mirror of
https://github.com/mikecarper/MeshCore.git
synced 2026-10-22 22:21:18 +00:00
Merge branch 'dev' into mqtt-bridge-implementation
This commit is contained in:
Adam Gessaman committed
commit
37e51f3eb1
17 files changed
+1043
-162
No files matched your search
@@ -10,11 +10,12 @@
|
||||
},
|
||||
"runArgs": [
|
||||
"--privileged",
|
||||
// arch tty* is owned by uucp (986)
|
||||
// debian tty* is owned by uucp (20) - no change needed
|
||||
"--group-add=986",
|
||||
"--network=host",
|
||||
"--volume=/dev/bus/usb:/dev/bus/usb:ro"
|
||||
"--volume=/dev/bus/usb:/dev/bus/usb:ro",
|
||||
// arch tty* is owned by uucp (986)
|
||||
// debian tty* is owned by dialout (20)
|
||||
"--group-add=20",
|
||||
"--group-add=986"
|
||||
],
|
||||
"postCreateCommand": {
|
||||
"platformio": "pipx install platformio"
|
||||
|
||||
@@ -0,0 +1,881 @@
|
||||
# MeshCore Repeater & Room Server CLI Commands
|
||||
|
||||
## Navigation
|
||||
|
||||
- [Operational](#operational)
|
||||
- [Neighbors](#neighbors-repeater-only)
|
||||
- [Statistics](#statistics)
|
||||
- [Logging](#logging)
|
||||
- [Information](#info)
|
||||
- [Configuration](#configuration)
|
||||
- [Radio](#radio)
|
||||
- [System](#system)
|
||||
- [Routing](#routing)
|
||||
- [ACL](#acl)
|
||||
- [Region Management](#region-management-v110)
|
||||
- [Region Examples](#region-examples)
|
||||
- [GPS](#gps-when-gps-support-is-compiled-in)
|
||||
- [Sensors](#sensors-when-sensor-support-is-compiled-in)
|
||||
- [Bridge](#bridge-when-bridge-support-is-compiled-in)
|
||||
|
||||
---
|
||||
|
||||
## Operational
|
||||
|
||||
### Reboot the node
|
||||
**Usage:**
|
||||
- `reboot`
|
||||
|
||||
---
|
||||
|
||||
### Reset the clock and reboot
|
||||
**Usage:**
|
||||
- `clkreboot`
|
||||
|
||||
---
|
||||
|
||||
### Sync the clock with the remote device
|
||||
**Usage:**
|
||||
- `clock sync`
|
||||
|
||||
---
|
||||
|
||||
### Display current time in UTC
|
||||
**Usage:**
|
||||
- `clock`
|
||||
|
||||
---
|
||||
|
||||
### Set the time to a specific timestamp
|
||||
**Usage:**
|
||||
- `time <epoch_seconds>`
|
||||
|
||||
**Parameters:**
|
||||
- `epoc_seconds`: Unix epoc time
|
||||
|
||||
---
|
||||
|
||||
### Send a flood advert
|
||||
**Usage:**
|
||||
- `advert`
|
||||
|
||||
---
|
||||
|
||||
### Start an Over-The-Air (OTA) firmware update
|
||||
**Usage:**
|
||||
- `start ota`
|
||||
|
||||
---
|
||||
|
||||
### Erase/Factory Reset
|
||||
**Usage:**
|
||||
- `erase`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
**Warning:** _**This is destructive!**_
|
||||
|
||||
---
|
||||
|
||||
## Neighbors (Repeater Only)
|
||||
|
||||
### List nearby neighbors
|
||||
**Usage:**
|
||||
- `neighbors`
|
||||
|
||||
**Note:** The output of this command is limited to the 8 most recent adverts.
|
||||
|
||||
**Note:** Each line is encoded as `{pubkey-prefix}:{timestamp}:{snr*4}`
|
||||
|
||||
---
|
||||
|
||||
### Remove a neighbor
|
||||
**Usage:**
|
||||
- `neighbor.remove <pubkey_prefix>`
|
||||
|
||||
**Parameters:**
|
||||
- `pubkey_prefix`: The public key of the node to remove from the neighbors list
|
||||
|
||||
---
|
||||
|
||||
## Statistics
|
||||
|
||||
### Clear Stats
|
||||
**Usage:** `clear stats`
|
||||
|
||||
---
|
||||
|
||||
### System Stats - Battery, Uptime, Queue Length and Debug Flags
|
||||
**Usage:**
|
||||
- `stats-core`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
---
|
||||
|
||||
### Radio Stats - Noise floor, Last RSSI/SNR, Airtime, Receive errors
|
||||
**Usage:** `stats-radio`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
---
|
||||
|
||||
### Packet stats - Packet counters: Received, Sent
|
||||
**Usage:** `stats-packets`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
---
|
||||
|
||||
## Logging
|
||||
|
||||
