Resolve conflict in variants/heltec_v4/platformio.ini by taking
origin/dev version for PA pin comments and SX126X_RX_BOOSTED_GAIN.
Co-authored-by: Cursor <cursoragent@cursor.com>
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
Added NRF52840 power management core functionality:
- Boot‑voltage lockout
- Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2)
- LPCOMP wake (for voltage-driven shutdowns)
- VBUS wake (for voltage-driven shutdowns)
- Per-board shutdown handler for board-specific tasks
- Exposed CLI queries for power‑management status in CommonCLI.cpp
- Added documentation in docs/nrf52_power_management.md.
- Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards
added pyMC_core to meshcore projects
mentioned Cisien's meshcoretomqtt fork from Andrew-a-g
updated Coding Rate explanation and recommendation
updated radio presets and added how to update presets listed in the app
update instruction to add a node to the Internet Map from the app, and note that you can use the same companion radio to remove the nodes you added previously
add channel and contact QR code URL format
update verbiage on room server's repeat functionality to discourage turning repeat on on room server.
Update repeater flood advert to 3 hours and mentioning pending PR to change that to 12 hours.
updated .mp3 file list for sound customization on t-deck
added instruction to take a screenshot on t-deck
Added link to MeshCore Ultra firmware user guide
update github link from /meshcore to /meshcore-dev
Update current hardware list to point to flasher.meshcore.co.uk
- rewrite Linux firmware update with more detailed instructions
- fix T114 reset typo: double click twice, not once
- add link reference to MeshCore logo on github
- add public channel key for t-deck to the t-deck section
- reference the verbiage "what is meshcore?" on meshcore.co.uk homepage
- rewrite Linux firmware update with more detailed instructions
- fix T114 reset typo: double click twice, not once
- add link reference to MeshCore logo on github
- add public channel key for t-deck to the t-deck section
- reference the verbiage "what is meshcore?" on meshcore.co.uk homepage
Adam Gessaman