startLanMode() took the caller's IP, read before the route lock. A
Wi-Fi/Ethernet switch in between left WebConfig locked to the new link
while advertising the old link's address. It now reads the selected
link's address after lockSwitching(), as startOTAUpdate() already does.
The upstream `password` command saves /prefs.json without reporting the
result, and WebConfig overwrites its reply with "OK". If that write failed
while the later /mqtt.json write succeeded, wifi.setup_complete was set and
the factory password came back after reboot with first-run setup
suppressed. onInitialSetupComplete() now re-saves /prefs.json and records
completion only when it succeeds; otherwise the batch fails, setup stays
open, and no reboot is queued.
The old route is already down or switched away when a transition fires,
so waiting the default 5 s per slot for a DISCONNECTED event only delays
recovery (up to 25 s across five slots). A client whose event is late is
aborted by keepalive and retried by the normal backoff loop, the same as
the token-renewal path's softDisconnect() + reconnect().
- Link down/switch edges now softDisconnect() every started slot instead
of disconnect(). The full stop could wait forever for a DISCONNECTED
event on the Core 0 MQTT task, and it destroyed and recreated every
slot's esp-mqtt task on each Wi-Fi drop, where the bridge previously
stopped none (measured: 62 s deauth, five slots, zero stops).
softDisconnect() is bounded and keeps the task; reconnectSlotClient()
then calls reconnect() on the new route. Rename the transition action
to disconnect_started_slots to match.
- Ethernet no-IP recovery and init retries rebuild the CH390 netif, so
they now run inside the route-switch mutation gate. An OTA/WebConfig
lock taken after maintain() samples the lock count can no longer have
the interface torn down underneath it.
Fold the CH390 overlay and NETWORK_PREFER_ETHERNET into
ThinkNode_M7_{repeater,room_server}_observer_mqtt and drop the separate
*_observer_mqtt_ethernet twins. The env names (and so the OTA manifests)
are unchanged, so existing M7 observers OTA into the Ethernet-preferred
image; without a cable they select stored Wi-Fi after a brief boot probe.
- Guard the boot-time link bootstrap to observer ESP32 builds. It ran
unconditionally in MyMesh::begin(), breaking every non-observer
repeater/room server build (ESP32 and nRF52).
- Rename NetworkInterface -> NetworkLink (class, accessor, files).
Arduino-ESP32 3.x ships its own NetworkInterface class and header,
which broke the ESP32-C6 builds. Drop WiFi.setAutoConnect(), a no-op
on 2.x and removed in 3.x.
- Refresh stored Wi-Fi credentials every bridge tick so the STA
reconnect loop picks up `set wifi.ssid` / `set wifi.pwd` without a
reboot, as the bridge did before the link moved out of it. Skip
reconnects while the SSID is empty.
- Restore the "WiFi connected: <ip>" / "WiFi disconnected: reason N"
debug lines the bridge used to print.
- Alert on Ethernet only once it has held a lease this boot or when no
Wi-Fi is configured; Wi-Fi-only installs of an Ethernet-preferred
image keep Wi-Fi alerts instead of reporting "Ethernet down".
- Record wifi.setup_complete only for Ethernet LAN onboarding, so
Wi-Fi builds keep the SSID-based first-boot portal rule.
- Use seq_cst for the route-switch lock/mutation flag handshake.
- Docs: SNMP RSSI sentinel is -127; describe link-return vs medium-switch
reconnect behavior accurately; note runtime credential pickup.
- Test: unknown keys inside a known /mqtt.json group are ignored, which
keeps wifi.setup_complete downgrade-safe.
The upstream/dev merge kept our side of variants/thinknode_m7/platformio.ini,
losing -D ENABLE_WIFI_INTERFACE and +<helpers/wifi/*.cpp>. Companion WiFi is
now gated on that flag, so the env built silently without WiFi.
Today if a user builds firmware with an incorrect WiFi SSID or password,
they get a generic `WiFi disconnected.` error message.
Extend logging to descirbe the reason that WiFi was disconnected.
I gathered the updated logs for the 3 scenarios below.
```
WiFi: Attempting manual WiFi reconnect...
WiFi: WiFi disconnected (reason=ASSOC_LEAVE). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
```
```
WiFi: WiFi disconnected (reason=NO_AP_FOUND). Flagging for reconnect...
```
```
WiFi: WiFi connected successfully!
WiFi: Got connection
```
Payloads of 166 or 167 bytes previously passed the frame-sized bound
(MAX_CHANNEL_DATA_LENGTH = 167) but were rejected by sendGroupData
against MAX_GROUP_DATA_LENGTH (165), causing ERR_CODE_TABLE_FULL (retry
later) to be returned instead of ERR_CODE_ILLEGAL_ARG.
Fixes#3345
agessaman