Commit Graph
2436 Commits
Author SHA1 Message Date
Adam Gessaman 59e262243b Update MQTT implementation instructions
Added instructions for setting mqtt.iata and reorganized steps.
2026-02-23 09:39:54 -08:00
agessaman 2d4b7a647a Enhance MQTT client configuration by setting keepalive interval to 45 seconds to maintain WebSocket connections through Cloudflare proxy. 2026-02-16 09:41:53 -08:00
agessaman 88ce0d33c3 Update platformio.ini for heltec_v4: switch to heltec_v4_oled configuration for MQTT observer and room server environments, adjusting build flags and source filters accordingly. 2026-02-16 08:39:29 -08:00
agessamanandCursor e89cbee844 Merge upstream/dev into mqtt-bridge-implementation
Resolve conflict in heltec_tracker_v2/platformio.ini: keep
SX126X_REGISTER_PATCH=1 from upstream and retain GC1109 comment.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-15 08:24:56 -08:00
ripplebiz 2005977403 Merge pull request #1699 from recrof/m5stack-m6l-build-fix
fix M5Stack Unit M6L build errors
2026-02-15 21:38:00 +11:00
recrof cafc212bb2 fix M5Stack Unit M6L build errors 2026-02-15 11:25:27 +01:00
Scott Powell e2571accbe * ver 1.13.0 2026-02-15 17:24:37 +11:00
ripplebiz 88452c412e Merge pull request #1603 from oltaco/fix-build.sh-for-RP2040-and-STM32
Add RP2040 and STM32 support to build.sh
2026-02-15 16:09:46 +11:00
ripplebiz 2220eca4f3 Merge pull request #1669 from Azuresword/fix/wio-tracker-l1-grove-sensor-v2
Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
2026-02-15 15:55:25 +11:00
ripplebiz a6e741e30e Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon
Add muted icon to show when buzzer is muted
2026-02-15 15:54:33 +11:00
Scott Powell 0abac35744 * client_repeat state now in _DEVICE_INFO response 2026-02-14 16:45:41 +11:00
Scott Powell 564a19d125 * companion client repeat mode support 2026-02-14 15:50:06 +11:00
taco 5df139f3d6 update build.sh to support RP2040 and STM32 2026-02-13 12:43:04 +11:00
taco 77675ab496 add -D ESP32_PLATFORM to esp32_base 2026-02-13 12:01:04 +11:00
Liam Cottle 5ccae4bddc Merge pull request #1671 from recrof/rak3112-fix
fix: usb and ui for rak 3112
2026-02-12 11:39:27 +13:00
Leah fb025fb67e Add muted icon to show when buzzer is muted 2026-02-11 10:00:20 +01:00
Rastislav Vysoky beff18c53b fix usb and build for rak 3112 2026-02-11 09:34:41 +01:00
dylanandClaude Opus 4.6 f720338c03 Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
Sensors connected via the Grove I2C connector (D18/D17) were not detected
because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default.
Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1,
matching the physical Grove connector pinout.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-11 14:12:48 +08:00
ripplebiz e33d93dc7f Merge pull request #1611 from weebl2000/semtech-patch-tracker-v2
Enable register patch heltec tracker v2
2026-02-11 14:04:58 +11:00
ripplebiz 8db42146d1 Merge pull request #1645 from Snayler/Snayler-patch-1
Enable TX LED for LilyGo LoRa32 V2.1_1.6
2026-02-11 13:52:47 +11:00
Liam Cottle e418b0c0ab Merge pull request #1557 from mattzzw/dev
cli_commands.md: `region` available via remote cli in 1.12.0
2026-02-11 11:58:11 +13:00
mattzzw d11d8ea626 Merge branch 'meshcore-dev:dev' into dev 2026-02-10 22:33:43 +01:00
Liam Cottle 4944a46af1 Merge pull request #1638 from thanegill/build_sh-list
build.sh: add list and -l to list firmwares available to build
2026-02-10 22:27:35 +13:00
Liam Cottle 7d7e88e950 Merge pull request #1651 from liamcottle/fix/path-trace-timeout
Fix: Path Trace Timeout
2026-02-10 17:17:50 +13:00
liamcottle bafa2ccd22 fix estimated timeout for multi byte path traces 2026-02-10 17:01:30 +13:00
Snayler 810fd561d2 Enable TX LED for LilyGo LoRa32 V2.1_1.6
Working on my device, green TX LED starts blinking every time I transmit
2026-02-09 23:20:29 +00:00
Adam Gessaman 8b841d9cfd Merge remote-tracking branch 'origin/dev' into mqtt-bridge-implementation 2026-02-09 09:50:44 -08:00
Adam Gessaman f98c663406 Refine memory pressure management in MQTTBridge
- Updated pressure window and threshold constants to differentiate between critical and moderate memory pressure scenarios.
