the module's
  ; reset pin to GND — so HIGH asserts reset, LOW releases it (inverted vs. library default)
  -D PIN_GPS_EN_ACTIVE=LOW
  ; GPIO10 (GPS ON_OFF) and GPIO4 (1PPS) exist on the schematic but have no
  ; consumer in this driver yet — reserved, not wired.
  -D GPS_BAUD_RATE=115200
  -D THINKNODE_M9_BUZZER_PIN=9
  -D ENV_INCLUDE_AHTX0=0
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=0
  -D ENV_INCLUDE_BMP085=0
  ; --- ST7789 panel (manufacturer-confirmed; NOT ILI9341) ---
  ; No LILYGO_TDECK / HELTEC_LORA_V4_TFT macro is defined, so ST7789LCDDisplay
  ; uses its default branch (Adafruit_ST7789 over the global `SPI`, the same
  ; instance the radio uses) — matches the LR1110 reference variants, which
  ; also share one SPI peripheral across radio + display + (on the M9) SD.
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  ; HARDWARE-VERIFIED (bring-up #6, 2026-07-06): rotation 3 rendered the UI
  ; 180 degrees off on the tester's unit; 1 is the correct landscape
  ; orientation (keyboard below screen). Adafruit rotations 1/3 are the two
  ; landscape options, 180 degrees apart.
  -D DISPLAY_ROTATION=1
  ; PIN_TFT_LEDA_CTL is set to -1, NOT left undefined: the installed ST7789LCDDisplay
  ; references it unconditionally (`if (PIN_TFT_LEDA_CTL != -1)`, no #ifdef guard around
  ; the macro itself — leaving it undefined is a compile error, not a no-op). -1 makes
  ; that check skip the pin entirely, since the vendored class always drives it
  ; active-HIGH, but the M9's backlight is a PNP transistor (active-LOW) — so
  ; ThinkNodeM9Board owns BL_EN (GPIO17) directly instead (see M9Board.h/.cpp).
  ; PIN_PERIPH_POWER is the OTHER (also active-low) rail, gating the LCD/GPS/sensors,
  ; and IS passed through ST7789LCDDisplay's RefCountedDigitalPin constructor arg in
  ; target.cpp.
  -D PIN_TFT_LEDA_CTL=-1
  -D PIN_PERIPH_POWER=18
  -D PIN_TFT_BL_EN=17
  -D PIN_TFT_RST=14
  -D PIN_TFT_DC=15
  -D PIN_TFT_CS=16
  ; PIN_TFT_SCL / PIN_TFT_SDA intentionally NOT defined: only the
  ; USE_PIN_TFT / LILYGO_TDECK / HELTEC_LORA_V4_TFT branches of
  ; ST7789LCDDisplay's constructor consume them, and M9 uses none of those —
  ; it takes the default `display(&SPI, PIN_TFT_CS, PIN_TFT_DC, PIN_TFT_RST)`
  ; branch (global SPI, same instance the radio uses).
  ;
  ; NOTE: a software-SPI (USE_PIN_TFT) diagnostic build was tried here to test
  ; whether the class's hardcoded 80MHz hardware SPI clock was corrupting the
  ; boot-splash write. It wasn't — software SPI reproduced the EXACT same
  ; freeze-then-TG1WDT_SYS_RST at the exact same point, just slower, which
  ; rules out the SPI clock/signal-integrity theory entirely. See
  ; M9_PORT.md / git history if revisiting that path.
  ; microSD: on the shared LoRa SPI bus, same as T-Deck. CS is GPIO48 — the
  ; schematic net SPICLK_N, which is NOT one of the GPIO33-37 octal-PSRAM
  ; lines: SPICLK_N/GPIO48 (and SPICLK_P/GPIO47) are only reserved on the
  ; R8V/R16V 1.8V-differential-clock variants. This board is a plain R8 (see
  ; the env comment above), which uses the ordinary single-ended SPICLK
  ; instead, so GPIO48 is genuinely free. Confirmed via schematic: GPS_RST1
  ; and this net were the ones directly identified, not inferred.