### Begin capture of rx log to node storage
|
||||
**Usage:** `log start`
|
||||
|
||||
---
|
||||
|
||||
### End capture of rx log to node sotrage
|
||||
**Usage:** `log stop`
|
||||
|
||||
---
|
||||
|
||||
### Erase captured log
|
||||
**Usage:** `log erase`
|
||||
|
||||
---
|
||||
|
||||
### Print the captured log to the serial terminal
|
||||
**Usage:** `log`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
---
|
||||
|
||||
## Info
|
||||
|
||||
### Get the Version
|
||||
**Usage:** `ver`
|
||||
|
||||
---
|
||||
|
||||
### Show the hardware name
|
||||
**Usage:** `board`
|
||||
|
||||
---
|
||||
|
||||
## Configuration
|
||||
|
||||
### Radio
|
||||
|
||||
#### View or change this node's radio parameters
|
||||
**Usage:**
|
||||
- `get radio`
|
||||
- `set radio <freq>,<bw>,<sf>,<cr>`
|
||||
|
||||
**Parameters:**
|
||||
- `freq`: Frequency in MHz
|
||||
- `bw`: Bandwidth in kHz
|
||||
- `sf`: Spreading factor (5-12)
|
||||
- `cr`: Coding rate (5-8)
|
||||
|
||||
**Set by build flag:** `LORA_FREQ`, `LORA_BW`, `LORA_SF`, `LORA_CR`
|
||||
|
||||
**Default:** `869.525,250,11,5`
|
||||
|
||||
**Note:** Requires reboot to apply
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's transmit power
|
||||
**Usage:**
|
||||
- `get tx`
|
||||
- `set tx <dbm>`
|
||||
|
||||
**Parameters:**
|
||||
- `dbm`: Power level in dBm (1-22)
|
||||
|
||||
**Set by build flag:** `LORA_TX_POWER`
|
||||
|
||||
**Default:** Varies by board
|
||||
|
||||
**Notes:** This setting only controls the power level of the LoRa chip. Some nodes have an additional power amplifier stage which increases the total output. Referr to the node's manual for the correct setting to use. **Setting a value too high may violate the laws in your country.**
|
||||
|
||||
---
|
||||
|
||||
#### Change the radio parameters for a set duration
|
||||
**Usage:**
|
||||
- `tempradio <freq>,<bw>,<sf>,<cr>,<timeout_mins>`
|
||||
|
||||
**Parameters:**
|
||||
- `freq`: Frequency in MHz (300-2500)
|
||||
- `bw`: Bandwidth in kHz (7.8-500)
|
||||
- `sf`: Spreading factor (5-12)
|
||||
- `cr`: Coding rate (5-8)
|
||||
- `timeout_mins`: Duration in minutes (must be > 0)
|
||||
|
||||
**Note:** This is not saved to preferences and will clear on reboot
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's frequency
|
||||
**Usage:**
|
||||
- `get freq`
|
||||
- `set freq <frequency>`
|
||||
|
||||
**Parameters:**
|
||||
- `frequency`: Frequency in MHz
|
||||
|
||||
**Default:** `869.525`
|
||||
|
||||
**Note:** Requires reboot to apply
|
||||
|
||||
### System
|
||||
|
||||
#### View or change this node's name
|
||||
**Usage:**
|
||||
- `get name`
|
||||
- `set name <name>`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: Node name
|
||||
|
||||
**Set by build flag:** `ADVERT_NAME`
|
||||
|
||||
**Default:** Varies by board
|
||||
|
||||
**Note:** Max length varies. If a location is set, the max length is 24 bytes; 32 otherwise. Emoji and unicode characters may take more than one byte.
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's latitude
|
||||
**Usage:**
|
||||
- `get lat`
|
||||
- `set lat <degrees>`
|
||||
|
||||
**Set by build flag:** `ADVERT_LAT`
|
||||
|
||||
**Default:** `0`
|
||||
|
||||
**Parameters:**
|
||||
- `degrees`: Latitude in degrees
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's longitude
|
||||
**Usage:**
|
||||
- `get lon`
|
||||
- `set lon <degrees>`
|
||||
|
||||
**Set by build flag:** `ADVERT_LON`
|
||||
|
||||
**Default:** `0`
|
||||
|
||||
**Parameters:**
|
||||
- `degrees`: Longitude in degrees
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's identity (Private Key)
|
||||
**Usage:**
|
||||
- `get prv.key`
|
||||
- `set prv.key <private_key>`
|
||||
|
||||
**Parameters:**
|
||||
- `private_key`: Private key in hex format (64 hex characters)
