* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()

examples/companion_radio/MyMesh.cpp

@@ -951,8 +951,8 @@ void MyMesh::begin(bool has_display) {
   addChannel("Public", PUBLIC_GROUP_PSK); // pre-configure Andy's public channel
   _store->loadChannels(this);
 
-  radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
-  radio_set_tx_power(_prefs.tx_power_dbm);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
   radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
   MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
                      radio_driver.getRxBoostedGainMode() ? "Enabled" : "Disabled");
@@ -1374,7 +1374,7 @@ void MyMesh::handleCmdFrame(size_t len) {
       _prefs.client_repeat = repeat;
       savePrefs();
 
-      radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+      radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
       MESH_DEBUG_PRINTLN("OK: CMD_SET_RADIO_PARAMS: f=%d, bw=%d, sf=%d, cr=%d", freq, bw, (uint32_t)sf,
                          (uint32_t)cr);
 
@@ -1391,7 +1391,7 @@ void MyMesh::handleCmdFrame(size_t len) {
     } else {
       _prefs.tx_power_dbm = power;
       savePrefs();
-      radio_set_tx_power(_prefs.tx_power_dbm);
+      radio_driver.setTxPower(_prefs.tx_power_dbm);
       writeOKFrame();
     }
   } else if (cmd_frame[0] == CMD_SET_TUNING_PARAMS) {

examples/companion_radio/main.cpp

@@ -125,7 +125,7 @@ void setup() {
 
   if (!radio_init()) { halt(); }
 
-  fast_rng.begin(radio_get_rng_seed());
+  fast_rng.begin(radio_driver.getRngSeed());
 
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
   InternalFS.begin();

examples/kiss_modem/main.cpp

@@ -56,11 +56,11 @@ void loadOrCreateIdentity() {
 }
 
 void onSetRadio(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio_set_params(freq, bw, sf, cr);
+  radio_driver.setParams(freq, bw, sf, cr);
 }
 
 void onSetTxPower(uint8_t power) {
-  radio_set_tx_power(power);
+  radio_driver.setTxPower(power);
 }
 
 float onGetCurrentRssi() {
@@ -82,7 +82,7 @@ void setup() {
 
   radio_driver.begin();
 
-  rng.begin(radio_get_rng_seed());
+  rng.begin(radio_driver.getRngSeed());
   loadOrCreateIdentity();
 
   sensors.begin();

examples/simple_repeater/MyMesh.cpp

@@ -953,8 +953,8 @@ void MyMesh::begin(FILESYSTEM *fs) {
   }
 #endif
 
-  radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
-  radio_set_tx_power(_prefs.tx_power_dbm);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
 
   radio_driver.setRxBoostedGainMode(_prefs.rx_boosted_gain);
   MESH_DEBUG_PRINTLN("RX Boosted Gain Mode: %s",
@@ -1050,7 +1050,7 @@ void MyMesh::dumpLogFile() {
 }
 
 void MyMesh::setTxPower(int8_t power_dbm) {
-  radio_set_tx_power(power_dbm);
+  radio_driver.setTxPower(power_dbm);
 }
 
 #if defined(USE_SX1262) || defined(USE_SX1268)
@@ -1279,13 +1279,13 @@ void MyMesh::loop() {
 
   if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params
     set_radio_at = 0;                                     // clear timer
-    radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr);
+    radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr);
     MESH_DEBUG_PRINTLN("Temp radio params");
   }
 
   if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig
     revert_radio_at = 0;                                        // clear timer
-    radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+    radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
     MESH_DEBUG_PRINTLN("Radio params restored");
   }
 

examples/simple_repeater/main.cpp

@@ -57,7 +57,7 @@ void setup() {
     halt();
   }
 
-  fast_rng.begin(radio_get_rng_seed());
+  fast_rng.begin(radio_driver.getRngSeed());
 