  -D PIN_SD_CS=48
  -D HAS_M9_KEYBOARD=1
  ; QMC6309 magnetometer on the peripheral bus (Wire, 7/6) at 0x7C — exposed to
  ; Lua apps as wada.sys.compass() (CAP_COMPASS); driver in M9Compass.cpp.
  -D HAS_M9_COMPASS=1
  ; QMI8658 IMU on the same bus at 0x6B. Accelerometer only, so the compass can
  ; correct for tilt — wada.sys.accel() (CAP_IMU); driver in M9Imu.cpp.
  -D HAS_M9_IMU=1
  ; target.cpp builds the GPS on WadaNmeaLocationProvider and provides
  ; wadaGpsMotion(), so wada.sys.gps() carries speed_kmh/course on this board.
  -D HAS_GPS_MOTION=1
  ; Keyboard bus SCHEMATIC-VERIFIED (V1.0 sheet, bring-up #9): S3 GPIO20 =
  ; net ESP32-2_SDA, GPIO21 = ESP32-2_SCL, to the keyboard ESP32-S2 (its
  ; GPIO7/6) through R2/R1 series resistors, pullups R73/R72, S2 powered from
  ; always-on 3V3 via R3. GPIO19/20 are also the S3's native USB D-/D+ pads —
  ; M9Board::begin() must release the USB-Serial-JTAG pad claim first.
  -D PIN_KB_SDA=20
  -D PIN_KB_SCL=21
  -D PIN_KB_ADDR=0x6c
  ; --- touch UI / companion stack (M9 has no touch — keyboard + d-pad only;
  ;     both text entry and keypad-nav focus traversal are wired, see
  ;     M9_PORT.md) ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"ThinkNode_M9_companion_radio_touch"'
  ; 20px Montserrat for the at-a-glance body (atGlanceEnsureFont). 28px filled
  ; this 240x320 panel and crowded out the message (#446); the T-Deck already
  ; dropped to 20 for the same reason. Only 20px is forced, nothing else.
  -D LV_FONT_MONTSERRAT_20=1
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf_m9.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D DISPLAY_CLASS=ST7789LCDDisplay
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<*.c>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/thinknode_m9/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0

; ======================================================================
; RAK WisMesh Tap V2 — ST7789 TFT + FT5x06 capacitive touch + SX1262.
; RAK3312 module (ESP32-S3, 16 MB Flash DIO, 8 MB Octal PSRAM).
; ======================================================================
[env:rak_tap_v2_companion_radio_touch]
platform = platformio/espressif32@6.11.0
framework = arduino
board = rak_tap_v2
monitor_speed = 115200
board_build.flash_mode = dio                ; RAK3312 requires DIO (board JSON defaults to qio)
board_build.partitions = variants/rak_tap_v2/partitions_rak_tap_v2_touch.csv
extra_scripts = pre:scripts/build/pre_gen_baked.py, pre:scripts/inject_wifi_env.py, pre:scripts/build/patch_lvgl_anim_uaf.py, pre:scripts/build/patch_meshcore_txt_timestamp.py, merge-bin.py

; Round-1b USB: MODE=1 HW CDC (single COM7). No 1200bps touch — use DTR/RTS reset.
build_unflags =
  -D ARDUINO_USB_MODE=0

upload_speed = 460800
upload_flags =
    --before=default_reset
    --after=hard_reset

build_flags =
  ; 1.17 core: ESP32Board.cpp includes <target.h> -> MicroNMEALocationProvider.h (header-only
  ; provider), so MicroNMEA never chains into the core lib's LDF scope -- hand it the path.