|
||||
|
||||
**Serial Only:**
|
||||
- `get prv.key`: Yes
|
||||
- `set prv.key`: No
|
||||
|
||||
**Note:** Requires reboot to take effect after setting
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's admin password
|
||||
**Usage:**
|
||||
- `get password`
|
||||
- `set password <password>`
|
||||
|
||||
**Parameters:**
|
||||
- `password`: Admin password
|
||||
|
||||
**Set by build flag:** `ADMIN_PASSWORD`
|
||||
|
||||
**Default:** `password`
|
||||
|
||||
**Note:** Echoed back for confirmation
|
||||
|
||||
**Note:** Any node using this password will be added to the admin ACL list.
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's guest password
|
||||
**Usage:**
|
||||
- `get guest.password`
|
||||
- `set guest.password <password>`
|
||||
|
||||
**Parameters:**
|
||||
- `password`: Guest password
|
||||
|
||||
**Set by build flag:** `ROOM_PASSWORD` (Room Server only)
|
||||
|
||||
**Default:** `<blank>`
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's owner info
|
||||
**Usage:**
|
||||
- `get owner.info`
|
||||
- `set owner.info <text>`
|
||||
|
||||
**Parameters:**
|
||||
- `text`: Owner information text
|
||||
|
||||
**Default:** `<blank>`
|
||||
|
||||
**Note:** `|` characters are translated to newlines
|
||||
|
||||
**Note:** Requires firmware 1.12.+
|
||||
|
||||
---
|
||||
|
||||
#### Fine-tune the battery reading
|
||||
**Usage:**
|
||||
- `get adc.multiplier`
|
||||
- `set adc.multiplier <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: ADC multiplier (0.0-10.0)
|
||||
|
||||
**Default:** `0.0` (value defined by board)
|
||||
|
||||
**Note:** Returns "Error: unsupported by this board" if hardware doesn't support it
|
||||
|
||||
---
|
||||
|
||||
#### View or change this node's power saving flag (Repeater Only)
|
||||
**Usage:**
|
||||
- `powersaving <state>`
|
||||
- `powersaving`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on`|`off`
|
||||
|
||||
**Default:** `on`
|
||||
|
||||
**Note:** When enabled, device enters sleep mode between radio transmissions
|
||||
|
||||
---
|
||||
|
||||
### Routing
|
||||
|
||||
#### View or change this node's repeat flag
|
||||
**Usage:**
|
||||
- `get repeat`
|
||||
- `set repeat <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on`|`off`
|
||||
|
||||
**Default:** `on`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the retransmit delay factor for flood traffic
|
||||
**Usage:**
|
||||
- `get txdelay`
|
||||
- `set txdelay <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: Transmit delay factor (0-2)
|
||||
|
||||
**Default:** `0.5`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the retransmit delay factor for direct traffic
|
||||
**Usage:**
|
||||
- `get direct.txdelay`
|
||||
- `set direct.txdelay <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: Direct transmit delay factor (0-2)
|
||||
|
||||
**Default:** `0.2`
|
||||
|
||||
---
|
||||
|
||||
#### [Experimental] View or change the processing delay for received traffic
|
||||
**Usage:**
|
||||
- `get rxdelay`
|
||||
- `set rxdelay <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: Receive delay base (0-20)
|
||||
|
||||
**Default:** `0.0`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the airtime factor (duty cycle limit)
|
||||
**Usage:**
|
||||
- `get af`
|
||||
- `set af <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: Airtime factor (0-9)
|
||||
|
||||
**Default:** `1.0`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the local interference threshold
|
||||
**Usage:**
|
||||
- `get int.thresh`
|
||||
- `set int.thresh <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: Interference threshold value
|
||||
|
||||
**Default:** `0.0`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the AGC Reset Interval
|
||||
**Usage:**
|
||||
- `get agc.reset.interval`
|
||||
- `set agc.reset.interval <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: Interval in seconds rounded down to a multiple of 4 (17 becomes 16)
|
||||
|
||||
**Default:** `0.0`
|
||||
|
||||
---
|
||||
|
||||
#### Enable or disable Multi-Acks support
|
||||
**Usage:**
|
||||
- `get multi.acks`
|
||||
- `set multi.acks <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `0` (disable) or `1` (enable)
|
||||
|
||||
**Default:** `0`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the flood advert interval
|
||||
**Usage:**
|
||||
- `get flood.advert.interval`
|
||||
- `set flood.advert.interval <hours>`
|
||||
|
||||
**Parameters:**
|
||||
- `hours`: Interval in hours (3-168)
|
||||
|
||||
**Default:** `12` (Repeater) - `0` (Sensor)
|
||||
|
||||
---
|
||||
|
||||
#### View or change the zero-hop advert interval
|
||||
**Usage:**
|
||||
- `get advert.interval`
|
||||
- `set advert.interval <minutes>`
|
||||
|
||||
**Parameters:**
|
||||
