mirror of
https://github.com/mikecarper/MeshCore.git
synced 2026-10-28 15:53:48 +00:00
deploy: efed592fdb
This commit is contained in:
mikecarper committed
1 parent
8c21c166a3
commit
d35eb13ca3
2 files changed
+14
-9
No files matched your search
@@ -2267,22 +2267,27 @@ layout before installing an image.</p>
|
||||
<li>nRF52 keeps its 8 KiB loop stack. Crypto, contact CRC and background storage
|
||||
work reduce peak stack use and long pauses. OTA metadata is cached after
|
||||
verification instead of repeatedly reopening storage for status displays.</li>
|
||||
<li>
|
||||
<p>T096 and T1 repeater profiles reserve four flood-rule entries to fit the
|
||||
<li>T096 and T1 repeater profiles reserve four flood-rule entries to fit the
|
||||
complete sensor profile with the existing 8 KiB loop stack, 50 neighbors,
|
||||
color framebuffer and OTA arena. Their capability manifests record this
|
||||
capacity limit; heap qualification margins are unchanged.</p>
|
||||
</li>
|
||||
<li>
|
||||
<p>The RAK3401 unified repeater reserves 47 flood-rule entries so its full
|
||||
capacity limit; heap qualification margins are unchanged.</li>
|
||||
<li>The RAK3401 unified repeater reserves 47 flood-rule entries so its full
|
||||
sensor profile, 8 KiB loop stack, 50 neighbors and internal/QSPI OTA stores
|
||||
fit the runtime RAM requirement. Full and reduced sensor images use the
|
||||
same table capacity; the capability reports record this limit.</p>
|
||||
</li>
|
||||
same table capacity; the capability reports record this limit.</li>
|
||||
<li>Flood-policy upgrades accept inactive trailing rows from larger tables.
|
||||
If active rules exceed an image's capacity, the stored file is preserved and
|
||||
policy saves are blocked. The CLI reports the capacity mismatch; install
|
||||
firmware with enough rule slots to recover the complete policy.</li>
|
||||
<li>ESP32 filesystem buffer checks cover the pinned Arduino 3 frameworks used
|
||||
by RC32 and C6 targets and continue rejecting unhonored buffer allocations.</li>
|
||||
<li>Generic ESP-NOW Full Companion retains all Full transports and 100 contacts
|
||||
with a 224-frame offline queue to meet the unchanged runtime RAM requirement.</li>
|
||||
<li>Wio-E5 Mini Companion uses smaller generated code while preserving its
|
||||
filesystem allocation, contacts, channels and physical-button controls.
|
||||
CI compiles its actual Cascade release profile with the full version string.</li>
|
||||
<li>Mesh America preserves download-only installation for hardware cards that
|
||||
require it, including their Full and reduced sensor profiles.</li>
|
||||
</ul>
|
||||
<h2 id="installation">Installation</h2>
|
||||
<p>An ESP32 merged <code>.bin</code> installs bootloader, partitions and application over
|
||||
|
||||
@@ -1 +1 @@
|
||||
{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"],"fields":{"title":{"boost":1000.0},"text":{"boost":1.0},"tags":{"boost":1000000.0}}},"docs":[{"location":"","title":"MeshCore documentation","text":"<p>Choose firmware with the firmware picker. For help with a device already in service, start with the FAQ.</p>"},{"location":"#current-release","title":"Current release","text":"<ul> <li>1.17.1.8 USA Cascade release notes</li> <li>Test Results \u2014 validation archive and 1.17.1.8 Preview 1 qualification evidence</li> </ul>"},{"location":"#documentation","title":"Documentation","text":"<ul> <li>Feature switches by role and Full Companion features</li> <li>Firmware update guide, easy LoRa OTA, and scripted LoRa OTA</li> <li>CLI commands, availability by build, and radio profiles</li> <li>Companion protocol, packet format, and QR codes</li> </ul> <p>The navigation groups the remaining guides under Documentation, including board-specific updates, networking, power, and protocol references.</p>"},{"location":"#tools","title":"Tools","text":"<ul> <li>Firmware picker and USB web console</li> <li>Notification builder and temporary radio test builder</li> <li>Filter policy playground, telemetry decoder, and management report decoder</li> </ul>"},{"location":"#engineering-records","title":"Engineering records","text":"<ul> <li>Research \u2014 design notes, diagnostics, and historical update-chain studies</li> <li>Old Releases \u2014 historical release notes and supporting files</li> </ul> <p>Found a mistake or missing information? Edit the documentation.