  -I"${platformio.libdeps_dir}/${this.__env__}/MicroNMEA/src"
  -Wno-deprecated-declarations -Wno-unused-parameter -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
  -D MC_VENDORED_TOUCH_APP
  -D LORA_FREQ=869.618
  -D LORA_BW=62.5
  -D LORA_SF=8
  -D ENABLE_PRIVATE_KEY_IMPORT=1
  -D ENABLE_PRIVATE_KEY_EXPORT=1
  -D RADIOLIB_EXCLUDE_CC1101=1
  -D RADIOLIB_EXCLUDE_RF69=1
  -D RADIOLIB_EXCLUDE_SX1231=1
  -D RADIOLIB_EXCLUDE_SI443X=1
  -D RADIOLIB_EXCLUDE_RFM2X=1
  -D RADIOLIB_EXCLUDE_SX128X=1
  -D RADIOLIB_EXCLUDE_AFSK=1
  -D RADIOLIB_EXCLUDE_AX25=1
  -D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
  -D RADIOLIB_EXCLUDE_MORSE=1
  -D RADIOLIB_EXCLUDE_APRS=1
  -D RADIOLIB_EXCLUDE_BELL=1
  -D RADIOLIB_EXCLUDE_RTTY=1
  -D RADIOLIB_EXCLUDE_SSTV=1
  -D ESP32_PLATFORM
  ; --- sensors (GPS + AHTx0 + BME680 enabled) ---
  -D ENV_INCLUDE_GPS=1
  -D ENV_INCLUDE_AHTX0=1
  -D ENV_INCLUDE_BME280=0
  -D ENV_INCLUDE_BMP280=0
  -D ENV_INCLUDE_SHTC3=0
  -D ENV_INCLUDE_SHT4X=0
  -D ENV_INCLUDE_LPS22HB=0
  -D ENV_INCLUDE_INA3221=0
  -D ENV_INCLUDE_INA219=0
  -D ENV_INCLUDE_INA226=0
  -D ENV_INCLUDE_INA260=0
  -D ENV_INCLUDE_MLX90614=0
  -D ENV_INCLUDE_VL53L0X=0
  -D ENV_INCLUDE_BME680=1
  -D ENV_INCLUDE_BMP085=0
  ; --- LoRa SX1262 (RAK3312 module, same pins as RAK3112) ---
  -I variants/rak_tap_v2
  -D RAK_WISMESH_TAP_V2=1
  -D USE_SX1262
  -D ESP32_CPU_FREQ=240
  -D RADIO_CLASS=CustomSX1262
  -D WRAPPER_CLASS=CustomSX1262Wrapper
  -D LORA_TX_POWER=22
  -D P_LORA_TX_LED=46
  -D P_LORA_DIO_1=47
  -D P_LORA_NSS=7
  -D P_LORA_RESET=8
  -D P_LORA_BUSY=48
  -D P_LORA_SCLK=5
  -D P_LORA_MISO=3
  -D P_LORA_MOSI=6
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D PIN_GPS_RX=43
  -D PIN_GPS_TX=44
  -D PIN_USER_BTN=0
  -D PIN_VEXT_EN=14
  -D PIN_BOARD_SDA=9
  -D PIN_BOARD_SCL=40
  ; --- TFT (ST7789 240x320, LovyanGFX hardware SPI on FSPI/SPI2_HOST SCL=13/SDA=11) ---
  ; USB: ARDUINO_USB_* from boards/rak_tap_v2.json (MODE=1 HW CDC, Meshtastic-aligned)
  -D DISPLAY_CLASS=LGFXDisplay
  -D LGFX_INVERT_COLOR=true   ; false=white bg, true=black bg (ST7789 INVON)
  -D DISPLAY_ROTATION=3
  -D DISPLAY_SCALE_X=1.0
  -D DISPLAY_SCALE_Y=1.0
  -D PIN_TFT_RST=-1
  -D PIN_TFT_LEDA_CTL=41
  -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
  -D PIN_TFT_CS=12
  -D PIN_TFT_DC=42
  -D PIN_TFT_SCL=13
  -D PIN_TFT_SDA=11
  ; --- FT5x06 capacitive touch (I2C0 addr 0x38, SDA=9/SCL=40) ---
  -D HAS_RAK_TAP_V2=1
  -D RAK_TS_FLIP_X=1
  -D RAK_TS_FLIP_Y=1
  -D PIN_TOUCH_SDA=9
  -D PIN_TOUCH_SCL=40
  -D PIN_TOUCH_INT=39
  ; --- touch UI / companion stack ---
