* removing ESP32C6 stuff. (causing cache corruptions)

platformio.ini

@@ -47,11 +47,6 @@ lib_deps =
   me-no-dev/ESPAsyncWebServer @ ^3.6.0
   file://arch/esp32/AsyncElegantOTA
 
-; esp32c6 uses arduino framework 3.x
-[esp32c6_base]
-extends = esp32_base
-platform = https://github.com/pioarduino/platform-espressif32.git
-
 ; ----------------- NRF52 ---------------------
 
 [nrf52_base]

variants/lilygo_tlora_c6/platformio.ini

@@ -1,68 +0,0 @@
-[tlora_c6]
-extends = esp32c6_base
-board = esp32-c6-devkitm-1
-board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
-build_flags =
-  ${esp32c6_base.build_flags}
-  -I variants/lilygo_tlora_c6
-  -D ARDUINO_USB_CDC_ON_BOOT=1
-  -D ARDUINO_USB_MODE=1
-  -D P_LORA_TX_LED=7
-  -D P_LORA_SCLK=6
-  -D P_LORA_MISO=1
-  -D P_LORA_MOSI=0
-  -D P_LORA_NSS=18
-  -D P_LORA_DIO_1=23
-  -D P_LORA_BUSY=22
-  -D P_LORA_RESET=21
-  -D PIN_BOARD_SDA=8
-  -D PIN_BOARD_SCL=9
-  -D SX126X_RXEN=15
-  -D SX126X_TXEN=14
-  -D SX126X_DIO2_AS_RF_SWITCH=true
-  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
-  -D SX126X_CURRENT_LIMIT=140
-  -D SX126X_RX_BOOSTED_GAIN=1
-  -D RADIO_CLASS=CustomSX1262
-  -D WRAPPER_CLASS=CustomSX1262Wrapper
-  -D LORA_TX_POWER=22
-  -D DISABLE_WIFI_OTA=1
-build_src_filter = ${esp32c6_base.build_src_filter}
-  +<../variants/lilygo_tlora_c6>
-
-[env:LilyGo_Tlora_c6_Repeater]
-extends = tlora_c6
-build_src_filter = ${tlora_c6.build_src_filter}
-  +<../examples/simple_repeater/main.cpp>
-build_flags =
-  ${tlora_c6.build_flags}
-  -D ADVERT_NAME='"Tlora C6 Repeater"'
-  -D ADVERT_LAT=0.0
-  -D ADVERT_LON=0.0
-  -D ADMIN_PASSWORD='"password"'
-  -D MAX_NEIGHBOURS=8
-;  -D MESH_PACKET_LOGGING=1
-;  -D MESH_DEBUG=1
-lib_deps =
-  ${tlora_c6.lib_deps}
-;  ${esp32_ota.lib_deps}
-
-[env:LilyGo_Tlora_c6_companion_radio_ble]
-extends = tlora_c6
-build_flags = ${tlora_c6.build_flags}
-  -D MAX_CONTACTS=100
-  -D MAX_GROUP_CHANNELS=8
-  -D BLE_PIN_CODE=123456
-  -D BLE_DEBUG_LOGGING=1
-  -D OFFLINE_QUEUE_SIZE=256
-;  -D ENABLE_PRIVATE_KEY_IMPORT=1
-;  -D ENABLE_PRIVATE_KEY_EXPORT=1
-;  -D MESH_PACKET_LOGGING=1
-;  -D MESH_DEBUG=1
-build_src_filter = ${tlora_c6.build_src_filter}
-  +<helpers/esp32/*.cpp>
-  -<helpers/esp32/ESPNOWRadio.cpp>
-  +<../examples/companion_radio>
-lib_deps =
-  ${tlora_c6.lib_deps}
-  densaugeo/base64 @ ~1.4.0

variants/lilygo_tlora_c6/target.cpp

@@ -1,82 +0,0 @@
-#include <Arduino.h>
-#include "target.h"
-
-ESP32Board board;
-
-#if defined(P_LORA_SCLK)
-  static SPIClass spi(0);
-  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
-#else
-  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
-#endif
-
-WRAPPER_CLASS radio_driver(radio, board);
-
-ESP32RTCClock fallback_clock;
-AutoDiscoverRTCClock rtc_clock(fallback_clock);
-SensorManager sensors;
-
-#ifndef LORA_CR
-  #define LORA_CR      5
-#endif
-
-bool radio_init() {
-  fallback_clock.begin();
-  rtc_clock.begin(Wire);
-
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
-#else
-  float tcxo = 1.6f;
-#endif
-
-#if defined(P_LORA_SCLK)
-  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
-#endif
-  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
-  if (status != RADIOLIB_ERR_NONE) {
-    Serial.print("ERROR: radio init failed: ");
-    Serial.println(status);
-    return false;  // fail
-  }
-
-  radio.setCRC(1);
-
-#if defined(SX126X_RXEN) && defined(SX126X_TXEN)
-  radio.setRfSwitchPins(SX126X_RXEN, SX126X_TXEN);
-#endif
-
-#ifdef SX126X_CURRENT_LIMIT
-  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
-#endif
-
-#ifdef SX126X_DIO2_AS_RF_SWITCH
-  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
-#endif
-
-#ifdef SX126X_RX_BOOSTED_GAIN
-  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
-#endif
-
-  return true;  // success
-}
-
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-}
-
-void radio_set_tx_power(uint8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
-mesh::LocalIdentity radio_new_identity() {
-  RadioNoiseListener rng(radio);
-  return mesh::LocalIdentity(&rng);  // create new random identity
-}

variants/lilygo_tlora_c6/target.h

@@ -1,20 +0,0 @@
-#pragma once
-
-#define RADIOLIB_STATIC_ONLY 1
-#include <RadioLib.h>
-#include <helpers/RadioLibWrappers.h>
-#include <helpers/ESP32Board.h>
-#include <helpers/CustomSX1262Wrapper.h>
-#include <helpers/AutoDiscoverRTCClock.h>
-#include <helpers/SensorManager.h>
-
-extern ESP32Board board;
-extern WRAPPER_CLASS radio_driver;
-extern AutoDiscoverRTCClock rtc_clock;
-extern SensorManager sensors;
-
-bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
-mesh::LocalIdentity radio_new_identity();