- `minutes`: Interval in minutes rounded down to the nearest multiple of 2 (61 becomes 60) (60-240)
|
||||
|
||||
**Default:** `0`
|
||||
|
||||
---
|
||||
|
||||
#### Limit the number of hops for a flood message
|
||||
**Usage:**
|
||||
- `get flood.max`
|
||||
- `set flood.max <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `value`: Maximum flood hop count (0-64)
|
||||
|
||||
**Default:** `64`
|
||||
|
||||
---
|
||||
|
||||
### ACL
|
||||
|
||||
#### Add, update or remove permissions for a companion
|
||||
**Usage:**
|
||||
- `setperm <pubkey> <permissions>`
|
||||
|
||||
**Parameters:**
|
||||
- `pubkey`: Companion public key
|
||||
- `permissions`:
|
||||
- `0`: Guest
|
||||
- `1`: Read-only
|
||||
- `2`: Read-write
|
||||
- `3`: Admin
|
||||
|
||||
**Note:** Removes the entry when `permissions` is omitted
|
||||
|
||||
---
|
||||
|
||||
#### View the current ACL
|
||||
**Usage:**
|
||||
- `get acl`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
---
|
||||
|
||||
#### View or change this room server's 'read-only' flag
|
||||
**Usage:**
|
||||
- `get allow.read.only`
|
||||
- `set allow.read.only <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on` (enable) or `off` (disable)
|
||||
|
||||
**Default:** `off`
|
||||
|
||||
---
|
||||
|
||||
### Region Management (v1.10.+)
|
||||
|
||||
#### Bulk-load region lists
|
||||
**Usage:**
|
||||
- `region load`
|
||||
- `region load <name> [flood_flag]`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: A name of a region. `*` represents the wildcard region
|
||||
|
||||
**Note:** `flood_flag`: Optional `F` to allow flooding
|
||||
|
||||
**Note:** Indentation creates parent-child relationships (max 8 levels)
|
||||
|
||||
**Note:** `region load` with an empty name will not work remotely (it's interactive)
|
||||
|
||||
---
|
||||
|
||||
#### Save any changes to regions made since reboot
|
||||
**Usage:**
|
||||
- `region save`
|
||||
|
||||
---
|
||||
|
||||
#### Allow a region
|
||||
**Usage:**
|
||||
- `region allowf <name>`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: Region name (or `*` for wildcard)
|
||||
|
||||
**Note:** Setting on wildcard `*` allows packets without region transport codes
|
||||
|
||||
---
|
||||
|
||||
#### Block a region
|
||||
**Usage:**
|
||||
- `region denyf <name>`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: Region name (or `*` for wildcard)
|
||||
|
||||
**Note:** Setting on wildcard `*` drops packets without region transport codes
|
||||
|
||||
---
|
||||
|
||||
#### Show information for a region
|
||||
**Usage:**
|
||||
- `region get <name>`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: Region name (or `*` for wildcard)
|
||||
|
||||
---
|
||||
|
||||
#### View or change the home region for this node
|
||||
**Usage:**
|
||||
- `region home`
|
||||
- `region home <name>`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: Region name
|
||||
|
||||
---
|
||||
|
||||
#### Create a new region
|
||||
**Usage:**
|
||||
- `region put <name> [parent_name]`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: Region name
|
||||
- `parent_name`: Parent region name (optional, defaults to wildcard)
|
||||
|
||||
---
|
||||
|
||||
#### Remove a region
|
||||
**Usage:**
|
||||
- `region remove <name>`
|
||||
|
||||
**Parameters:**
|
||||
- `name`: Region name
|
||||
|
||||
**Note:** Must remove all child regions before the region can be removed
|
||||
|
||||
---
|
||||
|
||||
#### View all regions
|
||||
**Usage:**
|
||||
- `region list <filter>`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
**Parameters:**
|
||||
- `filter`: `allowed`|`denied`
|
||||
|
||||
**Note:** Requires firmware 1.12.+
|
||||
|
||||
---
|
||||
|
||||
#### Dump all defined regions and flood permissions
|
||||
**Usage:**
|
||||
- `region`
|
||||
|
||||
**Serial Only:** Yes
|
||||
|
||||
---
|
||||
|
||||
### Region Examples
|
||||
|
||||
**Example 1: Using F Flag with Named Public Region**
|
||||
```
|
||||
region load
|
||||
#Europe F
|
||||
<blank line to end region load>
|
||||
region save
|
||||
```
|
||||
|
||||
**Explanation:**
|
||||
- Creates a region named `#Europe` with flooding enabled
|
||||
- Packets from this region will be flooded to other nodes
|
||||
|
||||
---
|
||||
|
||||
**Example 2: Using Wildcard with F Flag**
|
||||
```
|
||||
region load
|
||||
* F
|
||||
<blank line to end region load>
|
||||
region save
|
||||
```
|
||||
|
||||
**Explanation:**
|
||||
- Creates a wildcard region `*` with flooding enabled
|
||||
- Enables flooding for all regions automatically
|
||||
- Applies only to packets without transport codes
|
||||
|
||||
---
|
||||
|
||||
**Example 3: Using Wildcard Without F Flag**
|
||||
```
|
||||
region load
|
||||
*
|
||||
<blank line to end region load>
|
||||
region save
|
||||
```
|
||||
**Explanation:**
|
||||