</p>"},{"location":"WiFi/","title":"WiFi and MQTT by Firmware Type","text":"<p>MeshCore itself does not require WiFi or the internet. LoRa packet exchange, repeating, room servers, companions, and sensors can all operate without either. WiFi is added by particular ESP32 firmware targets for one or more of these purposes:</p> <ul> <li>a TCP connection between a WiFi companion and a phone or computer;</li> <li>the WebConfig browser interface;</li> <li>MQTT uplinking from the radio to internet or LAN brokers;</li> <li>WiFi-assisted OTA services on builds that include them;</li> <li>ESP-NOW bridging, which uses the ESP32's 2.4 GHz radio but is not a connection to a WiFi access point.</li> </ul> <p>The firmware role and the build profile are separate choices. USB logging does not itself provide MQTT. MQTT-capable Full Companions include that feature without <code>mqtt</code> in their filename; check the artifact capability manifest. See feature switches by role for the different Companion and infrastructure controls and the USB web console.</p>"},{"location":"WiFi/#quick-reference","title":"Quick reference","text":"Firmware target or role Infrastructure WiFi MQTT What WiFi does <code>*_repeater</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_repeater_observer_mqtt</code> Yes Yes Uplinks heard and selected transmitted LoRa packets; repeating remains enabled by default <code>*_room_server</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_room_server_observer_mqtt</code> Yes Yes Runs the room server and uplinks radio traffic <code>*_companion_radio_wifi</code> Yes No Exposes the MeshCore companion protocol on TCP port 5000 <code>*_companion_radio_wifi_mqtt</code> Yes Yes Runs both the TCP companion interface and the MQTT uplink <code>*_companion_radio_full*</code> ESP32, subject to board/transport selection Where compiled on ESP32 Includes supported USB/wireless transports; configure MQTT through WebConfig Dedicated USB, BLE, or serial companion (not Full) No No Uses the transport named by the target instead <code>*_repeater_bridge_espnow</code> Build-dependent on ESP32 No Uses ESP-NOW for its bridge; <code>bridge.format wrapped|raw</code> selects legacy bridge framing or primary-ESP-NOW compatibility; a FULL build also exposes the TCP 5001 LoRa-OTA seeder whenever WiFi is usable RS232 bridge No No Bridges through a serial interface Ethernet repeater/room server No WiFi No Uses wired Ethernet for its role-specific network interface <code>*_sensor</code> Build-dependent on ESP32 No A FULL ESP32 sensor can expose the TCP 5001 LoRa-OTA seeder through its browser-OTA setup AP Terminal-chat or KISS modem No in current targets No Uses LoRa and its role-specific local interface <code>*_lora_ota_no_external_sensors</code> On demand on ESP32 No Lean LoRa-OTA repeater image; ESP32 builds retain the compact <code>start ota</code> browser uploader <p>Direct on-device WiFi and MQTT are currently ESP32 features. nRF52, STM32, and the currently enabled RP2040 targets do not run this MQTT bridge. An nRF52 connected to a Raspberry Pi can still be logged or uplinked by software on the Pi, but that is a separate host-side bridge rather than MQTT running in the radio firmware.</p>"},{"Line truncated
|
||||
{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"],"fields":{"title":{"boost":1000.0},"text":{"boost":1.0},"tags":{"boost":1000000.0}}},"docs":[{"location":"","title":"MeshCore documentation","text":"<p>Choose firmware with the firmware picker. For help with a device already in service, start with the FAQ.</p>"},{"location":"#current-release","title":"Current release","text":"<ul> <li>1.17.1.8 USA Cascade release notes</li> <li>Test Results \u2014 validation archive and 1.17.1.8 Preview 1 qualification evidence</li> </ul>"},{"location":"#documentation","title":"Documentation","text":"<ul> <li>Feature switches by role and Full Companion features</li> <li>Firmware update guide, easy LoRa OTA, and scripted LoRa OTA</li> <li>CLI commands, availability by build, and radio profiles</li> <li>Companion protocol, packet format, and QR codes</li> </ul> <p>The navigation groups the remaining guides under Documentation, including board-specific updates, networking, power, and protocol references.