feat(boards): add Heltec tracker MQTT observer builds

Credit: @yellowcooln (PR #12). Adds Wireless Tracker v1.1 board
def and MQTT observer envs for v1.1/v2; gate FEM control so v1.1
builds without KCT8103L pins.

MQTT_IMPLEMENTATION.md

@@ -145,6 +145,12 @@ pio run -e Heltec_v3_repeater_observer_mqtt
 # Heltec V4
 pio run -e heltec_v4_repeater_observer_mqtt
 
+# Heltec Wireless Tracker v1.1 / v2
+pio run -e heltec_tracker_v1_1_repeater_observer_mqtt
+pio run -e heltec_tracker_v1_1_room_server_observer_mqtt
+pio run -e heltec_tracker_v2_repeater_observer_mqtt
+pio run -e heltec_tracker_v2_room_server_observer_mqtt
+
 # Station G2
 pio run -e Station_G2_repeater_observer_mqtt
 

boards/heltec_tracker_v1_1.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+      },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_tracker_v2"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker v1.1",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}

variants/heltec_tracker_v2/LoRaFEMControl.cpp

@@ -5,6 +5,7 @@
 
 void LoRaFEMControl::init(void)
 {
+#if defined(P_LORA_PA_POWER) && defined(P_LORA_KCT8103L_PA_CSD) && defined(P_LORA_KCT8103L_PA_CTX)
     pinMode(P_LORA_PA_POWER, OUTPUT);
     digitalWrite(P_LORA_PA_POWER, HIGH);
     rtc_gpio_hold_dis((gpio_num_t)P_LORA_PA_POWER);
@@ -16,32 +17,40 @@ void LoRaFEMControl::init(void)
     pinMode(P_LORA_KCT8103L_PA_CTX, OUTPUT);
     digitalWrite(P_LORA_KCT8103L_PA_CTX, lna_enabled ? LOW : HIGH);
     setLnaCanControl(true);
+#endif
 }
 
 void LoRaFEMControl::setSleepModeEnable(void)
 {
+#if defined(P_LORA_KCT8103L_PA_CSD)
     // shutdown the PA
     digitalWrite(P_LORA_KCT8103L_PA_CSD, LOW);
+#endif
 }
 
 void LoRaFEMControl::setTxModeEnable(void)
 {
+#if defined(P_LORA_KCT8103L_PA_CSD) && defined(P_LORA_KCT8103L_PA_CTX)
     digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
     digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
+#endif
 }
 
 void LoRaFEMControl::setRxModeEnable(void)
 {
+#if defined(P_LORA_KCT8103L_PA_CSD) && defined(P_LORA_KCT8103L_PA_CTX)
     digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
     if (lna_enabled) {
         digitalWrite(P_LORA_KCT8103L_PA_CTX, LOW);
     } else {
         digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
     }
+#endif
 }
 
 void LoRaFEMControl::setRxModeEnableWhenMCUSleep(void)
 {
+#if defined(P_LORA_KCT8103L_PA_CSD) && defined(P_LORA_KCT8103L_PA_CTX)
     digitalWrite(P_LORA_KCT8103L_PA_CSD, HIGH);
     rtc_gpio_hold_en((gpio_num_t)P_LORA_KCT8103L_PA_CSD);
     if (lna_enabled) {
@@ -50,6 +59,7 @@ void LoRaFEMControl::setRxModeEnableWhenMCUSleep(void)
         digitalWrite(P_LORA_KCT8103L_PA_CTX, HIGH);
     }
     rtc_gpio_hold_en((gpio_num_t)P_LORA_KCT8103L_PA_CTX);
+#endif
 }
 
 void LoRaFEMControl::setLNAEnable(bool enabled)

variants/heltec_tracker_v2/platformio.ini

@@ -58,6 +58,56 @@ lib_deps =
   ${sensor_base.lib_deps}
   adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
 