- Creates a wildcard region `*` without flooding
|
||||
- This region exists but doesn't affect packet distribution
|
||||
- Used as a default/empty region
|
||||
|
||||
---
|
||||
|
||||
**Example 4: Nested Public Region with F Flag**
|
||||
```
|
||||
region load
|
||||
#Europe F
|
||||
#UK
|
||||
#London
|
||||
#Manchester
|
||||
#France
|
||||
#Paris
|
||||
#Lyon
|
||||
<blank line to end region load>
|
||||
region save
|
||||
```
|
||||
|
||||
**Explanation:**
|
||||
- Creates `#Europe` region with flooding enabled
|
||||
- Adds nested child regions (`#UK`, `#France`)
|
||||
- All nested regions inherit the flooding flag from parent
|
||||
|
||||
---
|
||||
|
||||
**Example 5: Wildcard with Nested Public Regions**
|
||||
```
|
||||
region load
|
||||
* F
|
||||
#NorthAmerica
|
||||
#USA
|
||||
#NewYork
|
||||
#California
|
||||
#Canada
|
||||
#Ontario
|
||||
#Quebec
|
||||
<blank line to end region load>
|
||||
region save
|
||||
```
|
||||
|
||||
**Explanation:**
|
||||
- Creates wildcard region `*` with flooding enabled
|
||||
- Adds nested `#NorthAmerica` hierarchy
|
||||
- Enables flooding for all child regions automatically
|
||||
- Useful for global networks with specific regional rules
|
||||
|
||||
---
|
||||
### GPS (When GPS support is compiled in)
|
||||
|
||||
#### View or change GPS state
|
||||
**Usage:**
|
||||
- `gps`
|
||||
- `gps <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on`|`off`
|
||||
|
||||
**Default:** `off`
|
||||
|
||||
**Note:** Output format: `{status}, {fix}, {sat count}` (when enabled)
|
||||
|
||||
---
|
||||
|
||||
#### Sync this node's clock with GPS time
|
||||
**Usage:**
|
||||
- `gps sync`
|
||||
|
||||
---
|
||||
|
||||
#### Set this node's location based on the GPS coordinates
|
||||
**Usage:**
|
||||
- `gps setloc`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the GPS advert policy
|
||||
**Usage:**
|
||||
- `gps advert`
|
||||
- `gps advert <policy>`
|
||||
|
||||
**Parameters:**
|
||||
- `policy`: `none`|`shared`|`prefs`
|
||||
- `none`: don't include location in adverts
|
||||
- `share`: share gps location (from SensorManager)
|
||||
- `prefs`: location stored in node's lat and lon settings
|
||||
|
||||
**Default:** `prefs`
|
||||
|
||||
---
|
||||
|
||||
### Sensors (When sensor support is compiled in)
|
||||
|
||||
#### View the list of sensors on this node
|
||||
**Usage:** `sensor list [start]`
|
||||
|
||||
**Parameters:**
|
||||
- `start`: Optional starting index (defaults to 0)
|
||||
|
||||
**Note:** Output format: `<var_name>=<value>\n`
|
||||
|
||||
---
|
||||
|
||||
#### View or change thevalue of a sensor
|
||||
**Usage:**
|
||||
- `sensor get <key>`
|
||||
- `sensor set <key> <value>`
|
||||
|
||||
**Parameters:**
|
||||
- `key`: Sensor setting name
|
||||
- `value`: The value to set the sensor to
|
||||
|
||||
---
|
||||
|
||||
### Bridge (When bridge support is compiled in)
|
||||
|
||||
#### View or change the bridge enabled flag
|
||||
**Usage:**
|
||||
- `get bridge.enabled`
|
||||
- `set bridge.enabled <state>`
|
||||
|
||||
**Parameters:**
|
||||
- `state`: `on`|`off`
|
||||
|
||||
**Default:** `off`
|
||||
|
||||
---
|
||||
|
||||
#### View the bridge source
|
||||
**Usage:**
|
||||
- `get bridge.source`
|
||||
|
||||
---
|
||||
|
||||
#### Add a delay to packets routed through this bridge
|
||||
**Usage:**
|
||||
- `get bridge.delay`
|
||||
- `set bridge.delay <ms>`
|
||||
|
||||
**Parameters:**
|
||||
- `ms`: Delay in milliseconds (0-10000)
|
||||
|
||||
**Default:** `500`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the source of packets bridged to the external interface
|
||||
**Usage:**
|
||||
- `get bridge.source`
|
||||
- `set bridge.source <source>`
|
||||
|
||||
**Parameters:**
|
||||
- `source`:
|
||||
- `rx`: bridges received packets
|
||||
- `tx`: bridges transmitted packets
|
||||
|
||||
**Default:** `tx`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the speed of the bridge (RS-232 only)
|
||||
**Usage:**
|
||||
- `get bridge.baud`
|
||||
- `set bridge.baud <rate>`
|
||||
|
||||
**Parameters:**
|
||||
- `rate`: Baud rate (`9600`, `19200`, `38400`, `57600`, or `115200`)
|
||||
|
||||
**Default:** `115200`
|
||||
|
||||
---
|
||||
|
||||
#### View or change the channel used for bridging (ESPNow only)
|
||||
**Usage:**
|
||||
- `get bridge.channel`
|
||||
- `set bridge.channel <channel>`
|
||||
|
||||
**Parameters:**
|
||||
- `channel`: Channel number (1-14)
|
||||
|
||||
---
|
||||
|
||||
#### Set the ESP-Now secret
|
||||
**Usage:**
|
||||
- `get bridge.secret`
|
||||
- `set bridge.secret <secret>`
|
||||
|
||||
**Parameters:**
|
||||
- `secret`: 16-character encryption secret
|
||||
|
||||
**Default:** Varies by board
|
||||
|
||||
---
|
||||
@@ -8,11 +8,11 @@
|
||||
#define FIRMWARE_VER_CODE 8
|
||||
|
||||
#ifndef FIRMWARE_BUILD_DATE
|
||||
