deploy: aa317abbb0

cli_commands/index.html

@@ -10321,6 +10321,17 @@ Setting a clock alone never automatically resets this table.</p>
 <p><strong>Parameters:</strong>
 - <code>state</code>: <code>on</code> (enable) or <code>off</code> (disable)</p>
 <p><strong>Default:</strong> <code>off</code></p>
+<p><strong>Make a room read-only while allowing selected writers:</strong></p>
+<pre><code class="language-text">set allow.read.only on
+setperm &lt;PUBKEY_USER_1&gt; 2
+</code></pre>
+<p>With read-only mode on, a client without a valid room password can join as a
+read-only guest. Permission <code>2</code> gives the specified public key read-write
+access. Replace <code>&lt;PUBKEY_USER_1&gt;</code> with the user's full public key and repeat
+<code>setperm</code> for every approved writer.</p>
+<p>This does not remove write access from clients that already know the room
+password. Keep that password private, or replace it, if write access should be
+limited to the explicitly permitted users.</p>
 <hr />
 <h3 id="region-management-v110">Region Management (v1.10.+)</h3>
 <h4 id="bulk-load-region-lists">Bulk-load region lists</h4>

search/search_index.json

@@ -1 +1 @@
-{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"],"fields":{"title":{"boost":1000.0},"text":{"boost":1.0},"tags":{"boost":1000000.0}}},"docs":[{"location":"","title":"Introduction","text":"<p>Welcome to the MeshCore documentation.</p> <p>Below are a few quick start guides.</p> <ul> <li>1.17.1.5 Markdown audit</li> <li>1.17.1.5 USA Cascade release</li> <li>Feature switches by role: Companion, Repeater, Room Server, Sensor</li> <li>USB web console</li> <li>Full Companion feature switches</li> <li>Frequently Asked Questions</li> <li>Firmware Picker</li> <li>Temporary Radio Test Command Generator</li> <li>CLI Commands</li> <li>LoRa CLI Host Service</li> <li>Filter Policy Playground</li> <li>Telemetry Decoder</li> <li>CLI Availability by Firmware Build</li> <li>Classic ESP32 image memory budget</li> <li>Full Companion contact caches and capacity trials</li> <li>Easy LoRa OTA: ESP32 and nRF52 firmware updates</li> <li>Scripted LoRa OTA: Bash and PowerShell</li> <li>nRF52 repeater OTA with external QSPI</li> <li>nRF52 bootloader updates over LoRa</li> <li>MeshTower V2 microSD self-updates</li> <li>GPS Tracking</li> <li>Companion Protocol</li> <li>Companion Offline Message Queue</li> <li>Full Companion: ESP32 and nRF52</li> <li>Full Companion USB CLI and binary switcher</li> <li>Packet Format</li> <li>QR Codes</li> </ul> <p>If you find a mistake in any of our documentation, or find something is missing, please feel free to open a pull request for us to review.</p> <ul> <li>Documentation Source</li> </ul>"},{"location":"WiFi/","title":"WiFi and MQTT by Firmware Type","text":"<p>MeshCore itself does not require WiFi or the internet. LoRa packet exchange, repeating, room servers, companions, and sensors can all operate without either. WiFi is added by particular ESP32 firmware targets for one or more of these purposes:</p> <ul> <li>a TCP connection between a WiFi companion and a phone or computer;</li> <li>the WebConfig browser interface;</li> <li>MQTT uplinking from the radio to internet or LAN brokers;</li> <li>WiFi-assisted OTA services on builds that include them;</li> <li>ESP-NOW bridging, which uses the ESP32's 2.4 GHz radio but is not a connection   to a WiFi access point.</li> </ul> <p>The firmware role and the build profile are separate choices. USB logging does not itself provide MQTT. MQTT-capable Full Companions include that feature without <code>mqtt</code> in their filename; check the artifact capability manifest. See feature switches by role for the different Companion and infrastructure controls and the USB web console.</p>"},{"location":"WiFi/#quick-reference","title":"Quick reference","text":"Firmware target or role Infrastructure WiFi MQTT What WiFi does <code>*_repeater</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_repeater_observer_mqtt</code> Yes Yes Uplinks heard and selected transmitted LoRa packets; repeating remains enabled by default <code>*_room_server</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_room_server_observer_mqtt</code> Yes Yes Runs the room server and uplinks radio traffic <code>*_companion_radio_wifi</code> Yes No Exposes the MeshCore companion protocol on TCP port 5000 <code>*_companion_radio_wifi_mqtt</code> Yes Yes Runs both the TCP companion interface and the MQTT uplink <code>*_companion_radio_full*</code> ESP32, subject to board/transport selection Where compiled on ESP32 Includes supported USB/wireless transports; configure MQTT through WebConfig Dedicated USB, BLE, or serial companion (not Full) No No Uses the transport named by the target instead <code>*_repeater_bridge_espnow</code> Build-dependent on ESP32 No Uses ESP-NOW for its bridge; <code>bridge.format wrapped|raw</code> selects legacy bridge framing or primary-ESP-NOW compatibility; a FULL build also exposes the TCP 5001 LoRa-OTA seeder whenever WiFi is usable RS232 bridge No No Bridges through a serial interface Ethernet repeater/room server No WiFi No Uses wired Ethernet for its role-specific network interface <code>*_sensor</code> Build-dependent on ESP32 No A FULL ESP32 sensor can expose the TCP 5001 LoRa-OTA seeder through its browser-OTA setup AP Terminal-chat or KISS modem No in current targets No Uses LoRa and its role-specific local interface <code>*_lora_ota_no_external_sensors</code> On demand on ESP32 No Lean LoRa-OTA repeater image; ESP32 builds retain the compact <code>start ota</code> browser uploader <p>Direct on-device WiFi and MQTT are currently ESP32 features. nRF52, STM32, and the currently enabled RP2040 targets do not run this MQTT bridge. An nRF52 connected to a Raspberry Pi can still be logged or uplinked by software on the Pi, but that is a separate host-side bridge rather than MQTT running in the radio firmware.</p>"},{"location":"WiFi/#how-the-mqtt-bridge-works","title"Line truncated