</p>"},{"location":"#tools","title":"Tools","text":"<ul> <li>Firmware picker and USB web console</li> <li>Notification builder and temporary radio test builder</li> <li>Filter policy playground, telemetry decoder, and management report decoder</li> </ul>"},{"location":"#engineering-records","title":"Engineering records","text":"<ul> <li>Research \u2014 design notes, diagnostics, and historical update-chain studies</li> <li>Old Releases \u2014 historical release notes and supporting files</li> </ul> <p>Found a mistake or missing information? Edit the documentation.</p>"},{"location":"WiFi/","title":"WiFi and MQTT by Firmware Type","text":"<p>MeshCore itself does not require WiFi or the internet. LoRa packet exchange, repeating, room servers, companions, and sensors can all operate without either. WiFi is added by particular ESP32 firmware targets for one or more of these purposes:</p> <ul> <li>a TCP connection between a WiFi companion and a phone or computer;</li> <li>the WebConfig browser interface;</li> <li>MQTT uplinking from the radio to internet or LAN brokers;</li> <li>WiFi-assisted OTA services on builds that include them;</li> <li>ESP-NOW bridging, which uses the ESP32's 2.4 GHz radio but is not a connection to a WiFi access point.</li> </ul> <p>The firmware role and the build profile are separate choices. USB logging does not itself provide MQTT. MQTT-capable Full Companions include that feature without <code>mqtt</code> in their filename; check the artifact capability manifest. See feature switches by role for the different Companion and infrastructure controls and the USB web console.</p>"},{"location":"WiFi/#quick-reference","title":"Quick reference","text":"Firmware target or role Infrastructure WiFi MQTT What WiFi does <code>*_repeater</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_repeater_observer_mqtt</code> Yes Yes Uplinks heard and selected transmitted LoRa packets; repeating remains enabled by default <code>*_room_server</code> Build-dependent on ESP32 No FULL builds provide WebConfig, browser OTA, and the TCP 5001 LoRa-OTA seeder while WiFi is active <code>*_room_server_observer_mqtt</code> Yes Yes Runs the room server and uplinks radio traffic <code>*_companion_radio_wifi</code> Yes No Exposes the MeshCore companion protocol on TCP port 5000 <code>*_companion_radio_wifi_mqtt</code> Yes Yes Runs both the TCP companion interface and the MQTT uplink <code>*_companion_radio_full*</code> ESP32, subject to board/transport selection Where compiled on ESP32 Includes supported USB/wireless transports; configure MQTT through WebConfig Dedicated USB, BLE, or serial companion (not Full) No No Uses the transport named by the target instead <code>*_repeater_bridge_espnow</code> Build-dependent on ESP32 No Uses ESP-NOW for its bridge; <code>bridge.format wrapped|raw</code> selects legacy bridge framing or primary-ESP-NOW compatibility; a FULL build also exposes the TCP 5001 LoRa-OTA seeder whenever WiFi is usable RS232 bridge No No Bridges through a serial interface Ethernet repeater/room server No WiFi No Uses wired Ethernet for its role-specific network interface <code>*_sensor</code> Build-dependent on ESP32 No A FULL ESP32 sensor can expose the TCP 5001 LoRa-OTA seeder through its browser-OTA setup AP Terminal-chat or KISS modem No in current targets No Uses LoRa and its role-specific local interface <code>*_lora_ota_no_external_sensors</code> On demand on ESP32 No Lean LoRa-OTA repeater image; ESP32 builds retain the compact <code>start ota</code> browser uploader <p>Direct on-device WiFi and MQTT are currently ESP32 features. nRF52, STM32, and the currently enabled RP2040 targets do not run this MQTT bridge. An nRF52 connected to a Raspberry Pi can still be logged or uplinked by software on the Pi, but that is a separate host-side bridge rather than MQTT running in the radio firmware.</p>"},{"Line truncated
|
||||
Reference in new issue
Block a user