+[Heltec_tracker_v1_1]
+extends = Heltec_tracker_v2
+board = heltec_tracker_v1_1
+build_flags =
+  ${esp32_base.build_flags}
+  ${sensor_base.build_flags}
+  -I variants/heltec_tracker_v2
+  -D HELTEC_TRACKER_V1_1
+  -D ESP32_CPU_FREQ=240
+  -D USE_SX1262
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D P_LORA_TX_LED=18
+  -D P_LORA_DIO_1=14
+  -D P_LORA_NSS=8
+  -D P_LORA_RESET=12
+  -D P_LORA_BUSY=13
+  -D P_LORA_SCLK=9
+  -D P_LORA_MISO=11
+  -D P_LORA_MOSI=10
+  -D LORA_TX_POWER=22
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D SX126X_REGISTER_PATCH=1
+  -D PIN_BOARD_SDA=6
+  -D PIN_BOARD_SCL=17
+  -D PIN_USER_BTN=0
+  -D PIN_TFT_SDA=42   ; SDIN
+  -D PIN_TFT_SCL=41   ; SCLK
+  -D PIN_TFT_DC=40    ; RS (register select)
+  -D PIN_TFT_RST=39   ; RES
+  -D PIN_TFT_CS=38
+  -D USE_PIN_TFT=1
+  -D PIN_VEXT_EN=3   ; Vext is connected to VDD which is also connected to OLED & GPS
+  -D PIN_VEXT_EN_ACTIVE=HIGH
+  -D PIN_TFT_LEDA_CTL=21 ; LEDK (switches on/off via mosfet to create the ground)
+  -D DISPLAY_ROTATION=1
+  -D PIN_GPS_RX=34
+  -D PIN_GPS_TX=33
+  -D PIN_GPS_RESET=35
+  -D PIN_GPS_RESET_ACTIVE=LOW
+  -D GPS_BAUD_RATE=115200
+  -D ENV_INCLUDE_GPS=1
+  -D PIN_ADC_CTRL=2
+  -D PIN_VBAT_READ=1
+build_src_filter = ${Heltec_tracker_v2.build_src_filter}
+lib_deps = ${Heltec_tracker_v2.lib_deps}
+
 [env:heltec_tracker_v2_repeater]
 extends = Heltec_tracker_v2
 build_flags =
@@ -119,6 +169,150 @@ lib_deps =
   ${Heltec_tracker_v2.lib_deps}
   ${esp32_ota.lib_deps}
 