   FILESYSTEM* fs;
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)

examples/simple_room_server/MyMesh.cpp

@@ -691,8 +691,8 @@ void MyMesh::begin(FILESYSTEM *fs) {
     }
   }
 
-  radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
-  radio_set_tx_power(_prefs.tx_power_dbm);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
 
   updateAdvertTimer();
   updateFloodAdvertTimer();
@@ -796,7 +796,7 @@ void MyMesh::dumpLogFile() {
 }
 
 void MyMesh::setTxPower(int8_t power_dbm) {
-  radio_set_tx_power(power_dbm);
+  radio_driver.setTxPower(power_dbm);
 }
 
 void MyMesh::saveIdentity(const mesh::LocalIdentity &new_id) {
@@ -999,13 +999,13 @@ void MyMesh::loop() {
 
   if (set_radio_at && millisHasNowPassed(set_radio_at)) { // apply pending (temporary) radio params
     set_radio_at = 0;                                     // clear timer
-    radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr);
+    radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr);
     MESH_DEBUG_PRINTLN("Temp radio params");
   }
 
   if (revert_radio_at && millisHasNowPassed(revert_radio_at)) { // revert radio params to orig
     revert_radio_at = 0;                                        // clear timer
-    radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+    radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
     MESH_DEBUG_PRINTLN("Radio params restored");
   }
 

examples/simple_room_server/main.cpp

@@ -35,7 +35,7 @@ void setup() {
 
   if (!radio_init()) { halt(); }
 
-  fast_rng.begin(radio_get_rng_seed());
+  fast_rng.begin(radio_driver.getRngSeed());
 
   FILESYSTEM* fs;
 #if defined(NRF52_PLATFORM)

examples/simple_secure_chat/main.cpp

@@ -562,7 +562,7 @@ void setup() {
 
   if (!radio_init()) { halt(); }
 
-  fast_rng.begin(radio_get_rng_seed());
+  fast_rng.begin(radio_driver.getRngSeed());
 
 #if defined(NRF52_PLATFORM)
   InternalFS.begin();
@@ -577,8 +577,8 @@ void setup() {
   #error "need to define filesystem"
 #endif
 
-  radio_set_params(the_mesh.getFreqPref(), LORA_BW, LORA_SF, LORA_CR);
-  radio_set_tx_power(the_mesh.getTxPowerPref());
+  radio_driver.setParams(the_mesh.getFreqPref(), LORA_BW, LORA_SF, LORA_CR);
+  radio_driver.setTxPower(the_mesh.getTxPowerPref());
 
   the_mesh.showWelcome();
 

examples/simple_sensor/SensorMesh.cpp

@@ -764,8 +764,8 @@ void SensorMesh::begin(FILESYSTEM* fs) {
     }
   }
 
-  radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
-  radio_set_tx_power(_prefs.tx_power_dbm);
+  radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+  radio_driver.setTxPower(_prefs.tx_power_dbm);
 
   updateAdvertTimer();
   updateFloodAdvertTimer();
@@ -842,7 +842,7 @@ void SensorMesh::updateFloodAdvertTimer() {
 }
 
 void SensorMesh::setTxPower(int8_t power_dbm) {
-  radio_set_tx_power(power_dbm);
+  radio_driver.setTxPower(power_dbm);
 }
 
 void SensorMesh::formatStatsReply(char *reply) {
@@ -908,13 +908,13 @@ void SensorMesh::loop() {
 
   if (set_radio_at && millisHasNowPassed(set_radio_at)) {   // apply pending (temporary) radio params
     set_radio_at = 0;  // clear timer
-    radio_set_params(pending_freq, pending_bw, pending_sf, pending_cr);
+    radio_driver.setParams(pending_freq, pending_bw, pending_sf, pending_cr);
     MESH_DEBUG_PRINTLN("Temp radio params");
   }
 
   if (revert_radio_at && millisHasNowPassed(revert_radio_at)) {   // revert radio params to orig
     revert_radio_at = 0;  // clear timer
-    radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
+    radio_driver.setParams(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
     MESH_DEBUG_PRINTLN("Radio params restored");
   }
 

examples/simple_sensor/main.cpp

@@ -68,7 +68,7 @@ void setup() {
 
   if (!radio_init()) { halt(); }
 
-  fast_rng.begin(radio_get_rng_seed());
+  fast_rng.begin(radio_driver.getRngSeed());
 
