Merge branch 'rak-tag-button-delay' into dev

.github/workflows/githubci.yml

@@ -17,7 +17,7 @@ jobs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
     steps:
       - name: Checkout Code
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Set matrix
         id: set-matrix
@@ -36,7 +36,7 @@ jobs:
         board: ${{ fromJSON(needs.set-matrix.outputs.matrix) }}
     steps:
     - name: Checkout Code
-      uses: actions/checkout@v7
+      uses: actions/checkout@v6
       with:
         fetch-depth: 0
         submodules: true
@@ -55,7 +55,7 @@ jobs:
         make BOARD=${{ matrix.board }} all
         make BOARD=${{ matrix.board }} copy-artifact
 
-    - uses: actions/upload-artifact@v7
+    - uses: actions/upload-artifact@v6
       with:
         name: ${{ matrix.board }}
         path: _bin/${{ matrix.board }}
@@ -67,7 +67,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
     - name: Collect all board artifacts
-      uses: actions/download-artifact@v8
+      uses: actions/download-artifact@v6
       with:
         path: _bin
         merge-multiple: true
@@ -85,4 +85,4 @@ jobs:
         files: |
           _bin/*_bootloader-*.zip
           _bin/*_bootloader-*.hex
-          _bin/update-*_bootloader-*.uf2
+          _bin/update-*_bootloader-*.uf2

README.md

@@ -52,8 +52,10 @@
 - Heltec T096
 - Heltec T1
 - Heltec T114 / HT-nRF5262
-- LilyGO T-Echo
+- LilyGo T-Echo
+- LilyGo T-Echo Lite
 - Minewsemi MX25LE01
+- Nordic PCA10056 (nRF52840 DK)
 - Nologo ProMicro NRF52840 (aka SuperMini NRF52840)
 - RAK 4631
 - RAK 3401
@@ -78,7 +80,9 @@ When in OTA DFU mode, devices advertise using a board-specific name rather than
 | Heltec T1                    | `T1_DFU`                 |
 | Heltec T114                  | `T114_DFU`               |
 | LILYGO T-Echo                | `LGTE_DFU`               |
+| LILYGO T-Echo Lite           | `LTEL_DFU`               |
 | Minewsemi MX25LE01           | `MX25_DFU`               |
+| Nordic PCA10056              | `N056_DFU`               |
 | ProMicro NRF52840            | `PROM_DFU`               |
 | RAK 4631                     | `4631_DFU`               |
 | RAK 3401                     | `3401_DFU`               |

src/boards/lilygo_techo_lite/board.cmake

@@ -0,0 +1 @@
+set(MCU_VARIANT nrf52840)

src/boards/lilygo_techo_lite/board.h

@@ -0,0 +1,66 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _LILYGO_TECHO_LITE_H
+#define _LILYGO_TECHO_LITE_H
+
+#define _PINNUM(port, pin)    ((port)*32 + (pin))
+
+#define UICR_REGOUT0_VALUE UICR_REGOUT0_VOUT_3V3
+
+#define PIN_LDO_ENABLE      _PINNUM(0, 30)
+
+/*------------------------------------------------------------------*/
+/* LED
+ *------------------------------------------------------------------*/
+#define LEDS_NUMBER         2
+#define LED_PRIMARY_PIN     _PINNUM(1, 7) // Green
+#define LED_SECONDARY_PIN   _PINNUM(1, 5) // Blue
+#define LED_STATE_ON        0
+
+/*------------------------------------------------------------------*/
+/* BUTTON
+ *------------------------------------------------------------------*/
+#define BUTTONS_NUMBER    2  // hold down user button on boot to enter OTA DFU mode.
+#define BUTTON_1          _PINNUM(0, 24)  // user button
+#define BUTTON_2          _PINNUM(0, 24)
+#define BUTTON_PULL       NRF_GPIO_PIN_PULLUP
+
+//--------------------------------------------------------------------+
+// BLE OTA
+//--------------------------------------------------------------------+
+#define BLEDIS_MANUFACTURER  "LilyGo"
+#define BLEDIS_MODEL         "T-Echo-Lite"
+
+//--------------------------------------------------------------------+
+// USB
+//--------------------------------------------------------------------+
+#define USB_DESC_VID           0x239A
+#define USB_DESC_UF2_PID       0x00DA
+#define USB_DESC_CDC_ONLY_PID  0x00DA
+
+#define UF2_PRODUCT_NAME  "Lilygo"
+#define UF2_VOLUME_LABEL  "TECHOLITE"
+#define UF2_BOARD_ID      "T-Echo-Lite-nRF52840"
+#define UF2_INDEX_URL     "https://www.lilygo.cc/"
+
+#endif // _LILYGO_TECHO_LITE_H

src/boards/lilygo_techo_lite/board.mk

@@ -0,0 +1,2 @@
+MCU_SUB_VARIANT = nrf52840
+CFLAGS += -DDEVICE_NAME='"LTEL_DFU"'

