Add support for named packet types in per-slot filters, allowing users
to specify packet types using descriptive names alongside numeric values.
This improves usability and clarity in configuring MQTT slot filters.
Updates include modifications to the parsing logic, WebConfig interface,
and related documentation to reflect the new naming conventions.
Introduce per-slot packet filters to allow users to specify which
packet types are uploaded for each MQTT slot. This feature enhances
the flexibility of the MQTT bridge by enabling users to configure
allowlists for packet types, improving the efficiency of data
transmissions. The implementation includes updates to the WebConfig
interface, internal handling of packet filters, and necessary
modifications to the MQTT preferences structure.
Adds an admin-password field to the setup wizard and the LAN editor, so a
node's password can be set during onboarding and rotated later without a
serial console.
The key maps to the top-level `password` CLI command rather than a `set`
handler, so it is classified separately from WC_ALLOWED_SET_KEYS. It is the
only key granted that treatment, which keeps the allowlist the sole route to
`set` and leaves no general path from a batch to arbitrary CLI commands.
Accepted in both modes: MODE_OFF is refused earlier in handleConfigPost, LAN
required a login to get that far, and the setup AP implies physical proximity.
Restricting rotation to the AP would have forced a bridge outage (`set bridge
off` + `start webconfig ap`) just to change a password.
First onboarding is gated server-side: while the setup AP is up and no WiFi is
configured, a batch that reboots or sets wifi.ssid must also carry a password,
so neither the Advanced editor nor a crafted request can save WiFi and strand
the node on the factory password. The flag is latched at AP start, so a save
that fails partway cannot drop the requirement on retry.
The CLI's `password` command echoes the new secret back in its reply, and
replies are served to the client over the open setup AP, so the reply is
overwritten with "OK" before it can be serialized.
UI: the field lives with the other NodePrefs settings (wizard step 2, and the
Node card on the Radio tab) rather than beside the WiFi password, which is a
different credential. Confirm fields mirror their password twin and are cleared
whenever it is, so a stale confirm value cannot fail a later save as a spurious
mismatch. Validation runs ahead of the WiFi-changed split so a password-only
save is still checked, and reveals the Radio tab before reporting, since the
save bar spans every tab.
Add validation for request IDs in the web configuration server to ensure
they conform to the expected format. Enhance error responses for invalid
or unknown request IDs, improving the robustness of request handling.
Update the web UI to reflect these changes, ensuring that clients can
properly handle errors related to request ID mismatches.
Include detailed instructions for local testing of observer and WiFi
functionality without hardware. Document the use of a mock backend and
Wokwi ESP32-S3 simulation for easier development and testing.
Enhance the MQTT implementation documentation to improve developer
experience and facilitate testing workflows.
Introduce a web configuration portal for easier node management and
provisioning without serial CLI. Enhance MQTT functionality with
improved IATA code validation, dynamic slot management, and
background NTP synchronization. Update web UI elements for better
user experience and security notes regarding open AP usage.
Implemented functionality to generate and compare partition-table
signatures during OTA updates. This enhancement ensures that the
target build's partition layout matches the device's actual layout,
improving the reliability of OTA updates and preventing issues
related to partition changes.
- Switch from PubSub to PsychicMqttClient for async operations and websockets support
- Add support for US and EU Let's Mesh Analyzer servers with JWT authentication.
- Introduce CLI commands to enable/disable analyzer servers.
- Update NodePrefs to store analyzer server settings.
- Modify MQTTBridge to publish status and packet data to analyzer servers via WebSocket MQTT.
- Enhance documentation to reflect new features and configuration options.
agessaman