   FILESYSTEM* fs;
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)

src/helpers/esp32/ESPNOWRadio.cpp

@@ -54,6 +54,10 @@ void ESPNOWRadio::init() {
   }
 }
 
+uint32_t ESPNOWRadio::getRngSeed() {
+  return millis() + intID();  // TODO: where to get some entropy?
+}
+
 void ESPNOWRadio::setTxPower(uint8_t dbm) {
   esp_wifi_set_max_tx_power(dbm * 4);
 }

src/helpers/esp32/ESPNOWRadio.h

@@ -9,6 +9,13 @@ protected:
 public:
   ESPNOWRadio() { n_recv = n_sent = n_recv_errors = 0; }
 
+  uint32_t getRngSeed();
+
+  void setParams(float freq, float bw, uint8_t sf, uint8_t cr) {
+    // no-op
+  }
+  void powerOff() { /* no-op */ }
+
   void init();
   int recvRaw(uint8_t* bytes, int sz) override;
   uint32_t getEstAirtimeFor(int len_bytes) override;

src/helpers/radiolib/CustomLLCC68Wrapper.h

@@ -7,6 +7,15 @@
 class CustomLLCC68Wrapper : public RadioLibWrapper {
 public:
   CustomLLCC68Wrapper(CustomLLCC68& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
+
+  void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override {
+    ((CustomLLCC68 *)_radio)->setFrequency(freq);
+    ((CustomLLCC68 *)_radio)->setSpreadingFactor(sf);
+    ((CustomLLCC68 *)_radio)->setBandwidth(bw);
+    ((CustomLLCC68 *)_radio)->setCodingRate(cr);
+    updatePreamble(sf);
+  }
+
   bool isReceivingPacket() override { 
     return ((CustomLLCC68 *)_radio)->isReceiving();
   }

src/helpers/radiolib/CustomLR1110Wrapper.h

@@ -7,6 +7,15 @@
 class CustomLR1110Wrapper : public RadioLibWrapper {
 public:
   CustomLR1110Wrapper(CustomLR1110& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
+
+  void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override {
+    ((CustomLR1110 *)_radio)->setFrequency(freq);
+    ((CustomLR1110 *)_radio)->setSpreadingFactor(sf);
+    ((CustomLR1110 *)_radio)->setBandwidth(bw);
+    ((CustomLR1110 *)_radio)->setCodingRate(cr);
+    updatePreamble(sf);
+  }
+
   void doResetAGC() override { lr11x0ResetAGC((LR11x0 *)_radio, ((CustomLR1110 *)_radio)->getFreqMHz()); }
   bool isReceivingPacket() override {
     return ((CustomLR1110 *)_radio)->isReceiving();

src/helpers/radiolib/CustomSTM32WLxWrapper.h

@@ -8,6 +8,15 @@
 class CustomSTM32WLxWrapper : public RadioLibWrapper {
 public:
   CustomSTM32WLxWrapper(CustomSTM32WLx& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
+
+  void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override {
+    ((CustomSTM32WLx *)_radio)->setFrequency(freq);
+    ((CustomSTM32WLx *)_radio)->setSpreadingFactor(sf);
+    ((CustomSTM32WLx *)_radio)->setBandwidth(bw);
+    ((CustomSTM32WLx *)_radio)->setCodingRate(cr);
+    updatePreamble(sf);
+  }
+
   bool isReceivingPacket() override { 
     return ((CustomSTM32WLx *)_radio)->isReceiving();
   }