src/boards/lilygo_techo_lite/pinconfig.c

@@ -0,0 +1,28 @@
+#include "boards.h"
+#include "uf2/configkeys.h"
+
+__attribute__((used, section(".bootloaderConfig")))
+const uint32_t bootloaderConfig[] =
+{
+  /* CF2 START */
+  CFG_MAGIC0, CFG_MAGIC1,                       // magic
+  5, 100,                                       // used entries, total entries
+
+  204, 0x100000,                                // FLASH_BYTES = 0x100000
+  205, 0x40000,                                 // RAM_BYTES = 0x40000
+  208, (USB_DESC_VID << 16) | USB_DESC_UF2_PID, // BOOTLOADER_BOARD_ID = USB VID+PID, used for verification when updating bootloader via uf2
+  209, 0xada52840,                              // UF2_FAMILY = 0xada52840
+  210, 0x20,                                    // PINS_PORT_SIZE = PA_32
+
+  0, 0, 0, 0, 0, 0, 0, 0
+  /* CF2 END */
+};
+
+void board_init2(void) {
+  nrf_gpio_cfg_output(PIN_LDO_ENABLE);
+  nrf_gpio_pin_write(PIN_LDO_ENABLE, 1);
+}
+
+void board_teardown2(void) {
+  nrf_gpio_pin_write(PIN_LDO_ENABLE, 0);
+}

src/boards/pca10056/board.cmake

@@ -0,0 +1 @@
+set(MCU_VARIANT nrf52840)

src/boards/pca10056/board.h

@@ -0,0 +1,63 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Ha Thach for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef PCA10056_H
+#define PCA10056_H
+
+/*------------------------------------------------------------------*/
+/* LED
+ *------------------------------------------------------------------*/
+#define LEDS_NUMBER         2
+#define LED_PRIMARY_PIN     13
+#define LED_SECONDARY_PIN   14
+#define LED_STATE_ON        0
+
+/*------------------------------------------------------------------*/
+/* BUTTON
+ *------------------------------------------------------------------*/
+#define BUTTONS_NUMBER      2
+#define BUTTON_1            11
+#define BUTTON_2            12
+#define BUTTON_PULL         NRF_GPIO_PIN_PULLUP
+
+//--------------------------------------------------------------------+
+// BLE OTA
+//--------------------------------------------------------------------+
+#define BLEDIS_MANUFACTURER    "Nordic"
+#define BLEDIS_MODEL           "PCA10056"
+
+//--------------------------------------------------------------------+
+// USB
+//--------------------------------------------------------------------+
+
+// Shared VID/PID with Feather nRF52840, will be disabled for building in the future
+#define USB_DESC_VID           0x239A
+#define USB_DESC_UF2_PID       0x00DA
+#define USB_DESC_CDC_ONLY_PID  0x00DA
+
+#define UF2_PRODUCT_NAME    "Nordic nRF52840 DK"
+#define UF2_BOARD_ID        "nRF52840-pca10056-v1"
+#define UF2_INDEX_URL       "https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK"
+
+#endif // PCA10056_H

src/boards/pca10056/board.mk

@@ -0,0 +1,2 @@
+MCU_SUB_VARIANT = nrf52840
+CFLAGS += -DDEVICE_NAME='"N056_DFU"'

src/boards/pca10056/pinconfig.c

@@ -0,0 +1,19 @@
+#include "boards.h"
+#include "uf2/configkeys.h"
+
+__attribute__((used, section(".bootloaderConfig")))
+const uint32_t bootloaderConfig[] =
+{
+  /* CF2 START */
+  CFG_MAGIC0, CFG_MAGIC1,                       // magic
+  5, 100,                                       // used entries, total entries
+
+  204, 0x100000,                                // FLASH_BYTES = 0x100000
+  205, 0x40000,                                 // RAM_BYTES = 0x40000
+  208, (USB_DESC_VID << 16) | USB_DESC_UF2_PID, // BOOTLOADER_BOARD_ID = USB VID+PID, used for verification when updating bootloader via uf2
+  209, 0xada52840,                              // UF2_FAMILY = 0xada52840
+  210, 0x20,                                    // PINS_PORT_SIZE = PA_32
+
+  0, 0, 0, 0, 0, 0, 0, 0
+  /* CF2 END */
+};

src/boards/wismesh_tag/board.h

@@ -34,8 +34,8 @@
 /* LED
  *------------------------------------------------------------------*/
 #define LEDS_NUMBER           2
-#define LED_PRIMARY_PIN       _PINNUM(1, 4)
-#define LED_SECONDARY_PIN     _PINNUM(1, 3)
+#define LED_PRIMARY_PIN       _PINNUM(1, 3)
+#define LED_SECONDARY_PIN     _PINNUM(1, 4)
 #define LED_STATE_ON          1
 
 /*------------------------------------------------------------------*/
@@ -45,6 +45,7 @@
 #define BUTTON_1              _PINNUM(0, 9)	// Allow booting to OTA DFU from button
 #define BUTTON_2              _PINNUM(0, 9)	// Allow booting to OTA DFU from button
 #define BUTTON_PULL           NRF_GPIO_PIN_PULLUP
+#define BUTTON_DFU_DELAY_MS   500
 
 //--------------------------------------------------------------------+
 // BLE OTA

src/main.c

@@ -248,6 +248,14 @@ static void check_dfu_mode(void) {
   if (dfu_skip) return;
 
   /*------------- Determine DFU mode (Serial, OTA, FRESET or normal) -------------*/
+  // Allow boards wait for button release so that wake presses don't enter DFU
+  #ifdef BUTTON_DFU_DELAY_MS
+  for (uint16_t waited = 0; waited < BUTTON_DFU_DELAY_MS; waited += 10) {
+    if (!button_pressed(BUTTON_DFU) && !button_pressed(BUTTON_FRESET)) break;
+    NRFX_DELAY_MS(10);
+  }
+  #endif
+
   // DFU button pressed
   dfu_start = dfu_start || button_pressed(BUTTON_DFU);