  -I include
  -I src
  -I src/ui-touch
  -D UI_LVGL=1
  -D HAS_TOUCH_UI=1
  -D FIRMWARE_OTA_ENV='"rak_tap_v2_companion_radio_touch"'
  -D ENABLE_ADVERT_ON_BOOT=0
  -D LV_CONF_PATH=lv_conf.h
  -D LV_CONF_INCLUDE_SIMPLE=1
  -D LV_INDEV_DEF_SCROLL_THROW=7
  -D USER_SETUP_LOADED=1
  -D ST7789_DRIVER=1
  -D TFT_WIDTH=320
  -D TFT_HEIGHT=240
  -D TFT_MOSI=11
  -D TFT_SCLK=13
  -D TFT_CS=12
  -D TFT_DC=42
  -D TFT_RST=-1
  -D TFT_MISO=-1
  -D SPI_FREQUENCY=40000000
  -D TFT_RGB_ORDER=TFT_RGB
  -D TFT_INVERSION_ON=1
  -D TFT_BL=41
  -D TFT_BACKLIGHT_ON=1
  -D MAX_CONTACTS=2000
  -D MAX_GROUP_CHANNELS=40
  -D ADMIN_PASSWORD='"password"'
  -D MULTI_TRANSPORT_COMPANION=1
  -D WADAMESH_FORK_BUILD=1
  -D TCP_PORT=5000
  -D WS_PORT=8765
  -D BLE_PIN_CODE=123456
  -D CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=1
  -D CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
  -D CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096

build_src_filter =
  +<*.cpp>
  +<helpers/*.cpp>
  +<helpers/esp32/*.cpp>
  +<helpers/input/*.cpp>
  ; RAK's DISPLAY_CLASS is OUR LGFXDisplay (variants/rak_tap_v2) -- the UIColor palette
  ; must come from a project object, or the linker pulls the core's same-named
  ; LGFXDisplay.o from the archive for it and every method collides.
  +<helpers/ui/UIColorPalette.cpp>
  +<ui-touch/*.cpp>
  +<ui-touch/*.c>
  +<../variants/rak_tap_v2/*.cpp>

lib_deps =
  https://github.com/ALLFATHER-BV/meshcomod.git#core-v1.17.4
  SPI
  Wire
  jgromes/RadioLib @ ^7.6.0
  rweather/Crypto @ ^0.4.0
  adafruit/RTClib @ ^2.1.3
  melopero/Melopero RV3028 @ ^1.1.0
  electroniccats/CayenneLPP @ 1.6.1
  h2zero/NimBLE-Arduino @ 1.4.3
  adafruit/Adafruit INA3221 Library @ ^1.0.1
  adafruit/Adafruit INA219 @ ^1.2.3
  robtillaart/INA226 @ ^0.6.4
  adafruit/Adafruit INA260 Library @ ^1.5.3
  adafruit/Adafruit AHTX0 @ ^2.0.5
  adafruit/Adafruit BME280 Library @ ^2.3.0
  adafruit/Adafruit BMP280 Library @ ^2.6.8
  adafruit/Adafruit SHTC3 Library @ ^1.0.1
  sensirion/Sensirion I2C SHT4x @ ^1.1.2
  arduino-libraries/Arduino_LPS22HB @ ^1.0.2
  adafruit/Adafruit MLX90614 Library @ ^2.1.5
  adafruit/Adafruit_VL53L0X @ ^1.2.4
  stevemarple/MicroNMEA @ ^2.0.6
  adafruit/Adafruit BME680 Library @ ^2.0.4
  adafruit/Adafruit BMP085 Library @ ^1.2.4
  adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
  ESP32Async/ESPAsyncWebServer @ 3.10.3
  file://arch/esp32/AsyncElegantOTA
  lvgl/lvgl @ ^8.3.11
  lovyan03/LovyanGFX@1.2.21
  bodmer/TFT_eSPI @ ^2.5.43
  densaugeo/base64 @ ~1.4.0
  knolleary/PubSubClient @ ^2.8.0