src/helpers/radiolib/CustomSX1262Wrapper.h

@@ -11,6 +11,15 @@
 class CustomSX1262Wrapper : public RadioLibWrapper {
 public:
   CustomSX1262Wrapper(CustomSX1262& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
+
+  void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override {
+    ((CustomSX1262 *)_radio)->setFrequency(freq);
+    ((CustomSX1262 *)_radio)->setSpreadingFactor(sf);
+    ((CustomSX1262 *)_radio)->setBandwidth(bw);
+    ((CustomSX1262 *)_radio)->setCodingRate(cr);
+    updatePreamble(sf);
+  }
+
   bool isReceivingPacket() override { 
     return ((CustomSX1262 *)_radio)->isReceiving();
   }

src/helpers/radiolib/CustomSX1268Wrapper.h

@@ -11,6 +11,15 @@
 class CustomSX1268Wrapper : public RadioLibWrapper {
 public:
   CustomSX1268Wrapper(CustomSX1268& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
+
+  void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override {
+    ((CustomSX1268 *)_radio)->setFrequency(freq);
+    ((CustomSX1268 *)_radio)->setSpreadingFactor(sf);
+    ((CustomSX1268 *)_radio)->setBandwidth(bw);
+    ((CustomSX1268 *)_radio)->setCodingRate(cr);
+    updatePreamble(sf);
+  }
+
   bool isReceivingPacket() override { 
     return ((CustomSX1268 *)_radio)->isReceiving();
   }

src/helpers/radiolib/CustomSX1276Wrapper.h

@@ -10,6 +10,15 @@
 class CustomSX1276Wrapper : public RadioLibWrapper {
 public:
   CustomSX1276Wrapper(CustomSX1276& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }
+
+  void setParams(float freq, float bw, uint8_t sf, uint8_t cr) override {
+    ((CustomSX1276 *)_radio)->setFrequency(freq);
+    ((CustomSX1276 *)_radio)->setSpreadingFactor(sf);
+    ((CustomSX1276 *)_radio)->setBandwidth(bw);
+    ((CustomSX1276 *)_radio)->setCodingRate(cr);
+    updatePreamble(sf);
+  }
+
   bool isReceivingPacket() override { 
     return ((CustomSX1276 *)_radio)->isReceiving();
   }

src/helpers/radiolib/RadioLibWrappers.cpp

@@ -42,6 +42,14 @@ void RadioLibWrapper::begin() {
   _floor_sample_sum = 0;
 }
 
+uint32_t RadioLibWrapper::getRngSeed() {
+  return _radio->random(0x7FFFFFFF);
+}
+
+void RadioLibWrapper::setTxPower(int8_t dbm) {
+  _radio->setOutputPower(dbm);
+}
+
 void RadioLibWrapper::idle() {
   _radio->standby();
   state = STATE_IDLE;   // need another startReceive()

src/helpers/radiolib/RadioLibWrappers.h

@@ -38,6 +38,10 @@ public:
     return isChannelActive();
   }
 
+  virtual void setParams(float freq, float bw, uint8_t sf, uint8_t cr) = 0;
+  uint32_t getRngSeed();
+  void setTxPower(int8_t dbm);
+
   virtual float getCurrentRSSI() =0;
   virtual uint8_t getSpreadingFactor() const { return LORA_SF; }
   static uint16_t preambleLengthForSF(uint8_t sf) { return sf <= 8 ? 32 : 16; }

variants/ebyte_eora_s3/target.cpp

@@ -64,22 +64,6 @@ bool radio_init() {
   return true;  // success
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/ebyte_eora_s3/target.h

@@ -23,7 +23,4 @@ extern SensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/gat562_30s_mesh_kit/target.cpp

@@ -38,21 +38,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/gat562_30s_mesh_kit/target.h

@@ -24,7 +24,4 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/gat562_mesh_evb_pro/target.cpp