+{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"],"fields":{"title":{"boost":1000.0},"text":{"boost":1.0},"tags":{"boost":1000000.0}}},"docs":[{"location":"","title":"Introduction","text":"<p>Welcome to the MeshCore documentation.</p> <p>Below are a few quick start guides.</p> <ul> <li>1.17.1.5 Markdown audit</li> <li>1.17.1.5 USA Cascade release</li> <li>Feature switches by role: Companion, Repeater, Room Server, Sensor</li> <li>USB web console</li> <li>Full Companion feature switches</li> <li>Frequently Asked Questions</li> <li>Firmware Picker</li> <li>Temporary Radio Test Command Generator</li> <li>CLI Commands</li> <li>LoRa CLI Host Service</li> <li>Filter Policy Playground</li> <li>Telemetry Decoder</li> <li>CLI Availability by Firmware Build</li> <li>Classic ESP32 image memory budget</li> <li>Full Companion contact caches and capacity trials</li> <li>Easy LoRa OTA: ESP32 and nRF52 firmware updates</li> <li>Scripted LoRa OTA: Bash and PowerShell</li> <li>nRF52 repeater OTA with external QSPI</li> <li>nRF52 bootloader updates over LoRa</li> <li>MeshTower V2 microSD self-updates</li> <li>GPS Tracking</li> <li>Companion Protocol</li> <li>Companion Offline Message Queue</li> <li>Full Companion: ESP32 and nRF52</li> <li>Full Companion USB CLI and binary switcher</li> <li>Packet Format</li> <li>QR Codes</li> </ul> <p>If you find a mistake in any of our documentation, or find something is missing, please feel free to open a pull request for us to review.</p> <ul> <li>Documentation Source</li> </ul>"},{"location":"WiFi/","title":"WiFi and MQTT by Firmware Type","text":"<p>MeshCore itself does not require WiFi or the internet. LoRa packet exchange, repeating, room servers, companions, and sensors can all operate without either. WiFi is added by particular ESP32 firmware targets for one or more of these purposes:</p> <ul> <li>a TCP connection between a WiFi companion and a phone or computer;</li> <li>the WebConfig browser interface;</li> <li>MQTT uplinking from the radio to internet or LAN brokers;</li> <li>WiFi-assisted OTA services on builds that include them;</li> <li>ESP-NOW bridging, which uses the ESP32's 2.4 GHz radio but is not a connection   to a WiFi access point.</li> </ul> <p>The firmware role and the build profile are separate choices. USB logging does not itself provide MQTT. MQTT-capable Full Companions include that feature without <code>mqtt</code> in their filename; check the artifact capability manifest. See feature switches by role for the different Companion and infrastructure controls and the USB web console.</p>"},{"location":"WiFi/#quick-reference","title":"Quick reference","text":"Firmware target or role Infrastructure WiFi MQTT What WiFi does <code>*_repeater</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_repeater_observer_mqtt</code> Yes Yes Uplinks heard and selected transmitted LoRa packets; repeating remains enabled by default <code>*_room_server</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_room_server_observer_mqtt</code> Yes Yes Runs the room server and uplinks radio traffic <code>*_companion_radio_wifi</code> Yes No Exposes the MeshCore companion protocol on TCP port 5000 <code>*_companion_radio_wifi_mqtt</code> Yes Yes Runs both the TCP companion interface and the MQTT uplink <code>*_companion_radio_full*</code> ESP32, subject to board/transport selection Where compiled on ESP32 Includes supported USB/wireless transports; configure MQTT through WebConfig Dedicated USB, BLE, or serial companion (not Full) No No Uses the transport named by the target instead <code>*_repeater_bridge_espnow</code> Build-dependent on ESP32 No Uses ESP-NOW for its bridge; <code>bridge.format wrapped|raw</code> selects legacy bridge framing or primary-ESP-NOW compatibility; a FULL build also exposes the TCP 5001 LoRa-OTA seeder whenever WiFi is usable RS232 bridge No No Bridges through a serial interface Ethernet repeater/room server No WiFi No Uses wired Ethernet for its role-specific network interface <code>*_sensor</code> Build-dependent on ESP32 No A FULL ESP32 sensor can expose the TCP 5001 LoRa-OTA seeder through its browser-OTA setup AP Terminal-chat or KISS modem No in current targets No Uses LoRa and its role-specific local interface <code>*_lora_ota_no_external_sensors</code> On demand on ESP32 No Lean LoRa-OTA repeater image; ESP32 builds retain the compact <code>start ota</code> browser uploader <p>Direct on-device WiFi and MQTT are currently ESP32 features. nRF52, STM32, and the currently enabled RP2040 targets do not run this MQTT bridge. An nRF52 connected to a Raspberry Pi can still be logged or uplinked by software on the Pi, but that is a separate host-side bridge rather than MQTT running in the radio firmware.</p>"},{"location":"WiFi/#how-the-mqtt-bridge-works","title"Line truncated

