Combine Full profiles into one linked overview

README.md

@@ -6,9 +6,7 @@
 * **[Flood retries that account for network topology](https://mikecarper.github.io/MeshCore/halo_keymind_settings/#flood-and-advert-settings).** Configure retry counts, path limits, packet-type limits, target prefixes, ignored repeaters, and channel-specific eligibility. Bridge buckets keep retrying until traffic is heard on the intended sides of a relay or the retry budget expires. Qualifying echoes cancel unnecessary attempts.
 * **[Enhanced direct-message and direct-route retries](https://mikecarper.github.io/MeshCore/halo_keymind_settings/#direct-retry-settings).** Adapt the coding rate across bounded retry attempts and cancel unnecessary retries when a qualifying echo is heard.
 * **[Enhanced telemetry history](https://mikecarper.github.io/MeshCore/telemetry_decoder/).** Send compact temperature and battery-voltage snapshots of up to 165 samples per packet, plus external-voltage history in chunks. Read retained GPS history through the CLI; GPS history is not included in the automatic telemetry packets. Decode snapshots and CLI history in the browser.
-* **[Full firmware profiles](https://mikecarper.github.io/MeshCore/firmware_picker/#full-versus-standard).** ESP32 Full images combine the exact board and role's supported features, selected through runtime settings, with documented capacity exceptions. Expanded Full images need matching application slots and may require a partition migration. Qualified nRF52 repeater, room-server, and sensor builds offer separate Full supported sensors and Reduced sensors packages, both with LoRa OTA; Reduced omits selected optional sensor drivers while retaining generic I2C and supported board peripherals.
-* **[Unified Full Companion firmware](https://mikecarper.github.io/MeshCore/companion_radio_full/).** Combines the target's supported USB, BLE, WiFi, and Ethernet/serial transports in one image, with runtime controls and a LoRa firmware-serving mode. Most supported targets can operate multiple transports together; some boards have explicit transport restrictions.
-* **[Combined ESP32 infrastructure bridges](https://mikecarper.github.io/MeshCore/espnow_bridge_setup/).** Supported Full images combine MQTT, ESP-NOW, and RS-232 where the board provides those interfaces. Enable each transport independently at runtime; boards with capacity exceptions retain separate images.
+* **[Full firmware profiles, Companion transports, and ESP32 bridges](https://mikecarper.github.io/MeshCore/full_profiles/).** Full combines the exact board and role's supported features with runtime controls: Companion transports and firmware serving, or qualified ESP32 infrastructure services and MQTT/ESP-NOW/RS-232 bridges. The guide explains capacity exceptions, matching application slots and partition migrations, and nRF52 Full/Reduced supported-sensor packages with LoRa OTA.
 * **[Operational reporting and alerts](https://mikecarper.github.io/MeshCore/management_reports/).** Adds optional management reports with firmware version, bootloader version, LoRa update capabilities, uptime, and historical voltage and temperature ranges.
 * **[Set time using the LoRa network](https://mikecarper.github.io/MeshCore/cli_commands/#estimate-and-correct-infrastructure-node-time-after-startup).** Infrastructure nodes can estimate time from fresh mesh evidence and correct their clocks when a consensus is available. Successful manual, GPS, or NTP synchronization takes precedence until reboot.
 * **[Companion Bluetooth privacy and recovery improvements](https://mikecarper.github.io/MeshCore/companion_radio_full/#interfaces).** Configurable MAC address policies, paired-peer stealth behavior, and changes to reconnect, subscription, and startup handling on supported Bluetooth targets.