@@ -37,21 +37,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/gat562_mesh_evb_pro/target.h

@@ -23,7 +23,4 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/gat562_mesh_tracker_pro/target.cpp

@@ -38,21 +38,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/gat562_mesh_tracker_pro/target.h

@@ -24,7 +24,4 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/gat562_mesh_watch13/target.cpp

@@ -29,21 +29,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/gat562_mesh_watch13/target.h

@@ -25,7 +25,4 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/generic-e22/target.cpp

@@ -27,22 +27,6 @@ bool radio_init() {
   #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/generic-e22/target.h

@@ -15,8 +15,5 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern SensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/generic_espnow/target.cpp

@@ -17,18 +17,6 @@ bool radio_init() {
   return true;  // success
 }
 
-uint32_t radio_get_rng_seed() {
-  return millis() + radio_driver.intID();  // TODO: where to get some entropy?
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  // no-op
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio_driver.setTxPower(dbm);
-}
-
 // NOTE: as we are using the WiFi radio, the ESP_IDF will have enabled hardware RNG:
 //    https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/system/random.html
 class ESP_RNG : public mesh::RNG {

variants/generic_espnow/target.h

@@ -10,7 +10,4 @@ extern ESP32RTCClock rtc_clock;
 extern SensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_ct62/target.cpp

@@ -16,22 +16,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/heltec_ct62/target.h

@@ -14,7 +14,4 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern SensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_e213/target.cpp

@@ -33,22 +33,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/heltec_e213/target.h

@@ -23,7 +23,4 @@ extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_e290/target.cpp

@@ -33,22 +33,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/heltec_e290/target.h

@@ -23,7 +23,4 @@ extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_mesh_solar/target.cpp

@@ -23,22 +23,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/heltec_mesh_solar/target.h

@@ -40,7 +40,4 @@ extern SolarSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_t096/target.cpp

@@ -43,21 +43,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/heltec_t096/target.h

@@ -27,7 +27,4 @@ extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_t114/target.cpp

@@ -43,22 +43,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/heltec_t114/target.h

@@ -29,7 +29,4 @@ extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_t190/target.cpp

@@ -33,22 +33,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/heltec_t190/target.h

@@ -23,7 +23,4 @@ extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_tracker/target.cpp

@@ -37,22 +37,6 @@ bool radio_init() {
 
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/heltec_tracker/target.h

@@ -42,7 +42,4 @@ extern HWTSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_tracker_v2/target.cpp

@@ -39,22 +39,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/heltec_tracker_v2/target.h

@@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/heltec_v2/target.cpp

@@ -32,22 +32,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/heltec_v2/target.h

@@ -23,7 +23,4 @@ extern SensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_v3/target.cpp

@@ -39,22 +39,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/heltec_v3/target.h

@@ -24,7 +24,4 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/heltec_v4/target.cpp

@@ -39,22 +39,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/heltec_v4/target.h

@@ -28,8 +28,5 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/heltec_wireless_paper/target.cpp

@@ -32,22 +32,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/heltec_wireless_paper/target.h

@@ -29,7 +29,4 @@ extern MomentaryButton user_btn;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/ikoka_handheld_nrf/target.cpp

@@ -25,22 +25,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/ikoka_handheld_nrf/target.h

@@ -23,8 +23,5 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/ikoka_nano_nrf/target.cpp

@@ -23,22 +23,6 @@ bool radio_init() {
     return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/ikoka_nano_nrf/target.h

@@ -22,8 +22,5 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/ikoka_stick_nrf/target.cpp

@@ -23,22 +23,6 @@ bool radio_init() {
     return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/ikoka_stick_nrf/target.h

@@ -22,8 +22,5 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/keepteen_lt1/target.cpp

@@ -29,22 +29,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/keepteen_lt1/target.h

@@ -24,8 +24,5 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/lilygo_t3s3/target.cpp

