Implement radio2, tempradio2, radioat2 and tempradioat2 across Mesh roles,
with RX-only/RX+TX operation, optional preambles and persistent cross-TX
policy. Keep temporary OTA traffic on its profile by default and maintain
independent retry ownership and backoff for each profile.
Use slow-first receive scanning with 4.8-symbol visits and automatic
preambles rounded up in steps of eight. Preserve pending RX, restore power
saving on exit, and discard work bound to changed or expired profiles.
Restore the infrastructure path.hash.mode setter and report unsupported
extra.sf settings consistently. Add CLI, scheduling, scan and retry tests,
setup documentation, and the V4/XIAO hardware validation results.
Validation: 1,422 native tests, eight KISS tests, 63 final focused profile
tests, 18 checks from the staged source, sanitizer-enabled OTA transfers,
and builds for V4 Mesh roles, Full XIAO Companion and nRF52 T1000-E.
Hardware checks cover reception, cross-TX policy, expiry, reboot and OTA
discovery while receiving main-channel adverts.
Integrate ExpressLRS TX module support and its stacked ESP32 heap changes.
Use the approved Linkflow calibration (17-30 dBm), preserve the PA drive
and output path after radio recovery, and keep LoRa OTA enabled.
Preserve stored ACLs and filters on allocation failure, release owned
client/filter buffers, service heap OTA contexts on Companions, release
self-serving workspaces after TempRadio, and reset staged-resume state
when a context is released. Keep manual staging and active operations
alive. Account for all moved allocations in the runtime RAM gate.
Validation: 1,393 native cases; radio-power, heap-context, ACL persistence,
shared-queue transfer, display/inbox, radio receive, and memory regressions.
Firmware builds passed for Linkflow, Heltec V2 Companion, T-Beam MQTT
repeater, Heltec V4 R8 MQTT repeater, RAK4631 repeater, and Indicator Full.
Physical verification awaits access to the currently offline lab Pi.
Persist separate display modes and timeouts in seconds for battery and USB power, expose four controls in WebConfig and CLI, and apply one shared policy across display-equipped roles.
Detect R8 external power from a USB host or calibrated battery voltage above 4.21 V, with cached sampling and hysteresis. Add policy, persistence, browser, and R8 power-detection regression coverage.
Accept the upstream empty-prefix neighbor.remove command after whitespace normalization while preserving invalid-key checks. Cover repeater and room-server removal paths with regression tests.
Fixes#8
Move OTA_HEAP_CONTEXT from two hand-edited envs to a pre-script gated on
build.mcu == "esp32", so every classic ESP32 image gets it and none can drift.
S2/S3/C-series and nRF52 keep the .bss singleton: they have no equivalent
static-DRAM ceiling, so there a guaranteed-present workspace is the better
trade for what is ultimately a recovery path. It has to be a build flag rather
than a header default, because OTA_HEAP_CONTEXT must hold the same value in
every translation unit that sees OtaContext.h - OtaContext.cpp included - and a
header test on CONFIG_IDF_TARGET_ESP32 would depend on include order relative
to sdkconfig.h. The script defers to OTA_SHARED_COMPANION_QUEUE where a Full
Companion recipe already owns the storage.
Fix a gap this exposes in the roles that now use it. Only CLI entry points
acquire the context, so once it was released, a repeater with the temporary
radio profile up would no longer serve or announce its own firmware - LoRa OTA
would look enabled and silently do nothing. ota_service_temp_radio_context()
holds the workspace for exactly the temp-radio window and hands it back
outside it, which is where the saving was coming from anyway. Wired into the
repeater, room server and sensor loops; the Companion keeps its own
acquire-on-host-demand policy, since its context is borrowed from the offline
message queue and must not be taken speculatively.
Static DRAM, classic ESP32 (bytes occupied of a 124,580 region):
Heltec_v2_repeater 108,332 -> 70,732
Heltec_v2_room_server 83,716 -> 68,300
Heltec_v2_companion_radio_ble 123,236 -> 107,772 (was failing on main)
Tbeam_SX1262_repeater 86,932 -> 71,468
Tbeam_SX1262_repeater_observer_mqtt 121,132 -> 83,532 (was failing)
Bind Companion replies to request transports, make dual-CDC USB sessions nonblocking and reconnect-safe, and harden nRF52 watchdog/OTA storage paths. Fix T096 button debounce, display wake, sleep races, and the compact message layout; add exact WisBlock OTA profiles plus expanded native/static/HIL documentation.
Reserve board-specific GPIOs, make ESP-NOW channel/format handling configurable, and coordinate WiFi, BLE, NTP, MQTT, and host actions safely.
Add the Indicator message page, exclusive transport selector, dynamic 480/320 rendering, larger transport typography, pairing cleanup, and corresponding tests and documentation.
Add durable TempRadio, ACL, clock, bridge, GPS/I2C, USB logging, and Indicator recovery safeguards together with expanded automation, build/profile contracts, release metadata, and the hardware validation ledger.
Add selectable shared ESP-NOW channels, raw/wrapped bridge compatibility, and bounded fragmentation for maximum-size packets.\n\nGive ESP32 Full profiles WiFi coexistence, stabilize WebConfig and USB terminal lifecycles, and keep disabled bridges stopped during observer updates.\n\nUpdate generated UI, firmware selection, documentation, and regression coverage.
Adapt the validated fan thermostat, battery ADC calibration, GPS baud, SX1262 register patch, and 1700us PA ramp behavior from mintylinux/Meshcore-T-beam-1W-Firmware to the current board architecture. Also make Arduino 3 full-build dependency switching reliable after standard ESP32 builds and guard the release hardware contract with regression coverage.
mikecarper