- Enhanced recovery logic to trigger based on specific pressure conditions, improving responsiveness to memory fragmentation.
- Added explicit calls to recreate analyzer client objects during recovery, ensuring proper setup after memory management actions.

These changes aim to optimize memory handling and recovery processes in the MQTTBridge, enhancing overall stability.
2026-02-09 09:48:34 -08:00
ripplebiz 3f33455b4d Merge pull request #1570 from Quency-D/fix-heltec-power-consumption
Fix heltec-v4 power consumption
2026-02-09 16:49:49 +11:00
ripplebiz 248c3107b4 Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
Quency-D 9efb7cb0b6 Merge pull request #2 from weebl2000/pr-1570-fix-heltec-v4-power
Fix double claim, eliminate dead code at compile time
2026-02-09 10:06:59 +08:00
Thane Gill 3ff1394dd2 build.sh: add list and -l to list firmwares available to build. 2026-02-08 14:49:57 -08:00
Michael e4ef6dba3d Merge pull request #2 from agessaman/fix-simplify-kiss-noise-floor
Simplify kiss noise floor
2026-02-08 16:26:25 +01:00
Liam Cottle b1094c2842 Merge pull request #1616 from jbrazio/2026/raknorm
Refactor environment names and build flags for RAK variants
2026-02-09 01:33:26 +13:00
ripplebiz f6fc05601c Merge pull request #1609 from weebl2000/bridge-always-has-work
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle 736ddbfd99 Merge pull request #1620 from thanegill/patch-2
Correct manufacturer name 'Elecrow ThinkNode M5'
2026-02-08 14:07:00 +13:00
Thane Gill 31a2e74ada Correct manufacturer name 'Elecrow ThinkNode M5' 2026-02-07 17:05:51 -08:00
Liam Cottle 10eacc4e95 Merge pull request #1316 from weebl2000/allow-negative-tx
Allow negative tx
2026-02-08 12:43:10 +13:00
João Brázio fcfbb458f8 Refactor environment names and build flags for RAK variants 2026-02-07 21:26:28 +00:00
Wessel Nieboer e8646f5ede Parse as signed int 2026-02-07 16:58:06 +01:00
agessaman 776131e263 simplify kiss noise floor sampling 2026-02-07 07:42:52 -08:00
Wessel Nieboer 23b4baa066 Enable register patch heltec tracker v2 2026-02-07 16:04:01 +01:00
Wessel Nieboer c4c287d01b Bridge always has work (prevents sleep) 2026-02-07 15:39:24 +01:00
ViezeVingertjes f6ebbd978e Remove redundant locals in handleSetRadio 2026-02-07 14:32:11 +01:00
ViezeVingertjes 5157daf1c1 Remove individual HW_RESP_* defines, use HW_RESP() macro directly 2026-02-07 14:24:34 +01:00
ViezeVingertjes 00b44c4114 Remove redundant send/complete/finished callbacks, use Radio interface directly 2026-02-07 14:22:21 +01:00
ViezeVingertjes 362b5eb0a1 Update protocol docs for new response codes and signal reporting 2026-02-07 10:26:08 +01:00
ViezeVingertjes 5ccd99e25f Add toggleable per-packet signal reporting 2026-02-07 10:21:36 +01:00
ViezeVingertjes 7982d1ce1f Use high-bit convention for hardware response codes 2026-02-07 10:21:32 +01:00
ViezeVingertjes 49e7516145 Add KISS UART support 2026-02-07 08:51:52 +01:00