#define FIRMWARE_BUILD_DATE "30 Nov 2025"
|
||||
#define FIRMWARE_BUILD_DATE "29 Jan 2026"
|
||||
#endif
|
||||
|
||||
#ifndef FIRMWARE_VERSION
|
||||
#define FIRMWARE_VERSION "v1.11.0"
|
||||
#define FIRMWARE_VERSION "v1.12.0"
|
||||
#endif
|
||||
|
||||
#if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
|
||||
|
||||
@@ -72,11 +72,11 @@ struct NeighbourInfo {
|
||||
};
|
||||
|
||||
#ifndef FIRMWARE_BUILD_DATE
|
||||
#define FIRMWARE_BUILD_DATE "30 Nov 2025"
|
||||
#define FIRMWARE_BUILD_DATE "29 Jan 2026"
|
||||
#endif
|
||||
|
||||
#ifndef FIRMWARE_VERSION
|
||||
#define FIRMWARE_VERSION "v1.11.0"
|
||||
#define FIRMWARE_VERSION "v1.12.0"
|
||||
#endif
|
||||
|
||||
#define FIRMWARE_ROLE "repeater"
|
||||
|
||||
@@ -31,11 +31,11 @@
|
||||
/* ------------------------------ Config -------------------------------- */
|
||||
|
||||
#ifndef FIRMWARE_BUILD_DATE
|
||||
#define FIRMWARE_BUILD_DATE "30 Nov 2025"
|
||||
#define FIRMWARE_BUILD_DATE "29 Jan 2026"
|
||||
#endif
|
||||
|
||||
#ifndef FIRMWARE_VERSION
|
||||
#define FIRMWARE_VERSION "v1.11.0"
|
||||
#define FIRMWARE_VERSION "v1.12.0"
|
||||
#endif
|
||||
|
||||
#ifndef LORA_FREQ
|
||||
|
||||
@@ -33,11 +33,11 @@
|
||||
#define PERM_RECV_ALERTS_HI (1 << 7) // high priority alerts
|
||||
|
||||
#ifndef FIRMWARE_BUILD_DATE
|
||||
#define FIRMWARE_BUILD_DATE "30 Nov 2025"
|
||||
#define FIRMWARE_BUILD_DATE "29 Jan 2026"
|
||||
#endif
|
||||
|
||||
#ifndef FIRMWARE_VERSION
|
||||
#define FIRMWARE_VERSION "v1.11.0"
|
||||
#define FIRMWARE_VERSION "v1.12.0"
|
||||
#endif
|
||||
|
||||
#define FIRMWARE_ROLE "sensor"
|
||||
|
||||
@@ -4,30 +4,6 @@
|
||||
#include <Arduino.h>
|
||||
#include <helpers/NRF52Board.h>
|
||||
|
||||
// LoRa radio module pins for RAK13302
|
||||
#define P_LORA_SCLK 3
|
||||
#define P_LORA_MISO 29
|
||||
#define P_LORA_MOSI 30
|
||||
#define P_LORA_NSS 26
|
||||
#define P_LORA_DIO_1 10
|
||||
#define P_LORA_BUSY 9
|
||||
#define P_LORA_RESET 4
|
||||
#ifndef P_LORA_PA_EN
|
||||
#define P_LORA_PA_EN 31
|
||||
#endif
|
||||
|
||||
//#define PIN_GPS_SDA 13 //GPS SDA pin (output option)
|
||||
//#define PIN_GPS_SCL 14 //GPS SCL pin (output option)
|
||||
// #define PIN_GPS_TX 16 //GPS TX pin
|
||||
// #define PIN_GPS_RX 15 //GPS RX pin
|
||||
#define PIN_GPS_1PPS 17 //GPS PPS pin
|
||||
#define GPS_BAUD_RATE 9600
|
||||
#define GPS_ADDRESS 0x42 //i2c address for GPS
|
||||
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
|
||||
// built-ins
|
||||
#define PIN_VBAT_READ 5
|
||||
#define ADC_MULTIPLIER (3 * 1.73 * 1.187 * 1000)
|
||||
@@ -35,9 +11,13 @@
|
||||
#define PIN_3V3_EN (34)
|
||||
#define WB_IO2 PIN_3V3_EN
|
||||
|
||||
class RAK3401Board : public NRF52BoardDCDC, public NRF52BoardOTA {
|
||||
class RAK3401Board : public NRF52BoardDCDC {
|
||||
protected:
|
||||
#ifdef NRF52_POWER_MANAGEMENT
|
||||
void initiateShutdown(uint8_t reason) override;
|
||||
#endif
|
||||
public:
|
||||
RAK3401Board() : NRF52BoardOTA("RAK3401_OTA") {}
|
||||
RAK3401Board() : NRF52Board("RAK3401_OTA") {}
|
||||
void begin();
|
||||
|
||||
#define BATTERY_SAMPLES 8
|
||||
|
||||
@@ -141,11 +141,6 @@ static const uint8_t AREF = PIN_AREF;
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
#define P_LORA_SCK PIN_SPI1_SCK
|
||||
#define P_LORA_MISO PIN_SPI1_MISO
|
||||
#define P_LORA_MOSI PIN_SPI1_MOSI
|
||||
#define P_LORA_CS 26
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS (26)
|
||||
#define SX126X_DIO1 (10)
|
||||
@@ -157,6 +152,15 @@ static const uint8_t AREF = PIN_AREF;
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
#define P_LORA_SCLK PIN_SPI1_SCK
|
||||
#define P_LORA_MISO PIN_SPI1_MISO
|
||||
#define P_LORA_MOSI PIN_SPI1_MOSI
|
||||
#define P_LORA_NSS SX126X_CS
|
||||
#define P_LORA_DIO_1 SX126X_DIO1
|
||||
#define P_LORA_BUSY SX126X_BUSY
|
||||
#define P_LORA_RESET SX126X_RESET
|
||||
#define P_LORA_PA_EN 31
|
||||
|
||||
// enables 3.3V periphery like GPS or IO Module
|
||||
// Do not toggle this for GPS power savings
|
||||
#define PIN_3V3_EN (34)
|
||||
@@ -173,6 +177,10 @@ static const uint8_t AREF = PIN_AREF;
|
||||
#define PIN_GPS_RX PIN_SERIAL1_RX
|
||||
#define PIN_GPS_TX PIN_SERIAL1_TX
|
||||
|
||||
#define PIN_GPS_1PPS PIN_GPS_PPS
|
||||
#define GPS_BAUD_RATE 9600
|
||||
#define GPS_ADDRESS 0x42 //i2c address for GPS
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (5)
|
||||
#define BATTERY_PIN PIN_A0
|
||||
|
||||
@@ -4,27 +4,6 @@
|
||||
#include <Arduino.h>
|
||||
#include <helpers/NRF52Board.h>
|
||||
|
||||
// LoRa radio module pins for RAK4631
|
||||
#define P_LORA_DIO_1 47
|
||||
#define P_LORA_NSS 42
|
||||
#define P_LORA_RESET RADIOLIB_NC // 38
|
||||
#define P_LORA_BUSY 46
|
||||
#define P_LORA_SCLK 43
|
||||
#define P_LORA_MISO 45
|
||||
#define P_LORA_MOSI 44
|
||||
#define SX126X_POWER_EN 37
|
||||
|
||||