+[env:heltec_tracker_v1_1_repeater_observer_mqtt]
+extends = Heltec_tracker_v1_1
+extra_scripts =
+  ${esp32_base.extra_scripts}
+  pre:scripts/generate_cert_bundle.py
+board_ssl_cert_source = adafruit-full
+board_build.embed_files = src/certs/x509_crt_bundle.bin
+build_flags =
+  ${Heltec_tracker_v1_1.build_flags}
+  -D DISPLAY_CLASS=ST7735Display
+  -D ADVERT_NAME='"MQTT Observer"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_MQTT_BRIDGE=1
+  -D MAX_MQTT_BROKERS=3
+  -D MQTT_MAX_PACKET_SIZE=1024
+  -D MQTT_DEBUG=1
+  -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
+  -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
+build_src_filter = ${Heltec_tracker_v1_1.build_src_filter}
+  +<helpers/bridges/MQTTBridge.cpp>
+  +<helpers/MQTTMessageBuilder.cpp>
+  +<helpers/JWTHelper.cpp>
+  +<helpers/ui/ST7735Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${Heltec_tracker_v1_1.lib_deps}
+  ${esp32_ota.lib_deps}
+  elims/PsychicMqttClient@^0.2.4
+  bblanchon/ArduinoJson
+  arduino-libraries/NTPClient
+  JChristensen/Timezone
+  paulstoffregen/Time@1.6.1
+
+[env:heltec_tracker_v2_repeater_observer_mqtt]
+extends = Heltec_tracker_v2
+extra_scripts =
+  ${esp32_base.extra_scripts}
+  pre:scripts/generate_cert_bundle.py
+board_ssl_cert_source = adafruit-full
+board_build.embed_files = src/certs/x509_crt_bundle.bin
+build_flags =
+  ${Heltec_tracker_v2.build_flags}
+  -D DISPLAY_CLASS=ST7735Display
+  -D ADVERT_NAME='"MQTT Observer"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_MQTT_BRIDGE=1
+  -D MAX_MQTT_BROKERS=3
+  -D MQTT_MAX_PACKET_SIZE=1024
+  -D MQTT_DEBUG=1
+  -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
+  -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
+build_src_filter = ${Heltec_tracker_v2.build_src_filter}
+  +<helpers/bridges/MQTTBridge.cpp>
+  +<helpers/MQTTMessageBuilder.cpp>
+  +<helpers/JWTHelper.cpp>
+  +<helpers/ui/ST7735Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${Heltec_tracker_v2.lib_deps}
+  ${esp32_ota.lib_deps}
+  elims/PsychicMqttClient@^0.2.4
+  bblanchon/ArduinoJson
+  arduino-libraries/NTPClient
+  JChristensen/Timezone
+  paulstoffregen/Time@1.6.1
+
+[env:heltec_tracker_v1_1_room_server_observer_mqtt]
+extends = Heltec_tracker_v1_1
+extra_scripts =
+  ${esp32_base.extra_scripts}
+  pre:scripts/generate_cert_bundle.py
+board_ssl_cert_source = adafruit-full
+board_build.embed_files = src/certs/x509_crt_bundle.bin
+build_flags =
+  ${Heltec_tracker_v1_1.build_flags}
+  -D DISPLAY_CLASS=ST7735Display
+  -D ADVERT_NAME='"Heltec Tracker Room Observer"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+  -D WITH_MQTT_BRIDGE=1
+  -D MAX_MQTT_BROKERS=3
+  -D MQTT_MAX_PACKET_SIZE=1024
+  -D MQTT_DEBUG=1
+  -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
+  -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
+build_src_filter = ${Heltec_tracker_v1_1.build_src_filter}
+  +<helpers/bridges/MQTTBridge.cpp>
+  +<helpers/MQTTMessageBuilder.cpp>
+  +<helpers/JWTHelper.cpp>
+  +<helpers/ui/ST7735Display.cpp>
+  +<../examples/simple_room_server>
+lib_deps =
+  ${Heltec_tracker_v1_1.lib_deps}
+  ${esp32_ota.lib_deps}
+  elims/PsychicMqttClient@^0.2.4
+  bblanchon/ArduinoJson
+  arduino-libraries/NTPClient
+  JChristensen/Timezone
+  paulstoffregen/Time@1.6.1
+
+[env:heltec_tracker_v2_room_server_observer_mqtt]
+extends = Heltec_tracker_v2
+extra_scripts =
+  ${esp32_base.extra_scripts}
+  pre:scripts/generate_cert_bundle.py
+board_ssl_cert_source = adafruit-full
+board_build.embed_files = src/certs/x509_crt_bundle.bin
+build_flags =
+  ${Heltec_tracker_v2.build_flags}
+  -D DISPLAY_CLASS=ST7735Display
+  -D ADVERT_NAME='"Heltec Tracker Room Observer"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+  -D WITH_MQTT_BRIDGE=1
+  -D MAX_MQTT_BROKERS=3
+  -D MQTT_MAX_PACKET_SIZE=1024
+  -D MQTT_DEBUG=1
+  -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
+  -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
+build_src_filter = ${Heltec_tracker_v2.build_src_filter}
+  +<helpers/bridges/MQTTBridge.cpp>
+  +<helpers/MQTTMessageBuilder.cpp>
+  +<helpers/JWTHelper.cpp>
+  +<helpers/ui/ST7735Display.cpp>
+  +<../examples/simple_room_server>
+lib_deps =
+  ${Heltec_tracker_v2.lib_deps}
+  ${esp32_ota.lib_deps}
+  elims/PsychicMqttClient@^0.2.4
+  bblanchon/ArduinoJson
+  arduino-libraries/NTPClient
+  JChristensen/Timezone
+  paulstoffregen/Time@1.6.1
+
 [env:heltec_tracker_v2_terminal_chat]
 extends = Heltec_tracker_v2
 build_flags =