Merge pull request #209 from y4m-y4m/master

Add makerdiary m60 keyboard (uses nrf52840_m2)

.github/workflows/githubci.yml

@@ -36,6 +36,7 @@ jobs:
           - 'ebyte_e73_tbb'
           - 'electronut_labs_papyr'
           - 'ikigaisense_vita'
+          - 'm60_keyboard'
           - 'mdk_nrf52840_dongle'
           - 'nice_nano'
           - 'nrf52840_m2'

src/boards/m60_keyboard/board.h

@@ -0,0 +1,71 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Yihui Xiong for Makerdiary
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _MAKERDIARY_M60_KEYBOARD_H_
+#define _MAKERDIARY_M60_KEYBOARD_H_
+
+#define _PINNUM(port, pin)    ((port)*32 + (pin))
+
+/*------------------------------------------------------------------*/
+/* LED
+ *------------------------------------------------------------------*/
+#define LEDS_NUMBER           1
+#define LED_PRIMARY_PIN       _PINNUM(0, 30)  // Red
+#define LED_STATE_ON          0
+
+#define LED_RGB_RED_PIN       _PINNUM(0, 30)
+#define LED_RGB_GREEN_PIN     _PINNUM(0, 29)
+#define LED_RGB_BLUE_PIN      _PINNUM(0, 31)
+#define BOARD_RGB_BRIGHTNESS  0x404040
+/*------------------------------------------------------------------*/
+/* BUTTON
+ *------------------------------------------------------------------*/
+#define BUTTONS_NUMBER        2
+#define BUTTON_1              _PINNUM(0, 27)
+#define BUTTON_2              _PINNUM(1, 7)
+#define BUTTON_PULL           NRF_GPIO_PIN_PULLUP
+
+//--------------------------------------------------------------------+
+// BLE OTA
+//--------------------------------------------------------------------+
+#define BLEDIS_MANUFACTURER   "Makerdiary"
+#define BLEDIS_MODEL          "M60 Mechanical Keyboard"
+
+//--------------------------------------------------------------------+
+// USB
+//--------------------------------------------------------------------+
+#define USB_DESC_VID            0x2886
+#define USB_DESC_UF2_PID        0xF00F
+#define USB_DESC_CDC_ONLY_PID   0xF00F
+
+//--------------------------------------------------------------------+
+// UF2
+//--------------------------------------------------------------------+
+#define UF2_PRODUCT_NAME        "MakerDiary M60 Mechanical Keyboard"
+#define UF2_VOLUME_LABEL        "M60KEYBOARD"
+#define UF2_BOARD_ID            "M60KEYBOARD"
+#define UF2_INDEX_URL           "https://wiki.makerdiary.com/m60/"
+
+
+#endif /* _MAKERDIARY_M60_KEYBOARD_H_ */

src/boards/m60_keyboard/board.mk

@@ -0,0 +1,2 @@
+MCU_SUB_VARIANT = nrf52840
+USE_NFCT = yes

src/boards/m60_keyboard/pinconfig.c

@@ -0,0 +1,19 @@
+#include "boards.h"
+#include "uf2/configkeys.h"
+
+__attribute__((used, section(".bootloaderConfig")))
+const uint32_t bootloaderConfig[] =
+{
+  /* CF2 START */
+  CFG_MAGIC0, CFG_MAGIC1,                       // magic
+  5, 100,                                       // used entries, total entries
+
+  204, 0x100000,                                // FLASH_BYTES = 0x100000
+  205, 0x40000,                                 // RAM_BYTES = 0x40000
+  208, (USB_DESC_VID << 16) | USB_DESC_UF2_PID, // BOOTLOADER_BOARD_ID = USB VID+PID, used for verification when updating bootloader via uf2
+  209, 0xada52840,                              // UF2_FAMILY = 0xada52840
+  210, 0x20,                                    // PINS_PORT_SIZE = PA_32
+
+  0, 0, 0, 0, 0, 0, 0, 0
+  /* CF2 END */
+};