//#define PIN_GPS_SDA 13 //GPS SDA pin (output option)
|
||||
//#define PIN_GPS_SCL 14 //GPS SCL pin (output option)
|
||||
//#define PIN_GPS_TX 16 //GPS TX pin
|
||||
//#define PIN_GPS_RX 15 //GPS RX pin
|
||||
#define PIN_GPS_1PPS 17 //GPS PPS pin
|
||||
#define GPS_BAUD_RATE 9600
|
||||
#define GPS_ADDRESS 0x42 //i2c address for GPS
|
||||
|
||||
#define SX126X_DIO2_AS_RF_SWITCH true
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
// built-ins
|
||||
#define PIN_VBAT_READ 5
|
||||
#define ADC_MULTIPLIER (3 * 1.73 * 1.187 * 1000)
|
||||
|
||||
+29
-12
@@ -144,6 +144,19 @@ extern "C"
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
// LoRa radio module pins for RAK4631
|
||||
#define P_LORA_DIO_1 (47)
|
||||
#define P_LORA_NSS (42)
|
||||
#define P_LORA_RESET (-1)
|
||||
#define P_LORA_BUSY (46)
|
||||
#define P_LORA_SCLK (43)
|
||||
#define P_LORA_MISO (45)
|
||||
#define P_LORA_MOSI (44)
|
||||
#define SX126X_POWER_EN (37)
|
||||
|
||||
#define SX126X_DIO2_AS_RF_SWITCH true
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
@@ -155,19 +168,23 @@ extern "C"
|
||||
#define PIN_WIRE1_SDA (24)
|
||||
#define PIN_WIRE1_SCL (25)
|
||||
|
||||
// QSPI Pins
|
||||
// QSPI occupied by GPIO's
|
||||
#define PIN_QSPI_SCK 3 // 19
|
||||
#define PIN_QSPI_CS 26 // 17
|
||||
#define PIN_QSPI_IO0 30 // 20
|
||||
#define PIN_QSPI_IO1 29 // 21
|
||||
#define PIN_QSPI_IO2 28 // 22
|
||||
#define PIN_QSPI_IO3 2 // 23
|
||||
// QSPI Pins
|
||||
// QSPI occupied by GPIO's
|
||||
#define PIN_QSPI_SCK 3 // 19
|
||||
#define PIN_QSPI_CS 26 // 17
|
||||
#define PIN_QSPI_IO0 30 // 20
|
||||
#define PIN_QSPI_IO1 29 // 21
|
||||
#define PIN_QSPI_IO2 28 // 22
|
||||
#define PIN_QSPI_IO3 2 // 23
|
||||
|
||||
// On-board QSPI Flash
|
||||
// No onboard flash
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
// On-board QSPI Flash
|
||||
// No onboard flash
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
#define PIN_GPS_1PPS 17 //GPS PPS pin
|
||||
#define GPS_BAUD_RATE 9600
|
||||
#define GPS_ADDRESS 0x42 //i2c address for GPS
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
|
||||
@@ -0,0 +1,28 @@
|
||||
#include <Arduino.h>
|
||||
#include "ThinkNodeM3Board.h"
|
||||
#include <Wire.h>
|
||||
|
||||
#include <bluefruit.h>
|
||||
|
||||
void ThinkNodeM3Board::begin() {
|
||||
NRF52Board::begin();
|
||||
btn_prev_state = HIGH;
|
||||
|
||||
Wire.begin();
|
||||
|
||||
delay(10); // give sx1262 some time to power up
|
||||
}
|
||||
|
||||
uint16_t ThinkNodeM3Board::getBattMilliVolts() {
|
||||
int adcvalue = 0;
|
||||
|
||||
analogReference(AR_INTERNAL_2_4);
|
||||
analogReadResolution(ADC_RESOLUTION);
|
||||
delay(10);
|
||||
|
||||
// ADC range is 0..2400mV and resolution is 12-bit (0..4095)
|
||||
adcvalue = analogRead(PIN_VBAT_READ);
|
||||
// Convert the raw value to compensated mv, taking the resistor-
|
||||
// divider into account (providing the actual LIPO voltage)
|
||||
return (uint16_t)((float)adcvalue * ADC_FACTOR);
|
||||
}
|
||||
@@ -0,0 +1,54 @@
|
||||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <MeshCore.h>
|
||||
#include <helpers/NRF52Board.h>
|
||||
|
||||
#define ADC_FACTOR ((1000.0*ADC_MULTIPLIER*AREF_VOLTAGE)/ADC_MAX)
|
||||
|
||||
class ThinkNodeM3Board : public NRF52BoardDCDC {
|
||||
protected:
|
||||
#if NRF52_POWER_MANAGEMENT
|
||||
void initiateShutdown(uint8_t reason) override;
|
||||
#endif
|
||||
uint8_t btn_prev_state;
|
||||
|
||||
public:
|
||||
ThinkNodeM3Board() : NRF52Board("THINKNODE_M3_OTA") {}
|
||||
void begin();
|
||||
uint16_t getBattMilliVolts() override;
|
||||
|
||||
#if defined(P_LORA_TX_LED)
|
||||
void onBeforeTransmit() override {
|
||||
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
|
||||
}
|
||||
void onAfterTransmit() override {
|
||||
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
|
||||
}
|
||||
#endif
|
||||
|
||||
const char* getManufacturerName() const override {
|
||||
return "Elecrow ThinkNode M3";
|
||||
}
|
||||
|
||||
int buttonStateChanged() {
|
||||
#ifdef BUTTON_PIN
|
||||
uint8_t v = digitalRead(BUTTON_PIN);
|
||||
if (v != btn_prev_state) {
|
||||
btn_prev_state = v;
|
||||
return (v == LOW) ? 1 : -1;
|
||||
}
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
// turn off all leds, sd_power_system_off will not do this for us
|
||||
#ifdef P_LORA_TX_LED
|
||||
digitalWrite(P_LORA_TX_LED, LOW);
|
||||
#endif
|
||||
|
||||
// power off board
|
||||
sd_power_system_off();
|
||||
}
|
||||
};
|
||||
@@ -1,14 +0,0 @@
|
||||
#include <Arduino.h>
|
||||
#include "ThinknodeM3Board.h"
|
||||
#include <Wire.h>
|
||||
|
||||
#include <bluefruit.h>
|
||||
|
||||
void ThinknodeM3Board::begin() {
|
||||
Nrf52BoardDCDC::begin();
|
||||
btn_prev_state = HIGH;
|
||||
|
||||
Wire.begin();
|
||||
|
||||
delay(10); // give sx1262 some time to power up
|
||||
}
|
||||
@@ -1,58 +0,0 @@