@@ -27,22 +27,6 @@ bool radio_init() {
   return radio.std_init(&spi);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_t3s3/target.h

@@ -23,8 +23,5 @@ extern SensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/lilygo_t3s3_sx1276/target.cpp

@@ -33,22 +33,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_t3s3_sx1276/target.h

@@ -23,7 +23,4 @@ extern SensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tbeam_1w/target.cpp

@@ -43,22 +43,6 @@ bool radio_init() {
   return success;
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);

variants/lilygo_tbeam_1w/target.h

@@ -21,8 +21,5 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/lilygo_tbeam_SX1262/target.cpp

@@ -34,22 +34,6 @@ bool radio_init() {
   return radio.std_init(&spi);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_tbeam_SX1262/target.h

@@ -23,8 +23,5 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/lilygo_tbeam_SX1276/target.cpp

@@ -39,22 +39,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_tbeam_SX1276/target.h

@@ -23,7 +23,4 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tbeam_supreme_SX1262/target.cpp

@@ -31,22 +31,6 @@ bool radio_init() {
   return radio.std_init(&spi);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_tbeam_supreme_SX1262/target.h

@@ -21,7 +21,4 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_tdeck/target.cpp

@@ -34,22 +34,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/lilygo_tdeck/target.h

@@ -25,7 +25,4 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/lilygo_techo/target.cpp

@@ -31,22 +31,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_techo/target.h

@@ -25,8 +25,5 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/lilygo_techo_lite/target.cpp

@@ -30,22 +30,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_techo_lite/target.h

@@ -25,8 +25,5 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/lilygo_tlora_c6/target.cpp

@@ -27,22 +27,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_tlora_c6/target.h

@@ -14,8 +14,5 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern SensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/lilygo_tlora_v2_1/target.cpp

@@ -28,22 +28,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/lilygo_tlora_v2_1/target.h

@@ -23,7 +23,4 @@ extern EnvironmentSensorManager sensors;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/m5stack_unit_c6l/UnitC6LBoard.cpp

@@ -28,22 +28,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(uint8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/m5stack_unit_c6l/target.h

@@ -15,7 +15,4 @@ extern AutoDiscoverRTCClock rtc_clock;
 extern SensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(uint8_t dbm);
 mesh::LocalIdentity radio_new_identity();

variants/mesh_pocket/target.cpp

@@ -23,22 +23,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/mesh_pocket/target.h

@@ -24,9 +24,6 @@ extern AutoDiscoverRTCClock rtc_clock;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 
 extern SensorManager sensors;

variants/meshadventurer/target.cpp

@@ -30,22 +30,6 @@ bool radio_init() {
 #endif
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/meshadventurer/target.h

@@ -43,8 +43,5 @@ extern MASensorManager sensors;
 
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/meshtiny/target.cpp

@@ -26,22 +26,6 @@ bool radio_init() {
   return radio.std_init(&SPI);
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity

variants/meshtiny/target.h

@@ -27,8 +27,5 @@ extern MomentaryButton back_btn;
 #endif
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
 

variants/minewsemi_me25ls01/target.cpp

@@ -77,22 +77,6 @@ bool radio_init() {
   return true;  // success
 }
 
-uint32_t radio_get_rng_seed() {
-  return radio.random(0x7FFFFFFF);
-}
-
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
-  radio.setFrequency(freq);
-  radio.setSpreadingFactor(sf);
-  radio.setBandwidth(bw);
-  radio.setCodingRate(cr);
-  radio_driver.updatePreamble(sf);
-}
-
-void radio_set_tx_power(int8_t dbm) {
-  radio.setOutputPower(dbm);
-}
-
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity

variants/minewsemi_me25ls01/target.h

@@ -23,7 +23,4 @@ extern VolatileRTCClock rtc_clock;
 extern EnvironmentSensorManager sensors;
 
 bool radio_init();
-uint32_t radio_get_rng_seed();
-void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
-void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();