terminal_chat_cli/index.html

@@ -3142,11 +3142,11 @@ remain available. See <a href="../full_companion_usb_switcher/">Companion USB CL
 for the state machine and limitations.</p>
 <h2 id="commands">Commands</h2>
 <p>ESP32 and nRF52 Full Companions include an offline World English Bible lookup:</p>
-<pre><code class="language-text">get John 3:16
+<pre><code class="language-text">get reader 3:16
 </code></pre>
-<p>This returns a single complete verse from John, using plain ASCII punctuation
+<p>This returns a single complete verse from the embedded corpus, using plain ASCII punctuation
 with unchanged wording and capitalization, through the local USB/TCP terminal.
-See <a href="https://github.com/mikecarper/MeshCore/blob/keymindCascade/tools/bible/README.md">John lookup and compression</a> for the
+See <a href="https://github.com/mikecarper/MeshCore/blob/keymindCascade/tools/bible/README.md">Reader lookup and compression</a> for the
 source, supported build profiles and memory costs.</p>
 <pre><code>set freq {frequency}
 </code></pre>

v4_pixel5_font_trial/index.html

@@ -3028,7 +3028,7 @@ seconds after startup, holding the button on an ordinary home page enters
 CLI rescue instead; wait for that startup window to finish before opening
 the inbox. Exiting a message preview and the WiFi setup page's hold action
 remain available immediately.</p>
-<p>The hidden <a href="https://github.com/mikecarper/MeshCore/blob/keymindCascade/tools/bible/README.md#on-device-reader">John reader</a>, opened
+<p>The hidden <a href="https://github.com/mikecarper/MeshCore/blob/keymindCascade/tools/bible/README.md#on-device-reader">Reader</a>, opened
 by a long press on the radio page, uses the same button hints. Three taps jump
 to the first verse of the next chapter; four taps jump to the first verse of
 the previous chapter. Chapter navigation stops at the beginning and end of