|
||||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <MeshCore.h>
|
||||
#include <helpers/NRF52Board.h>
|
||||
|
||||
#define ADC_FACTOR ((1000.0*ADC_MULTIPLIER*AREF_VOLTAGE)/ADC_MAX)
|
||||
|
||||
class ThinknodeM3Board : public Nrf52BoardDCDC {
|
||||
protected:
|
||||
uint8_t btn_prev_state;
|
||||
|
||||
public:
|
||||
void begin();
|
||||
|
||||
uint16_t getBattMilliVolts() override {
|
||||
int adcvalue = 0;
|
||||
|
||||
analogReference(AR_INTERNAL_2_4);
|
||||
analogReadResolution(ADC_RESOLUTION);
|
||||
delay(10);
|
||||
|
||||
// ADC range is 0..2400mV and resolution is 12-bit (0..4095)
|
||||
adcvalue = analogRead(PIN_VBAT_READ);
|
||||
// Convert the raw value to compensated mv, taking the resistor-
|
||||
// divider into account (providing the actual LIPO voltage)
|
||||
return (uint16_t)((float)adcvalue * ADC_FACTOR);
|
||||
}
|
||||
|
||||
#if defined(P_LORA_TX_LED)
|
||||
#if !defined(P_LORA_TX_LED_ON)
|
||||
#define P_LORA_TX_LED_ON HIGH
|
||||
#endif
|
||||
void onBeforeTransmit() override {
|
||||
digitalWrite(P_LORA_TX_LED, P_LORA_TX_LED_ON); // turn TX LED on
|
||||
}
|
||||
void onAfterTransmit() override {
|
||||
digitalWrite(P_LORA_TX_LED, !P_LORA_TX_LED_ON); // turn TX LED off
|
||||
}
|
||||
#endif
|
||||
|
||||
const char* getManufacturerName() const override {
|
||||
return "Elecrow ThinkNode M3";
|
||||
}
|
||||
|
||||
int buttonStateChanged() {
|
||||
#ifdef BUTTON_PIN
|
||||
uint8_t v = digitalRead(BUTTON_PIN);
|
||||
if (v != btn_prev_state) {
|
||||
btn_prev_state = v;
|
||||
return (v == LOW) ? 1 : -1;
|
||||
}
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
void powerOff() override { sd_power_system_off(); }
|
||||
};
|
||||
@@ -2,7 +2,7 @@
|
||||
#include "target.h"
|
||||
#include <helpers/sensors/MicroNMEALocationProvider.h>
|
||||
|
||||
ThinknodeM3Board board;
|
||||
ThinkNodeM3Board board;
|
||||
|
||||
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
|
||||
|
||||
@@ -30,26 +30,26 @@ static const uint32_t rfswitch_dios[Module::RFSWITCH_MAX_PINS] = {
|
||||
RADIOLIB_LR11X0_DIO5,
|
||||
RADIOLIB_LR11X0_DIO6,
|
||||
RADIOLIB_NC,
|
||||
RADIOLIB_NC,
|
||||
RADIOLIB_NC,
|
||||
RADIOLIB_NC
|
||||
};
|
||||
|
||||
static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
// mode DIO5 DIO6
|
||||
{ LR11x0::MODE_STBY, {LOW , LOW }},
|
||||
// mode DIO5 DIO6
|
||||
{ LR11x0::MODE_STBY, {LOW , LOW }},
|
||||
{ LR11x0::MODE_RX, {HIGH, LOW }},
|
||||
{ LR11x0::MODE_TX, {HIGH, HIGH }},
|
||||
{ LR11x0::MODE_TX_HP, {LOW , HIGH }},
|
||||
{ LR11x0::MODE_TX_HF, {LOW , LOW }},
|
||||
{ LR11x0::MODE_TX_HF, {LOW , LOW }},
|
||||
{ LR11x0::MODE_GNSS, {LOW , LOW }},
|
||||
{ LR11x0::MODE_WIFI, {LOW , LOW }},
|
||||
{ LR11x0::MODE_WIFI, {LOW , LOW }},
|
||||
END_OF_MODE_TABLE,
|
||||
};
|
||||
#endif
|
||||
|
||||
bool radio_init() {
|
||||
rtc_clock.begin(Wire);
|
||||
|
||||
|
||||
#ifdef LR11X0_DIO3_TCXO_VOLTAGE
|
||||
float tcxo = LR11X0_DIO3_TCXO_VOLTAGE;
|
||||
#else
|
||||
@@ -64,7 +64,7 @@ bool radio_init() {
|
||||
Serial.println(status);
|
||||
return false; // fail
|
||||
}
|
||||
|
||||
|
||||
radio.setCRC(2);
|
||||
radio.explicitHeader();
|
||||
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
#define RADIOLIB_STATIC_ONLY 1
|
||||
#include <RadioLib.h>
|
||||
#include <helpers/radiolib/RadioLibWrappers.h>
|
||||
#include "ThinknodeM3Board.h"
|
||||
#include "ThinkNodeM3Board.h"
|
||||
#include <helpers/radiolib/CustomLR1110Wrapper.h>
|
||||
#include <helpers/ArduinoHelpers.h>
|
||||
#include <helpers/sensors/EnvironmentSensorManager.h>
|
||||
@@ -17,7 +17,7 @@
|
||||
extern NullDisplayDriver display;
|
||||
#endif
|
||||
|
||||
extern ThinknodeM3Board board;
|
||||
extern ThinkNodeM3Board board;
|
||||
extern WRAPPER_CLASS radio_driver;
|
||||
extern AutoDiscoverRTCClock rtc_clock;
|
||||
extern EnvironmentSensorManager sensors;
|
||||
|
||||
@@ -12,9 +12,14 @@
|
||||
#define PIN_VBAT_READ BATTERY_PIN
|
||||
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
|
||||
|
||||
class ThinkNodeM6Board : public Nrf52BoardOTA {
|
||||
class ThinkNodeM6Board : public NRF52BoardDCDC {
|
||||
protected:
|
||||
#if NRF52_POWER_MANAGEMENT
|
||||
void initiateShutdown(uint8_t reason) override;
|
||||
#endif
|
||||
|
||||
public:
|
||||
ThinkNodeM6Board() : NRF52BoardOTA("THINKNODE_M1_OTA") {}
|
||||
ThinkNodeM6Board() : NRF52Board("THINKNODE_M6_OTA") {}
|
||||
void begin();
|
||||
uint16_t getBattMilliVolts() override;
|
||||
|
||||
@@ -25,10 +30,10 @@ public:
|
||||
void onAfterTransmit() override {
|
||||
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
const char* getManufacturerName() const override {
|
||||
return "Elecrow ThinkNode-M6";
|
||||
return "Elecrow ThinkNode M6";
|
||||
}
|
||||
|
||||
void powerOff() override {
|
||||
|
||||
Reference in new issue
Block a user